Brodit 942750 Operator's manual

22 June, 2021, www.brodit.com, © 2021 Brodit AB
Product 942750
942750 Charging Cable
For use in the vehicle’s cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a
passive holder.
EAN: 7320289427507
Item no 942750 fits:
Motorola ET1 (For all countries)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read the instructions and look at the pictures before using the product.
1. Connecting the charging cable: Hold the device above the cable. Lean the top of the device towards you. Place
the device's connector straight above the charging cable's connector.
2. Press the device towards the charging cable, at the same time press the top of the device away from you so
the steering pins on each side of the connector hooks into the holes in the bottom of the device. Press downward,
making sure the device is connected properly to the charging cable. You need to press firmly in an arc motion on
order for the device to connect to the charging cable.
3. Removing the charging cable: Take a firm grip on the back of the charging cable with your fingers.
4. Press the top part of the device toward you. When the steering pins on each side of the connectos releases
from the holes in the bottom of the device, lift the device up and away from the charging cable. You need to press
firmly in an arc motion at the same time as you lift the device in order to remove the charging cable.