Brickcom VS-01A Series User manual
Video Server
VS-01A Series
User’s Manual
Quality Service Group
Product name:
Video Server (VS-01A series)
Release Date:
2010/10
Manual Revision:
V1.1
Web site:
www.brickcom.com
Email:
technical@brickcom.com
© 2010 Brickcom Corporation. All Rights Reserved
Table of Contents
Before You Use This Product .......................................................................................1
Regulatory Information.................................................................................................2
Chapter 1 - Package Contents......................................................................................3
Chapter 2 - Video Server Overview ..............................................................................4
Chapter 3 - Device Appearance Description ...............................................................6
Chapter 4 - LED Behavior .............................................................................................7
Chapter 5 - Installation................................................................................................10
5.1 Video Server Connection..............................................................................10
5.2 System Requirements...................................................................................13
5.3 Software Installation......................................................................................14
5.3.1EasyConfig ............................................................................................ 22
Chapter 6 - Accessing the Video Server....................................................................30
6.1 Check Video Server.......................................................................................30
6.2 Add Password to Prevent Unauthorized Access........................................30
6.3 Authentication................................................................................................31
6.4 Installing the Plug-In .....................................................................................32
Chapter 7 - Live View...................................................................................................33
Chapter 8 - Configuration ...........................................................................................36
8.1 Camera/Video/Audio......................................................................................36
8.1.1Camera.................................................................................................. 36
8.1.2Video...................................................................................................... 37
8.1.3Audio...................................................................................................... 40
8.1.4Multicast................................................................................................. 41
8.2 Camera Control..............................................................................................42
8.2.1PTZ Configuration.................................................................................. 42
8.3 Network ..........................................................................................................43
8.3.1IP Settings ............................................................................................. 43
8.3.2UPnP ..................................................................................................... 44
8.3.3DDNS (dynamic domain name service)................................................. 45
8.3.4EasyLinkTM............................................................................................. 46
8.3.5Wireless................................................................................................. 47
8.3.6HTTP/HTTPS......................................................................................... 54
8.4 Event...............................................................................................................56
8.3.1Event Settings........................................................................................ 56
8.3.2Motion Detection.................................................................................... 60
8.3.3Digital Input (DI)..................................................................................... 61
8.5 Notifications...................................................................................................62
8.4.1FTP Settings.......................................................................................... 62
8.4.2E-mail Settings....................................................................................... 63
8.4.3Samba Settings ..................................................................................... 64
8.4.4HTTP Settings........................................................................................ 65
8.4.5Digital Output (DO) ................................................................................ 66
8.4.6Video Clip .............................................................................................. 66
8.6 System............................................................................................................67
8.5.1System Log............................................................................................ 67
8.5.2Date and Time ....................................................................................... 69
8.5.3Device Information................................................................................. 70
8.5.4Storage Management (*)........................................................................ 71
8.7 Maintenance...................................................................................................73
8.6.1User Management................................................................................. 73
8.6.2Language............................................................................................... 74
8.6.3IP Filter .................................................................................................. 74
8.6.4Firmware Upgrade................................................................................. 75
8.6.5Configuration ......................................................................................... 75
8.6.6Reset to Default..................................................................................... 76
8.6.7Reboot................................................................................................... 76
1
Before You Use This Product
In many countries, there are laws prohibiting or restricting the use of surveillance
devices. This Video Server is a high-performance, web-ready Video Server which can be
part of a flexible surveillance system. It is the user’s responsibility to ensure that the
operation of this Video Server is legal before installing this unit for its intended use.
Upon opening the product’s package, verify that all the accessories listed on the
“Package Contents” are included. Before installing the Video Server, read the warnings
in the “Quick Installation Guide” to avoid misuse. When installing the Video Server,
carefully read and follow the instructions in the “Installation” chapters to avoid damages
due to faulty assembly or installation.
NOTE - This user manual refers to a CCTV camera which is connected to a VS-01A
as a network camera.
2
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are
country dependent and are firmware programmed at the factory to match the
intended destination. The firmware setting is not accessible by the end user.
