Brother 882-W70 Installation and operating instructions

Operation Manual Addendum
The screens in this manual are for illustration purposes only and may differ depending on the model.

1.5-1
Embroidery
■Thread Tension Setting
If the thread tension is changed from the default setting, the new
setting will remain after turning the machine off and on. This new
setting will apply to any selected design.
Other Functions
■Resetting machine
If necessary, all saved data, customized setting and network
information in the machine can be erased. When lending or
transferring the machine to another person, or disposing the
machine, please be sure to use "Reset to Default" menu to reset to
their defaults to delete all the setting information and prevent third
parties from accessing it.
■Artspira App Compatible
Functions have been added for the Artspira App. With these
functions, you can transfer content published on the app to the
embroidery machine and enjoy creating original works using the
functions on the app.
For more information about the app, refer to the official website. For
details on how to operate the embroidery machine using the app,
see the Artspira App Quick Guide on Artspira support page (https://
s.brother/csyai/).
Features Added with Update Ver.1.50

1.5-2
■ScanNCut (My Connection)
* Limited to certain sales region.
“ScanNCut (My Connection)” has been added to the settings screen.
After activating “ScanNCut (My Connection)”, you will be able to
use functions that can be combined with functions on the Brother
cutting machine (compatible models only).
●Send a built-in pattern from the cutting machine to the
embroidery machine and edit the pattern in My Design Center
for embroidering.
●Send an embroidery pattern from the embroidery machine to the
cutting machine for cutting/ drawing.
●Apply appliqué settings to part of an embroidery pattern on the
embroidery machine, then create an appliqué.
For details on compatible machines, check the Brother support
website (http://s.brother/cnxaa/).
For details on activating “ScanNCut (My Connection)” and the
combined functions, visit the following webpage and refer to the
“My Connection (for Innov-is BP/XE/XJ series)” Operation Manual.
(https://s.brother/cmead/) or (https://s.brother/cmeaf/)
English
882-W70/W80/W82
Version 0