Brodit 216004 User manual

17 May, 2021, www.brodit.com, © 2021 Brodit AB
Product 216004
216004 Mount With MultiMoveClip.
This mount offers an easy and secure way to mount your printer. With quick release MultiMoveClip, it makes it
easy to move your printer between locations. Combining functionality and convenience, Brodit products
contribute to an improved working environment. Custom made mount with a perfect, firm fit. Attach onto a
Pedestal Mount or a high strength ProClip mounting platform.
With AMPS-holes. Made of high grade ABS plastic. Color: black. Made in Sweden.
EAN: 7320282160043
Item no 216004 fits:
Zebra QLN 420 (For all countries)
Zebra ZQ630 (For all countries)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the product.
1. Place the mount onto the device so the holes match. Screw the two enclosed SHORT screws in place in the
holes shown in the picture.
Screw the two enclosed LONG screws in place in the holes as shown in the picture.
2. Place the MoveClip into desired position and attach it with the enclosed screws.
3. Put the device into place: Hold the device over the MoveClip. Press it downwards onto the MultiMoveClip so it
snaps into place.
Remove the device: Press forward on the release lever and slide the device upwards away from the
MultiMoveClip.
4. The product is in place.