Brickcom WCB-100Ap User manual

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
Quick Installation Guide
for WCB-100Ap
May 17, 2011

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
•Brickcom WCB-100Ap
–Username/Password: admin/admin
•Brickcom DWRT-600N Wi-Fi Simultaneous Dual-Band Router
–Default IP address: 192.168.1.1
•Wi-Fi Antenna
•Brickcom Software Kit
–Download page: http://www.brickcom.com.tw/support/download.php
•Computer
–Intel Core 2 Duo@2GHz or above
–RAM 1GB or above
–Preferably with an nVIDIA/ATI stand-alone VGA card.
•Ethernet Cable
Things to Have Before You Start

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
Lens & Focus
Micro SD Card Slot
Wi-Fi WPS Button
Privacy Button
Power LED
White Light LED
PIR Sensor
Microphone
Speaker
Network Link LED
Internet LED
WPS LED
Privacy Mask LED
WCB-100Ap Camera Hardware

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
Ethernet Port
DC Power In (12V 1A)
Stand
Reset Button
WCB-100Ap Camera Hardware

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
•Wi-Fi Simultaneous Dual-Band Router: DWRT-600N
DC Power In
(12V 1.5A)
Reset Button
LAN Ethernet Ports
WAN Ethernet Port
USB Port
WPS Button
LED Indicators
DWRT-600N Hardware

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
Set Up Wi-Fi Connection
•If the WCB-100Ap and DWRT-
600N are running with the factory default setting,
the WCB-100Ap can be connected to the DWRT-600N automatically in around
90 seconds after power-on.
–The network name (SSID) of the DWRT-600N is Brickcom.
–The wireless connection is not encrypted and is not secure.
–To reset the DWRT-600N to the factory default, press the Reset button for 10
seconds and all the LED indicators will go off, then release it. This process takes
around 60 seconds.
–To reset the WCB-100Ap to the factory default, press the Reset button for 10
seconds and then release it. This process takes around 90 seconds.

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
Set Up Wi-Fi Connection Using WPS
•Step 1: Power on the DWRT-600N and the WCB-100Ap. Wait for 1 minute for both
devices to be up and running.
•Step 2: Press the WPS button of the DWRT-600N. The WPS LED will be blinking.
•Step 3: Press the WPS button of the WCB-100Ap. The WPS LED will be blinking.
•Step 4: When the WPS LED of the WCB-100Ap stops blinking and becomes ON, WPS
is successfully done (the WPS LED will go off some time later). The process usually
takes less than 1 minute. The WPS Camera LED of the DWRT-600N becomes ON.
•Step 5: If you have more than 1 camera, repeat step 2~4.
•The wireless connection is encrypted and secure.
Blinking: WPS is running
OFF: WPS is not running
ON: Brickcom IP camera is found
WPS LED

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
Brickcom Software Kit
•Includes EasyConfig, PC-NVR, User Manual, Quick Guide, etc.
•Language Support: English, Spanish, French, Deutsche, Japanese, Chinese, etc.
•Comes in a CD with the Brickcom IP camera. The CD supports Auto Run.
•Click Install to install the Brickcom Software Kit to your PC.

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
•Use EasyConfig to discover and access the Brickcom IP camera.
–Simple Mode allows the user to find the camera, connect to it and do the
live view in just a few mouse clicks!
–Professional Mode gives the user more control over the camera, such as
•Detailed network configuration of the camera
•EasyLink setting
•Access to PC-NVR
EasyConfig

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
PC-NVR (BRC-64)
•Brickcom’s free-bundled 64-channel recording software. No license fee.
•Included in the Brickcom Software Kit. The user manual is also included.
•Supports Windows XP, Vista and 7.
•Supports simultaneous live view, recording and playback.

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
Choose the camera
and click Next
Start Next Next Next
Choose Simple Mode
and click Next
EasyConfig Workflow
Choose
Live View
Username: admin
Password: admin
First-Time
ActiveX Player
Installation
Choose Back
to set up more
cameras
Attention: Please connect your PC to
the DWRT-600N’s LAN Ethernet port
before running EasyConfig.

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
Notes
•If the image is blurry, please adjust the focus of the WCB-100Ap.
•The wireless distance between the DWRT-600N and WCB-100Ap is typically
60~90ft indoors, and up to 200ft in the line-of-sight situation. The actual
distance varies with the environment.
•Please close all other Windows applications for the PC to have more system
resources for viewing the video feed.

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
Brickcom, Your Best Partner.
Thank You
© Brickcom Technology Inc., All Rights Reserved. This document is for planning
purposes only, and is not intended to modify or supplement any specifications
or warranties relating to products of Brickcom Technology. Brickcom may make
changes to specifications and descriptions at any time, without notice.