3
Chapter 1 - Package Contents
Please check to make sure the product package contains all the accessories listed
below.
a. Video Server (VS-01A)
b. Screw Bag
c. Product CD
d. Video Server Plate
e. Warranty Card
f. Easy Installation Guide
g. Detachable Antenna (Optional)
h. Power Adapter (Optional)
4
Chapter 2 - Video Server Overview
The Brickcom VS-01A series is a high performance video server which helps users
makes an easy transition from an analog to IP-based surveillance system. It offers a
single channel solution which integrates any analog camera into the IP system.
Equipped with outstanding video processing capabilities, the VS-01A brings the high
video quality of IP cameras to any analog system.
The VS-01A is able to automatically scan analog signals (NTSC/PAL) and adapt to the
optimum operation mode to offer the best video conversion. By offering
H.264/M-JPEG/MPEG-4 triple codec compression, it is able to offer a flexible system
which does not require high bandwidth and storage capabilities. Through these
features, the VS-01A is able to simultaneously deliver dual configurable video streams
at 30fps at D1 resolution.
The wireless model of the VS-01A transforms any analog camera into one that is not
restricted by location or landforms. By adopting the technology of IEEE 802.11
a/b/g/n, the camera only needs to be set in an area with wireless coverage to transmit
the video feed. The WPS button on the WVS-01A allows for easy configuration and
troubleshooting by simplifying the complicated camera to AP/Router connection.
Users do not have to worry about the data connection failing because each video
server is equipped with a SD/SDHC memory card slot for local storage.
Support for Power over Ethernet enables the video server, as well as the analog
camera, to use the same cable for power and data transmission, eliminating the need
to install an external power supply.
By adopting the technology of video enhancement (3D de-interface, 3D noise
reduction and WDR enhancement), the Brickcom VS-01A equips analog cameras with
the accessibility and high video quality of IP cameras while allowing the user the
flexibility to use their existing analog infrastructure.
5
6
Chapter 3 - Device Appearance Description
< Front Panel >
< Rear Panel >
NOTE
1. The WPS button must first be enabled through the web GUI in order to work. See
page 53 for details on how to enable the WPS Button.
2. (*) These are optional features. Please refer to the Product List for the full list of
optional features available for the product.
Video Output
WPS LED (*)
Status LED
Built-in Microphone
Video Input
Power Connector
(DC12V in)
SD/SDHC
Card Slot (*)
Microphone/Line In
Audio Out
Extension I/O
Terminal Block
Reset Button
Detachable Antenna (*)
WPS Button (*)
Ethernet RJ45 10/100 Socket
(Link/Power LED embedded)
Power Connector
(AC24V in) (*)
7
Chapter 4 - LED Behavior
Function
LED Behavior
Description
Remark
WPS
WPS in progress
WVS-01A
Front Right
(Blue)
WPS
WPS Connection Error
WVS-01A
Front Right
(Blue)
WPS
Session overlap detected
WVS-01A
Front Right
(Blue)
WPS
Steady on
WPS successfully
Connected
WVS-01A
Front Right
(Blue)
Status
Hardware failure
Front Left
(Green)
Status
Steady on
1. Restoring settings
2. Normal Operation
Front Left
(Green)
Status
Unit
1. Powered off
2. Power on until system
setup
The LED can
be configured
to be unlit
during normal
operation
(Green)
Status
While F/W upgrading
Front Left
(Green)
Link
Blinking
Network connection in
progress
Rear Left
(Orange)
Link
Unit
No connection
Rear Left
(Orange)
Power
Steady on
Normal Operation
Rear Right
(Green)
Power
Unlit
Power off
Rear Right
(Green)
8
< Extension I/O Terminal Block >
The VS-01A provides an extension I/O terminal block which is used to connect the
camera with external input/output devices. The pin definitions are listed as below.
Pin
Function
1
Power + 4.5V
2
Digital Output
3
Digital Input
4
Ground
5
RS-485 -
6
RS-485 +
< DI/DO Diagram >
9
< Hardware Reset >
The Reset Button can be used to reboot the VS-01A or restore it to the default factory
settings. If the video server experiences a problem, rebooting it may correct the problem.
