Brother Innov-is NX-650 User manual

Computerized Sewing Machine
Operation
Manual
GETTING READY
SEWING BASICS
UTILITY STITCHES
APPENDIX
Read when additional
information is required.
Read before use.
Operation Manual
PANTONE 285 Black New_F3dash_En_cover
English
885-U24
XE0371-1011
Printed in China

1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
IMPORTANT SAFETY INSTRUCTIONS
Please read these safety instructions before attempting to use the machine.
DANGER - To reduce the risk of electric shock:
1Always unplug the machine from the electrical outlet immediately after using, when cleaning,
when making any user servicing adjustments mentioned in this manual, or if you are leaving the
machine unattended.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons.
2Always unplug the machine from the electrical outlet when removing covers, lubricating, or
when making any adjustments mentioned in the instruction manual:
• To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp
the plug and pull it out of the electrical outlet. Do not pull on the cord.
• Plug the machine directly into the electrical outlet. Do not use an extension cord.
•Always unplug your machine if the power is cut.
3 Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or water is spilled on the unit. Return the machine to the nearest
authorized dealer or service center for examination, repair, electrical or mechanical adjustment.
While the machine is stored or in use if you notice anything unusual, such an odor, heat,
discoloration or deformation, stop using the machine and immediately unplug the power cord.
4 Always keep your work area clear:
• Never operate the machine with any air openings blocked. Keep ventilation openings of the
sewing machine and foot control free from the build up of lint, dust, and loose cloth.
•Do not store objects on the foot controller.
•Do not use extension cords. Plug the machine directly into the electrical outlet.
•Never drop or insert any object into any opening.
•Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
•Do not use the machine near a heat source, such as a stove or iron; otherwise, the machine,
power cord or garment being sewn may ignite, resulting in fire or an electric shock.

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
2
5 Special care is required when sewing:
•Always pay close attention to the needle. Do not use bent or damaged needles.
• Keep fingers away from all moving parts. Special care is required around the machine needle.
• Switch the sewing machine to the symbol “O” position to turn it off when making any adjustments
in the needle area.
•Do not use a damaged or incorrect needle plate, as it could cause the needle to break.
•Do not push or pull the fabric when sewing, and follow careful instruction when freehand stitching
so that you do not deflect the needle and cause it to break.
6This machine is not a toy:
• Your close attention is necessary when the machine is used by or near children.
• Do not use outdoors.
7 For a longer service life:
• When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store
the machine near a space heater, iron, halogen lamp, or other hot objects.
• Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders
can damage the case and machine, and should never be used.
• Always consult the operation manual when replacing or installing any assemblies, the presser feet,
needle, or other parts to assure correct installation.
8 For repair or adjustment:
• If the Light unit (light-emitting diode) is damaged, it must be replaced by authorized dealer.
• In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table
in the back of the operation manual to inspect and adjust the machine yourself. If the problem
persists, please consult your local authorized Brother dealer.
Use this machine only for its intended use as described in this manual.
Use accessories recommended by the manufacturer as contained in this manual.
The contents of this manual and specifications of this product are subject to change without notice.
For additional product information, visit our web site at www.brother.com
SAVE THESE INSTRUCTIONS
This machine is intended for household use.

