Brickhouse Security Speed 4 User manual

QUICK GUIDE
ORIGINALITY DESIGN SMART - AND BEAUTIFUL
4

Adhesive tape
USB cable Bracket
Power adapter
Speed 4
I/M
Screws
1
What's in the box
Consult the checklist below for all components.
Pin

Status light
Microphone
Speaker
Power
Reset
SD card slot
2
Description
Power
Status light
Microphone
SD card slot
Reset
DC5V±10%
Red light solid on: the camera network is abnormal
Red light blinked: awaiting WiFi connection, or currently
connecting (faster blinking)
Blue light solid on: camera running correctly
Blue light blinked: awaiting manual WiFi configuration, or
currently connecting (faster blinking)
Captures sound for your video
Supports local SD Card storage (Max.128G)
Press and hold for 5 seconds with pin to reset the camera (if
you have modified settings, they will return to factory defaults)
Pressing for 1 second will activate manual WiFi setup mode
RESET
SD

apply to the circle
Peel off the sticker
3
1 Use the included mounting bracket to fix the camera to a clean surface.
2 Or, stick the camera to an inclined surface with the adhesive tape we provided.
安装
Install

4
Download
CloudEdge is available for both iOS and Android OS. Search the name
'CloudEdge'in App Store or Android Market, or scan upper QR-Code to
download the App.
Set up router
This product only supports 2.4GHz frequency band router, does not support
5GHz frequency band router, please set the relevant parameters of the router
before WiFi configuration, WiFi passwords do not include special characters
such as ~!@#$%^&*(). When the device is configured in WiFi, the mobile phone
and device are as close as to the router, which can speed up the configuration
of the device.
Connect
ipad AndroidIOS
·Support
Dowoload App(IOS&android)
Please keep network available

5
Registration process
Step 1 Open the CloudEdge App, click 'SIGN UP', input a valid email address
and select 'registration means agreement with user agreement privacy
agreement' then click 'NEXT'.
Step 2 Enter the email address and click 'OK', create a nickname and login
password.
Note: Make sure your router, device, and mobile phone are nearby.

6
QR Code Configuration
Few notices before adding the device
1. This device only supports 2.4GHz WiFi router, please make sure you
are using a 2.4GHz WiFi router.
2. Please follow the instructions and make sure the password is inputed
correctly.
3. One device can only be added with one App account, if the device has
been added with another account already, then it can’t be added to
any another account again.
Process
Step 1 Open the CloudEdge App, click '+', and select the type of device
to add.
Step 2 Please confirm the red LED light blinks, select 'The device has
flashed red slowly or you hear a tone', click 'Next'. Then input
the wireless password, click 'Next'.

7
Step 3 The device is scanning the QR code at a distance of 15~25cm (you can
click the 'operation' to view the scanning mode). After the device scans
successfully, click 'Hear tone'.

8
Step 4 The device is successfully connected to the network. After the configuration
is completed, the App automatically adds the successfully scanned device,
and return to the device list. The configuration is completed.
Step 5 Click the play button to complete the preview. (Remind: long press the
image to be previewed to remove the device, add device again to reset
the device)

Daytime Night
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send
you push notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful
night-vision technology.
Functions
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you
with 360 degrees of vision.
9

10
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera,
but cannot change the configuration on the App, remove the camera,
and must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the
device again by the App.
Q: Why doesn't the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF
card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened;Message notification and
authority confirmation in the mobile phone system have been opened.
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close
to the router, and if not, it is recommended to reset the device and add
it again.
FAQ