Brother N5V User manual

PANTONE 285 Black New_F1_brother_En_cover
GETTING READY
SEWING BASICS
UTILITY STITCHES
APPENDIX
English
885-U22
XE0403-001
Printed in China
Read before use.
Read when additional
information is required.
Computerized Sewing Machine
Operation Manual

1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Important Safety Instructions
Please read these safety instructions before attempting to use the machine.
This machine is intended for household use.
DANGER - To reduce the risk of electric shock:
1Always unplug the machine from the electrical outlet immediately after using, when cleaning,
when making any user servicing adjustments mentioned in this manual, or if you are leaving the
machine unattended.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons.
2Always unplug the machine from the electrical outlet when removing covers, lubricating, or
when making any adjustments mentioned in the instruction manual:
• To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp
the plug and pull it out of the electrical outlet. Do not pull on the cord.
• Plug the machine directly into the electrical outlet. Do not use an extension cord.
•Always unplug your machine if the power is cut.
3 Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or water is spilled on the unit. Return the machine to the nearest
authorized dealer or service center for examination, repair, electrical or mechanical adjustment.
While the machine is stored or in use if you notice anything unusual, such an odor, heat,
discoloration or deformation, stop using the machine and immediately unplug the power cord.
4 Always keep your work area clear:
• Never operate the machine with any air openings blocked. Keep ventilation openings of the
sewing machine and foot control free from the build up of lint, dust, and loose cloth.
•Do not store objects on the foot controller.
•Do not use extension cords. Plug the machine directly into the electrical outlet.
•Never drop or insert any object into any opening.
•Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
•Do not use the machine near a heat source, such as a stove or iron; otherwise, the machine,
power cord or garment being sewn may ignite, resulting in fire or an electric shock.

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
2
5 Special care is required when sewing:
•Always pay close attention to the needle. Do not use bent or damaged needles.
• Keep fingers away from all moving parts. Special care is required around the machine needle.
• Switch the sewing machine to the symbol “O” position to turn it off when making any adjustments
in the needle area.
•Do not use a damaged or incorrect needle plate, as it could cause the needle to break.
•Do not push or pull the fabric when sewing, and follow careful instruction when freehand stitching
so that you do not deflect the needle and cause it to break.
6This machine is not a toy:
• Your close attention is necessary when the machine is used by or near children.
• Do not use outdoors.
7 For a longer service life:
• When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store
the machine near a space heater, iron, halogen lamp, or other hot objects.
• Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders
can damage the case and machine, and should never be used.
• Always consult the operation manual when replacing or installing any assemblies, the presser feet,
needle, or other parts to assure correct installation.
8 For repair or adjustment:
• If the Light unit (light-emitting diode) is damaged, it must be replaced by authorized dealer.
• In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table
in the back of the operation manual to inspect and adjust the machine yourself. If the problem
persists, please consult your local authorized Brother dealer.
Use this machine only for its intended use as described in this manual.
Use accessories recommended by the manufacturer as contained in this manual.
Save these instructions.
The contents of this manual and specifications of this product are subject to change without notice.
For additional product information, visit our web site at www.brother.com

3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY
IMPORTANT
• In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the
mark, rating as marked on plug.
• Always replace the fuse cover. Never use plugs with the fuse cover omitted.
• If the available electrical outlet is not suitable for the plug supplied with this equipment, you
should contact your authorized dealer to obtain the correct lead.
FOR USERS IN AUSTRALIA AND NEW ZEALAND
This sewing machine is not intended to be used by young children, and assistance may be required if
used by a person with a disability.