If the problem remains, please restore the VS-01A to the default factory settings and
reinstall the software.
To Reboot
Press and hold the Reset Button for one second using a paper clip or thin object. Wait
for the video server to reboot.
To Restore
Press and hold the Reset Button for ten seconds until the LED light turns off. When
successful restored, the LED will be blue during normal operation.
NOTE - By restoring the VS-01A, all settings will be restored to the default
factory settings.
SD Card Capacity (*)
The VS-01A is compatible with SD/SDHC (Maximum 32GB) cards.
(*) These are optional features. Please refer to the Product List for the full list of
optional features that are available for this product.
Reset Button
10
Chapter 5 - Installation
5.1 Video Server Connection
A. Basic Connection (Without PoE)
a. Connect the CCTV camera to the video input connector of the video
server using a BNC Connector.
b. Connect the supplied power cable to the video server and plug it into a
power outlet.
c. Connect the video server to a switch using an Ethernet cable. The
Ethernet cable should meet the specs of UTP Category 5 and not
exceed 100 meters in length.
d. To attach external devices, such as sensors and alarms, connect them
to the extension I/O terminal block.
11
B. Power over Ethernet (PoE) Connection
The VS-01A is PoE compliant, so there are two options for connecting the
video server and CCTV camera to a power and Ethernet source. The
video server can either be connected to a PoE-enabled switch or a
non-PoE switch.
a. If using a PoE-enabled switch:
i. Connect the CCTV camera to the Video input connector of the video
server using a BNC Connector.
ii. Use a single Ethernet cable to connect the camera to the
PoE-enabled switch. The Ethernet cable should meet the specs of
UTP Category 5 and not exceed 100 meters in length.
12
b. If using a non-PoE switch:
i. Connect CCTV camera to the video input connector of the video
server.
ii. Use a standard RJ-45 cable to connect the video server to a PoE
Injector.
iii. Use a standard RJ-45 cable to connect the PoE Injector to the
non-PoE switch.
iv. Use a standard power cable to connect the PoE Injector to a power
outlet.
13
5.2 System Requirements
Operating System:
Microsoft Windows XP Home Edition SP2
Microsoft Windows XP Professional SP2
Computer:
IBM PC/AT Compatible
CPU:
Pentium 3GHz or faster
Memory:
1024 MB or more
Monitor:
1024 x 768 pixels or more, 24-bit True color or better
Network Interface:
10/100Mbps Network interface card must be installed
Web Browser:
Microsoft Internet Explorer 6.0 SP2 or higher
Adobe Reader:
Adobe Reader 8.0 or higher
Audio:
The audio function will not work if a sound card is not installed in the PC.Audio
may be interrupted depending on network traffic.
14
5.3 Software Installation
In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the video server and grant
user access to the camera.
After checking the hardware connection, run the Installation Wizard program
included on the product’s CDROM to automatically search the intranet for the
camera. There may be many cameras on the local network. Differentiate the
cameras using the serial number which is printed on the labels on the carton and the
bottom of the video server.
A. Insert the Installation CD into the CD-ROM driver. Run Auto-Run Tool
directly from the CD-ROM to start the installation. When installing the
Brickcom software kit for the first time, select a desired language for the
interface. The available languages are listed in the scroll box. Click
<Install> and follow the steps to install the EasyConfig wizard on the
desired computer.
15
B. In the Install Shield Wizard dialog box, click <Next> to continue.
C. Read the End-User License Agreement and check the option “I accept the
terms of the license agreement”. Click <Next> to continue.
16
D. Select either “Complete” setup or “Custom” setup to install the system.
a. If COMPLETE SETUP is selected:
i. All program features will be installed into the default directory.
Check the option “Complete” and then click <Next>.
ii. Click <Change> to change the appointed folder where installation
and program files will be stored. Click <Next> to continue.
Table of contents
Other Brickcom Server manuals