3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
FOR USERS IN THE UK, EIRE, MALTA AND
CYPRUS ONLY
IMPORTANT
• In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the
mark, rating as marked on plug.
• Always replace the fuse cover. Never use plugs with the fuse cover omitted.
• If the available electrical outlet is not suitable for the plug supplied with this equipment, you
should contact your authorized dealer to obtain the correct lead.
FOR USERS IN AC INPUT 220-240V
COUNTRIES AND MEXICO
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
4
Contents
IMPORTANT SAFETY INSTRUCTIONS ...............................................................................1
Introduction ........................................................................................................................7
Sewing Machine Features ....................................................................................................7
Accessories..........................................................................................................................8
Included accessories .........................................................................................................................................8
Optional accessories ......................................................................................................................................... 9
Names of Machine Parts and Their Functions ...................................................................10
Front view.......................................................................................................................................................10
Needle and presser foot section .....................................................................................................................11
Right-side/rear view ........................................................................................................................................11
Operation buttons ...........................................................................................................................................12
Operation panel..............................................................................................................................................13
GETTING READY 15
Turning the Machine On/Off.............................................................................................16
Power supply precautions ...............................................................................................................................16
Turning on the machine .................................................................................................................................. 17
Turning off the machine ..................................................................................................................................17
Understanding the LCD Screens........................................................................................18
Changing the Machine Settings .........................................................................................19
Changing the settings ......................................................................................................................................19
Adjusting the brightness of the LCD ...............................................................................................................21
Changing the screen language.........................................................................................................................21
Winding/Installing the Bobbin...........................................................................................22
Bobbin precautions .........................................................................................................................................22
Winding the bobbin ........................................................................................................................................22
Installing the bobbin .......................................................................................................................................26
Upper Threading ...............................................................................................................28
Threading the upper thread .............................................................................................................................28
Threading the needle ...................................................................................................................................... 31
Threading the needle manually (without using the needle threader) ............................................................... 33
Using the twin needle .....................................................................................................................................33
Pulling up the bobbin thread...........................................................................................................................36
Replacing the Needle ........................................................................................................37
Needle precautions .........................................................................................................................................37
Needle types and their uses............................................................................................................................. 38
Checking the needle ....................................................................................................................................... 39
Replacing the needle.......................................................................................................................................39
Replacing the Presser Foot ................................................................................................41
Presser foot precautions ..................................................................................................................................41
Replacing the presser foot ...............................................................................................................................41
Adjusting the pressure of the presser foot ....................................................................................................... 43
Removing the presser foot holder ................................................................................................................... 43
Using the walking foot .................................................................................................................................... 44
Sewing Cylindrical or Large Pieces....................................................................................46
Stitching cylindrical pieces.............................................................................................................................. 46
Sewing large pieces of fabric...........................................................................................................................46

5
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
SEWING BASICS 49
Sewing...............................................................................................................................50
General sewing procedure ..............................................................................................................................50
Positioning the fabric ......................................................................................................................................51
Starting to sew.................................................................................................................................................52
Securing the stitching ......................................................................................................................................54
Cutting the thread ...........................................................................................................................................55
Adjusting the Thread Tension ............................................................................................57
Thread tension ................................................................................................................................................57
Changing the tension of the upper thread ....................................................................................................... 58
Adjusting the Stitch Width and Length ..............................................................................59
Adjusting the stitch width................................................................................................................................ 59
Adjusting the stitch length ............................................................................................................................... 60
Useful Functions................................................................................................................61
Changing the needle stop position .................................................................................................................61
Automatically sewing reverse/reinforcement stitches ......................................................................................61
Automatically cutting the thread ....................................................................................................................63
Saving stitch settings .......................................................................................................................................64
Hands-free raising and lowering of the presser foot ........................................................................................65
Useful Sewing Tips ............................................................................................................66
Trial sewing ....................................................................................................................................................66
Changing the sewing direction ........................................................................................................................66
Sewing curves .................................................................................................................................................66
Sewing thick fabrics ........................................................................................................................................67
Sewing thin fabrics..........................................................................................................................................67
Sewing stretch fabrics......................................................................................................................................67
Sewing leathers or vinyl fabrics ......................................................................................................................68
Sewing an even seam allowance .................................................................................................................... 68
UTILITY STITCHES 69
Selecting Stitching .............................................................................................................70
Selecting stitch types and patterns ..................................................................................................................70
Selecting stitching ...........................................................................................................................................72
Overcasting Stitches..........................................................................................................76
Sewing overcasting stitches using overcasting foot “G” ...................................................................................76
Sewing overcasting stitches using zigzag foot “J”............................................................................................. 77
Sewing overcasting stitches using the side cutter ............................................................................................. 78
Basic Stitching ...................................................................................................................80
Basting ............................................................................................................................................................80
Basic stitching .................................................................................................................................................81
Blind Hem Stitching ..........................................................................................................82
Buttonhole Stitching/Button Sewing..................................................................................84
Buttonhole sewing ..........................................................................................................................................85
Button sewing .................................................................................................................................................89
Zipper Insertion.................................................................................................................91
Inserting a centered zipper ..............................................................................................................................91
Inserting a side zipper .....................................................................................................................................93
Zipper/piping Insertion .....................................................................................................96
Inserting a centered zipper ..............................................................................................................................96
Inserting a piping ............................................................................................................................................97
Sewing Stretch Fabrics and Elastic Tape ............................................................................98
Stretch stitching...............................................................................................................................................98
Elastic attaching ..............................................................................................................................................98

