Brookstone Global Power Converter User manual

Global Power
Converter
World Travel Adapter
25-1875 Watt
GLOBAL POWER CONVERTER
The converter enables the traveler to
use 110 volt electronic items and
appliances, including hair dryers,
heating pads,CD players, etc. in
countries that have 220/240 AC
power. One of three types of popular
AC power plugs are selectable for
use through the socket: UK,
EUROPE and AUST/CHINA.
SELECT PROPER WATT
SETTING
Check appliance’s rating plate for
watts. If wattage is not indicated
simply multiply voltage by amps; i.e.
120V x 3 amps = 360 watts.
Then set "LOW" or "HIGH" slide-knob
(on the product Right side) to the
appropriate setting.
PRODUCT DETAILS
1. AC Plug type: US/AU/EU/UK
2. Power INPUT rating: 220/240 Vac,
50Hz
3. Power OUTPUT rating: 110/120
Vac, 1875W Max.
4. Wattage Selector 25W/1875W
Manual Switch
5. Power indicator: Blue LED
6. Dimension: 4.5" x 2.1" x 1.89"
7. Weight: 11 Oz
Note:
All appliances have a wattage rating
marked on them and should be check
before using. If you are unsure if your
appliance contains electronic
components, please contact the
appliance manufacturer.
Warning:
• DO NOT USE the “HIGH” setting for
electronic circuitry devices.
• DO NOT USE the converter with
power strip.
• DO NOT LEAVE the converter in wall
outlet.
• Use the high-wattage mode only for
short periods (approx. 10min).
FOR A EUROPEAN STANDARD
PLUG Europe/Middle-East/Africa
1. Push the slider-knob (on the left
side) to “EUROPE".
2. Flip the “EUROPE” adapter plug
upwards.
3. The blue light stays on while the
adapter plug working.
FOR A BRITISH STANDARD
PLUG UK/Singapore/Hong Kong
1. Push the slider-knob (on the left
side) to “UK".
2. Push out the "UK" adapter plug and
flip the “GROUND PIN” upwards.
3. The blue light stays on while the
adapter plug working.

858280
Merrimack, New Hampshire, USA 03054
800-846-3000 • Brookstone.com
FOR A US/AUSTRALIA/CHINA
STANDARD PLUG Australia/China/
New Zealand/USA/Canada/Japan/Taiwan/
Caribbean
1. Push the slider-knob (on the left
side) to “AUST/CHINA".
2. Push out the "AUST/CHINA"
adapter plug. Then incline the
prongs or leave them straight
(according to country) before
plugging into a socket.
3. The blue light stays on while the
adapter plug working.
*After use, remove the CONVERTER
out from wall outlet and pull all plug
prongs back into the socket.