brondell SouthSpa Revive LH-22 User manual

OWNER'S MANUAL
LH-22 Bidet Attachment
Dual-Temperature / Dual-Nozzles

Attach Proof of Purchase to This Page
Adjunte prueba de compra a esta página
Joindre une preuve d’achat à cette page

1
CONTENTS
PRODUCT INFORMATION
Product Features .................... Page 2
Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Product Dimensions.................. Page 4
PRODUCT INSTALLATION
Before Installation ................... Page 5
Connecting the Cold Water Supply..... Page 6
Connecting the Hot Water Supply...... Page 8
Installing the Bidet Attachment ........ Page 10
PRODUCT OPERATION
Using the SouthSpa.................. Page 12
Nozzle Positioning ................... Page 12
MAINTENANCE
Cleaning the SouthSpa ............... Page 13
Short Term Non-Use ................. Page 13
WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . Page 14
CONTACT .......................... Page 15
SPANISH VERSION .................. Page 16
FRENCH VERSION .................. Page 31

2
PRODUCT INFORMATION
• High-quality ABS material with full body panel
• Hygienic dual retractable nozzles
• Self-cleaning nozzle feature
• Adjustable temperature for ambient and warm water washes
• Positionable nozzles
• Adjustable water pressure
• Ceramic core internal valve with patented uni-body construction
for safety
• High-quality metal 7/8” and 3/8" T-valves
• Durable braided metal cold water hose
• High-temperature, durable hot water flex tubing
• No electricity or batteries required
• Easy installation and adjustable toilet fit
• All accessories included for standard installation
• One-year warranty
PRODUCT FEATURES

3
Bidet attachment with turn-dial control and adjustable brackets
PARTS LIST
25” braided metal
bidet hose
Cold water 7/8"
T-valve Connector
Hot water T-alve with
1/4" Pressure Connector
& Pressure Cap
(3/8" x 3/8")
Large rubber washer (2)
Small rubber washer (2)
Hot water supply cap
1/4" Hot water flex tubing
Hot water flex tubing
pressure connector
with pressure cap

4
PRODUCT DIMENSIONS
PRODUCT INFORMATION (cont.)
1.6" at deepest point
on control panel
0.4" at deepest
point on body
6.5"
10.6"
3.7"
2.7" 5.5"
17.3"
8.7"
3.5"

5
Check the size of the hot water supply connection (most likely under the sink/wash
basin). This needs to be a 3/8” connection for our T-valve to install.
Note: if the connection is a 1/2” connection, you will need to purchase the following
reducing adapter available online and at many plumbing hardware stores: Reducing
Adapter, 1/2” Female NPT x 3/8” Male Compression.
IMPORTANT
Please be advised that the provided
T-Valve should be installed at the Fill
Valve under the toilet tank, and NOT
at the cold water supply coming from
the wall.
If you do not have access to the Fill
Valve under the toilet tank, contact
Brondell Customer Service at
888.542.3355. We may be able to
guide you through the process.
PRODUCT INSTALLATION
BEFORE INSTALLATION
Check Water Supply Line
Check the water supply line that connects the toilet tank fill valve to the water
shuto valve at the wall. If it is a rigid pipe, you will need to purchase a flexible
water supply hose to replace it before installing the SouthSpa. The length of the
hose may vary, and the top connection size should be 7/8” Ballcock to connect to
the T-valve that you will install under the toilet tank, and the bottom connection will
vary (most common are 3/8” and 1/2” female compression).

6
PRODUCT INSTALLATION cont.)
CONNECTING THE COLD WATER SUPPLY
3. Connect 7/8” T-Valve to Water Supply Line and
Fill Valve Under Toilet Tank.
a. Install the 7/8” T-valve with one or both of
the rubber washers to the incoming water
connection on the bottom of your toilet tank.
b. Connect the cold water supply line coming
from the wall to the bottom of the T-valve.
Step 3a
Step 3b
1. Remove existing toilet seat
a. Lift hinge covers and use flathead or Phillips
head screwdriver to remove the mounting
bolts. Alternatively, you may need to loosen
mounting bolts underneath the seat.
b. Remove the toilet seat and set the seat,
mounting bolts and hardware aside.
Step 1b
Step 2c
2. Turn o water supply valve and flush toilet
a. Turn o water supply at the wall to stop flow of
water.
b. Flush toilet and hold down handle to
completely empty toilet tank.
c. Disconnect water supply hose from the fill
valve under the toilet tank.

7
IMPORTANT
If you are only connecting the cold water supply,
you must install the Hot Water Supply Cap
(provided - see Page 3) over the hot water
connection on your SouthSpa (see diagram).
Failure to connect or cap the hot water supply will
result in leaking during use.
After installing hot water cap, proceed to "Installing
the Bidet Attachment" on Page 10.
If you wish to also connect your hot water supply,
then proceed to "Connecting the Hot Water Supply"
on Page 8.
CONNECTING THE COLD WATER SUPPLY (cont.)
4. Connect Bidet Hose to T-Valve
a. Connect one end of the braided metal bidet
hose to the remaining open side of the
installed T-valve.
Step 4a

8
1. Connect the hot water supply
a. Locate the hot water supply line in your
bathroom under your sink/washbasin and turn
the water supply valve all the way o.
b. Drain the hot water line by turning on the sink
tap on the hot setting until no more water
comes out.
c. Disconnect hot water supply hose to sink from
shut o valve. You may have to use a 3/8”
compatible wrench or a similar tool
(not supplied).
Note: there may be some residual water in the
hose, use a small container or towel to catch
any residual water.
2. Install the Hot Water 3/8" T-valve and the small
rubber washers as needed onto the hot water
shut o valve under the sink.
3. Reconnect hot water supply line to open end
(top) of T-valve.
Step 1c
Steps 2 and 3
CONNECTING THE HOT WATER SUPPLY
PRODUCT INSTALLATION cont.)