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
6
Appliqué, Patchwork and Quilt Stitching ........................................................................100
Appliqué stitching .........................................................................................................................................101
Patchwork (crazy quilt) stitching .................................................................................................................. 102
Piecing..........................................................................................................................................................102
Quilting ........................................................................................................................................................104
Free-motion quilting......................................................................................................................................105
Satin stitching using the sewing speed controller ..........................................................................................106
Reinforcement Stitching ..................................................................................................108
Triple stretch stitching ...................................................................................................................................108
Bar tack stitching...........................................................................................................................................108
Darning......................................................................................................................................................... 110
Eyelet Stitching................................................................................................................112
Horizontal Stitching ........................................................................................................113
Decorative Stitching........................................................................................................115
Fagoting ........................................................................................................................................................116
Scallop stitching............................................................................................................................................117
Smocking ...................................................................................................................................................... 117
Shell tuck stitching ........................................................................................................................................118
Joining ..........................................................................................................................................................119
Heirloom stitching ........................................................................................................................................119
Sewing the Various Built-In Decorative Patterns.............................................................122
Sewing beautiful patterns ..............................................................................................................................122
Sewing patterns.............................................................................................................................................122
Combining patterns.......................................................................................................................................123
Repeat sewing patterns.................................................................................................................................. 124
Checking the selected pattern .......................................................................................................................124
Changing the pattern size..............................................................................................................................125
Changing the stitch density ........................................................................................................................... 126
Changing the pattern length ..........................................................................................................................127
Shifting patterns ............................................................................................................................................128
Mirror imaging the pattern ............................................................................................................................ 129
Saving patterns..............................................................................................................................................130
Retrieving a pattern .......................................................................................................................................130
Realigning the pattern ...................................................................................................................................131
Designing a Pattern .........................................................................................................133
Drawing a sketch of the pattern ....................................................................................................................133
Entering the pattern data ............................................................................................................................... 134
Examples of designs ......................................................................................................................................136
APPENDIX 137
Stitch Settings..................................................................................................................138
Utility stitches ...............................................................................................................................................138
Other stitches................................................................................................................................................144
Care and Maintenance ....................................................................................................149
Cleaning the machine surface .......................................................................................................................149
Cleaning the race ..........................................................................................................................................149
Troubleshooting ..............................................................................................................151
Error messages ..............................................................................................................................................155
Nothing appears in the LCD.......................................................................................................................... 156
Operation beep.............................................................................................................................................156
Cancelling the operation beep ......................................................................................................................156
Index ................................................................................................................................158

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Introduction 7
Introduction
Thank you for purchasing this sewing machine. Before using this sewing machine, carefully read the
“IMPORTANT SAFETY INSTRUCTIONS” (page 1), and then study this manual for the correct operation of
the various functions. In addition, after you have finished reading this manual, store it where it can quickly
be accessed for future reference.
Sewing Machine Features
aEasy upper threading
Since the spool can be installed at the front of the sewing machine, the upper thread can easily be threaded. In addition,
the needle can be threaded with a simple operation (page 28).
bFull auto upper thread tension
The thread tension is adjusted automatically.
cAutomatic thread-cutting
The sewing machine can be set to automatically cut the thread at the end of the stitching (page 63).
dOne-touch lower threading
You can start sewing without pulling up the bobbin thread (page 26).
eSimple bobbin-winding
The bobbin can quickly and easily be wound with thread (page 22).
fBuilt-in stitches
You can select from the built-in stitches available, including utility stitches, character stitches and decorative stitches.
gKnee lifter
Use the knee lifter to raise and lower the presser foot with your knee, leaving both hands free to handle the fabric (page
65).

8
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Accessories
After opening the box, check that the following accessories are included. If any item is missing or
damaged, contact your dealer.
Included accessories
The following items should also be included in the box.
■Attaching the stitch pattern plate
The stitch pattern plate shows the stitch numbers and the patterns available with each stitch mode. Attach
the stitch pattern plate to the handle as shown in the illustration below.
Note
(For U.S.A. only)
zFoot controller: Model N5V
This foot controller can be used on this machine model
NX-650/ NX-800.
zThe screw for the presser foot holder is available
through your authorized dealer.
(Part code: XA4813-051)
zThe organized accessory tray is available through your
authorized dealer.
(Part code: XC4489-051)

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Accessories 9
Optional accessories
The following are available as optional accessories.
1. Wide table
Part code: SA551, WT5(XC9567-122)
2. 1/4 inch quilting foot with guide
Part code: SA185, F057(XC7416-252)
Memo
zTo obtain optional accessories or parts, contact your sales representative or the nearest authorized
service center.
1. 2. 3. 4. 5. 6. 7. 8. 9.
10. 11. 12. 13. 14. 15. 16. 17. 18. 19.*
20. 21. 22. 23. 24. 25. 26. 27. 28. 29.
30. 31. 32. 33. 34. 35.
36. 37. 38. *75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
No. Part Name
Part Code
No. Part Name
Part Code
U.S.A./
Canada
Others
U.S.A./
Canada
Others
1 Buttonhole foot “A” XC2691-023 21 Cleaning brush X59476-021
2 Overcasting foot “G” XE6305-101 22 Eyelet punch XZ5051-001
3 Monogramming foot “N” XD0810-031 23 Screwdriver (large) XC8349-021
4 Zipper foot “I” X59370-021 24 Screwdriver (small) X55468-021
5
Zigzag foot “J” (on machine) XC3021-031 25 Spool cap (large) 130012-024
6 Blind stitch foot “R” XE2650-001 26 Spool cap (medium)(2) XE1372-001
7 Button fitting foot “M” XE2643-001 27 Spool cap (small) 130013-124
8 Walking foot SA140
F033N (XC2214-002) 28 Extra spool pin XC4654-051
9 Quilting foot SA129
F005N (XC1948-002) 29 Spool net XA5523-020
10 Stitch guide foot “P” SA160 F035 (XC1969-002) 30 Foot controller XD0496-121(EU area)
11
Adjustable zipper/piping foot SA161 F036N (XC1970-002) XC6651-221(other areas)
12 Non stick foot SA114
F007N (XC1949-002) 31 Grid sheet set SA527 GS4 (XC4549-020)
13 Open toe foot SA147
F027N (XC1964-002) 32 Knee lifter XA6941-052
14 1/4 inch quilting foot SA125
F001N (XC1944-052) 33 Operation manual XE0371-101
15 Side cutter SA177 F054 (XC3879-102) 34 Quick reference guide XE0360-001
16 Quilting guide SA132
F016N (XC2215-002) 35 Hard case XC9701-052
17 Seam ripper XZ5082-001 36 Accessory bag XC4487-021
18 Bobbin (4) SA156 SFB (XA5539-151) 37 Disc-shaped screwdriver XC1074-051
19 Needle set X58358-021 38 Stitch pattern plate XE0541-001
20 Twin needle X59296-121
1. 2.

10
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Names of Machine Parts and Their Functions
The names of the various parts of the sewing machine and their functions are described below. Before
using the sewing machine, carefully read these descriptions to learn the names of the machine parts.
Front view
aThread guide plate
Pass the thread under the thread guide plate.
bThread guide cover
Pass the thread behind the thread guide cover when
threading the upper thread.
cSpool pin
Place a spool of thread on the spool pin.
dBobbin winding thread guide and pretension disk
Pass the thread under this thread guide and around the
pretension disk when winding the bobbin thread.
eTop cover
Open the top cover to place the spool of thread on the
spool pin.
fBobbin winder
Use the bobbin winder when winding the bobbin.
gOperation panel
Use for stitch selection and various stitch functions.
(page 13)
hKnee lifter mounting slot
Insert the knee lifter into the knee lifter mounting slot.
iOperation buttons and sewing speed controller
Use these buttons and the slide to operate the sewing
machine. (page 12)
jFlat bed attachment with accessory compartment
Store presser feet and bobbins in the accessory
compartment of the flat bed attachment. When sewing
cylindrical pieces, remove the flat bed attachment.
kThread cutter
Pass the threads through the thread cutter to cut them.
lNeedle threader lever
Use the needle threader to thread the needle.
mThread take-up lever check window
Look through the window to check the position of the
take-up lever.
1
9
8
0
A
B
C
2
3
4
5
6
7

Names of Machine Parts and Their Functions 11
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Needle and presser foot
section
aButtonhole lever
The buttonhole lever is used with the one-step
buttonhole foot to create buttonholes.
bThread guide disk
Pass the thread through the thread guide disk when
using the needle threader to thread the needle.
cNeedle bar thread guide
Pass the upper thread through the needle bar thread
guide.
dNeedle plate
The needle plate is marked with guides to help sew
straight seams.
eNeedle plate cover
Remove the needle plate cover to clean the bobbin case
and race.
fBobbin cover
Open the bobbin cover to set the bobbin.
gFeed dogs
The feed dogs feed the fabric in the sewing direction.
hPresser foot
The presser foot applies pressure consistently on the
fabric as sewing takes place. Attach the appropriate
presser foot for the selected stitch.
iPresser foot holder
The presser foot is attached onto the presser foot holder.
Right-side/rear view
aPresser foot dial
Use the presser foot dial to adjust the amount of
pressure that the presser foot applies to the fabric.
bHandle
Carry the sewing machine by its handle when
transporting the machine.
cHandwheel
Turn the handwheel toward you to raise and lower the
needle. The handwheel should be turned towards you
(counterclockwise).
dAir vent
The air vent allows the air surrounding the motor to
circulate. Do not cover the air vent while the sewing
machine is being used.
eMain power switch
Use the main power switch to turn the sewing machine
ON and OFF.
fFoot controller jack
Insert the plug on the end of the foot controller cable
into the foot controller jack.
gPower supply jack
Insert the plug on the power cord into the power supply
jack.
hFeed dog position switch
Use the feed dog position switch to lower the feed dogs.
iPresser foot lever
Raise and lower the presser foot lever to raise and lower
the presser foot.
Memo
zRefer to pages 9 through 12 while you are
learning to use your machine.

12
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Operation buttons
The operation buttons help you to easily perform various basic sewing machine operations.
a“Start/Stop” button
Press the “Start/Stop” button to start or stop sewing. The
machine sews at a slow speed at the beginning of
sewing while the button is depressed. When sewing is
stopped, the needle is lowered in the fabric. For details,
refer to “Starting to sew” (page 52).
The button lights up in green, red or orange, depending
on how the sewing machine is being operated.
b“Reverse/Reinforcement Stitch” button
Press the “Reverse/Reinforcement Stitch” button to sew
reverse stitches or reinforcement stitches. Reverse
stitches are sewn by keeping the button pressed down to
sew in the opposite direction. Reinforcement stitches
are sewn by sewing 3 to 5 stitches on top of each other.
For details, refer to “Securing the stitching” (page 54).
c“Needle Position” button
Press the “Needle Position” button to raise or lower the
needle. Pressing the button twice sews one stitch.
d“Thread Cutter” button
Press the “Thread Cutter” button after stopping sewing
to cut both the upper and the bobbin threads. For
details, refer to “Cutting the thread” (page 55).
eSewing speed controller
Slide the sewing speed controller to adjust the sewing
speed.
CAUTION
Note
zDo not press (“Thread Cutter” button) if
there is no fabric under the presser foot or
while the machine is sewing, otherwise
damage to the machine may occur.
zWhen cutting thread thicker than #30, nylon
thread or other special threads, use the
thread cutter on the side of the machine. For
details, refer to “Cutting the thread” (page
55).
Green: When the machine is ready to start
sewing or while it is sewing
Red: When the machine is not ready to
start sewing
Orange: When the bobbin winder shaft is
moved to the right for winding the
bobbin thread onto the bobbin
●Do not press (“Thread Cutter”
button) after the threads have already
been cut, otherwise the needle may
break, the threads may become tangled
or damage to the machine may occur.

Names of Machine Parts and Their Functions 13
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Operation panel
The operation panel, located on the front at the right of the sewing machine, consists of the LCD (liquid crystal
display) and keys for specifying various sewing settings.
aLCD (liquid crystal display)
Settings for the selected stitch and error messages for
incorrect operations appear in the LCD. Use keys b
and gthrough s, described below, to display various
items and select the settings. For details, refer to
“Understanding the LCD Screens” (page 18).
bSettings key
Press this key to select sewing settings, such as for left/
right mirror imaging, or other settings such as the
operation beep.
cNeedle stop position key
Press this key to select where the needle is positioned
when the sewing machine is stopped.
dAutomatic thread cutting key
Press this key to select the automatic thread cutting
setting. Press this key again to cancel the setting.
eAutomatic reverse/reinforcement stitch key
Press this key to select the automatic reverse/
reinforcement stitching setting. Press this key again to
cancel the setting.
fNeedle mode selection key (single/twin)
Press this key to select the twin needle sewing setting.
Each time this key is pressed, the setting switches
between that for single needle sewing and for twin
needle sewing.
gThread tension keys
The thread tension is usually set automatically. Press
or to adjust the thread tension setting.
hStitch width keys
Press or to adjust the stitch width setting.
iStitch length keys
Press or to adjust the stitch length setting.
■Stitch mode keys (j-m)
jPreset utility stitch/saved pattern key
Press this key to select the utility stitch assigned to a numeric
key or to retrieve a pattern that has been saved.
Each time this key is pressed, the machine switches between
the preset utility stitch mode and the saved pattern mode.
kUtility stitch key
Press this key to select a straight stitch, zigzag stitch,
buttonhole, blind hem stitch, or other stitches
commonly used in garment sewing. Use the numeric
keys to type in the number of the desired stitch.
lDecorative stitch key
Press this key to select a decorative stitch, satin stitch, cross-
stitch or decorative satin stitch. Each time this key is pressed,
the stitch group switches between and .
mCharacter stitch key
Press this key to select a character stitch. Each time this key
is pressed, the font switches to one of the three available.
nManual memory key
Press this key to save the adjusted thread tension and
stitch width and length settings.
oReset key
Press this key to reset the selected stitch to its original settings.
pMemory key
Press this key to save stitch patterns, such as combined
patterns and My Custom Stitch patterns, in the sewing
machine's memory.
qOK key
Press this key to apply the selection or perform the operation.
rCancel/clear key
Press this key to cancel the operation and return to the
previous screen.
In addition, pressing this key removes the last pattern
added when combining characters or decorative stitches.
sNumeric keys
Use these keys to quickly select one of the ten most
often used stitches. When selecting other stitches, use
these keys to type in the number of the desired stitch.
1
2
3
4
5
6
HI
G
7
8
9
D
E
F
0
A
B
C

14
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

1 GETTING READY
The various preparations required before starting to sew are described in this chapter.
TTurning the Machine On/Off ..................................................................................16
Power supply precautions ..................................................................................16
Turning on the machine .....................................................................................17
Turning off the machine .....................................................................................17
Understanding the LCD Screens..............................................................................18
Changing the Machine Settings ...............................................................................19
Changing the settings .........................................................................................19
Adjusting the brightness of the LCD...................................................................21
Changing the screen language ..............................................................................21
Winding/Installing the Bobbin.................................................................................22
Bobbin precautions ............................................................................................22
Winding the bobbin ...........................................................................................22
Installing the bobbin ..........................................................................................26
Upper Threading .....................................................................................................28
Threading the upper thread................................................................................28
Threading the needle..........................................................................................31
Threading the needle manually (without using the needle threader)..................33
Using the twin needle ........................................................................................33
Pulling up the bobbin thread..............................................................................36
Replacing the Needle ..............................................................................................37
Needle precautions ............................................................................................37
Needle types and their uses................................................................................38
Checking the needle...........................................................................................39
Replacing the needle ..........................................................................................39
Replacing the Presser Foot ......................................................................................41
Presser foot precautions .....................................................................................41
Replacing the presser foot ..................................................................................41
Adjusting the pressure of the presser foot ..........................................................43
Removing the presser foot holder ......................................................................43
Using the walking foot .......................................................................................44
Sewing Cylindrical or Large Pieces..........................................................................46
Stitching cylindrical pieces.................................................................................46
Sewing large pieces of fabric..............................................................................46

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
16
Turning the Machine On/Off
This section explains how to turn the sewing machine on and off.
Power supply precautions
Be sure to observe the following precautions concerning the power supply.
WARNING
CAUTION
●Use only regular household electricity for the power source. Using other power sources may
result in fire, electric shock, or damage to the machine.
• Make sure that the plugs on the power cord are firmly inserted into the electrical outlet
and the power supply jack on the machine.
• Do not insert the plug on the power cord into an electrical outlet that is in poor condition.
●Turn off the main power and remove the plug in the following circumstances:
• When you are away from the machine
• After using the machine
• When the power fails during use
• When the machine does not operate correctly due to a bad connection or a disconnection
• During electrical storms
●Use only the power cord included with this machine.
●Do not use extension cords or multi-plug adapters with many other appliances plugged in to
them. Fire or electric shock may result.
●Do not touch the plug with wet hands. Electric shock may result.
●When unplugging the machine, always turn off the main power first. Always grasp the plug to
remove it from the outlet. Pulling on the cord may damage the cord, or lead to fire or electric
shock.
●Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted,
or bundled. Do not place heavy objects on the cord. Do not subject the cord to heat. These
things may damage the cord and cause fire or electric shock. If the cord or plug is damaged,
take the machine to your authorized dealer for repairs before continuing use.
●Unplug the power cord if the machine is not to be used for a long period of time. Otherwise a
fire may result.

Turning the Machine On/Off 17
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Turning on the machine
Prepare the included power cord.
aMake sure that the sewing machine is turned
off (the main power switch is set to “ ”), and
then plug the power cord into the power
supply jack on the right side of the machine.
bInsert the plug of the power cord into a
household electrical outlet.
aPower supply jack
cPress the right side of the main power switch
on the right side of the machine (set it to “|”).
XThe sewing lamp and the LCD come on
when the machine is turned on.
Turning off the machine
When you are finished using the sewing machine,
turn it off. In addition, before transporting the sewing
machine to another location, be sure to turn it off.
aMake sure that the machine is not sewing.
bPress the left side of the main power switch on
the right side of the machine (set it to “ ”).
XThe sewing lamp and the LCD go off when
the machine is turned off.
cUnplug the power cord from the electrical
outlet.
Grasp the plug when unplugging the power
cord.
dUnplug the power cord from the power supply
jack.
Note
zIf a power outage occurs while the sewing
machine is being operated, turn off the
sewing machine and unplug the power cord.
When restarting the sewing machine, follow
the necessary procedure to correctly operate
the machine.
(For U.S.A. only)
zThis appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electrical shock, this plug is intended
to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not modify the plug in any way.
1

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
18
Understanding the LCD Screens
The LCD screen, located on the front at the right of the sewing machine, displays the settings for the
selected stitch and error messages if operations are performed incorrectly.When the sewing machine is
turned on, the LCD comes on and the following screen appears.
aPresser foot that should be used
bStitch mode
cSelected stitch
dStitch length (mm)
eStitch width (mm)
fUpper thread tension
Memo
zFor details on the error messages that appear when an operation is performed incorrectly, refer to “Error
messages” (page 155).
1
2
5
6
4
3