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
4
Contents
Important Safety Instructions ..............................................................................................1
Introduction ........................................................................................................................7
Sewing Machine Features ....................................................................................................7
Accessories..........................................................................................................................8
Included accessories .........................................................................................................................................8
Optional accessories .........................................................................................................................................9
Names of Machine Parts and Their Functions ...................................................................10
Front view.......................................................................................................................................................10
Needle and presser foot section ...................................................................................................................... 11
Right-side/rear view ........................................................................................................................................11
Operation buttons ...........................................................................................................................................12
Operation panel..............................................................................................................................................13
GETTING READY 15
Turning the Machine On/Off.............................................................................................16
Power supply precautions ...............................................................................................................................16
Turning on the machine .................................................................................................................................. 17
Turning off the machine .................................................................................................................................. 17
Understanding the LCD Screens........................................................................................18
Changing the Machine Settings .........................................................................................19
Changing the settings ......................................................................................................................................19
Adjusting the brightness of the LCD ................................................................................................................21
Changing the screen language.................................................................................................................................. 21
Winding/Installing the Bobbin...........................................................................................22
Bobbin precautions .........................................................................................................................................22
Winding the bobbin ........................................................................................................................................22
Installing the bobbin .......................................................................................................................................26
Upper Threading ...............................................................................................................28
Threading the upper thread .............................................................................................................................28
Threading the needle ...................................................................................................................................... 31
Threading the needle manually (without using the needle threader) ................................................................33
Using the twin needle ..................................................................................................................................... 33
Pulling up the bobbin thread...........................................................................................................................36
Replacing the Needle ........................................................................................................37
Needle precautions .........................................................................................................................................37
Needle types and their uses.............................................................................................................................38
Checking the needle ....................................................................................................................................... 39
Replacing the needle.......................................................................................................................................39
Replacing the Presser Foot ................................................................................................41
Presser foot precautions .................................................................................................................................. 41
Replacing the presser foot ...............................................................................................................................41
Adjusting the pressure of the presser foot ........................................................................................................ 43
Removing the presser foot holder.................................................................................................................... 43
Using the walking foot .................................................................................................................................... 44
Sewing Cylindrical or Large Pieces....................................................................................46
Stitching cylindrical pieces.............................................................................................................................. 46
Sewing large pieces of fabric........................................................................................................................... 46

5
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
SEWING BASICS 49
Sewing...............................................................................................................................50
General sewing procedure .............................................................................................................................. 50
Positioning the fabric ......................................................................................................................................51
Starting to sew................................................................................................................................................. 52
Securing the stitching ...................................................................................................................................... 54
Cutting the thread ...........................................................................................................................................55
Adjusting the Thread Tension............................................................................................57
Changing the tension of the upper thread........................................................................................................ 57
Adjusting the Stitch Width and Length ..............................................................................58
Adjusting the stitch width................................................................................................................................ 58
Adjusting the stitch length ...............................................................................................................................59
Useful Functions................................................................................................................60
Changing the needle stop position ..................................................................................................................60
Automatically sewing reverse/reinforcement stitches................................................................................................ 60
Automatically cutting the thread .....................................................................................................................62
Saving stitch settings .......................................................................................................................................63
Hands-free raising and lowering of the presser foot .........................................................................................64
Useful Sewing Tips ............................................................................................................65
Trial sewing ....................................................................................................................................................65
Changing the sewing direction................................................................................................................................. 65
Sewing curves .................................................................................................................................................65
Sewing thick fabrics ........................................................................................................................................66
Sewing thin fabrics..........................................................................................................................................66
Sewing stretch fabrics...................................................................................................................................... 66
Sewing leathers or vinyl fabrics .......................................................................................................................67
Sewing an even seam allowance..................................................................................................................... 67
UTILITY STITCHES 69
Selecting Stitching .............................................................................................................70
Selecting stitch types and patterns ...................................................................................................................70
Selecting stitching ...........................................................................................................................................72
Overcasting Stitches..........................................................................................................76
Sewing overcasting stitches using overcasting foot “G” ...................................................................................76
Sewing overcasting stitches using zigzag foot “J”............................................................................................. 77
Sewing overcasting stitches using the optional side cutter ...............................................................................78
Basic Stitching ...................................................................................................................80
Basting ............................................................................................................................................................80
Basic stitching ................................................................................................................................................. 81
Blind Hem Stitching ..........................................................................................................82
Buttonhole Stitching/Button Sewing..................................................................................84
Buttonhole sewing ..........................................................................................................................................85
Button sewing .................................................................................................................................................89
Zipper Insertion.................................................................................................................91
Inserting a centered zipper ..............................................................................................................................91
Inserting a side zipper .....................................................................................................................................93
Zipper/piping Insertion .....................................................................................................96
Inserting a centered zipper ..............................................................................................................................96
Inserting a piping ............................................................................................................................................97
Sewing Stretch Fabrics and Elastic Tape ............................................................................98
Stretch stitching............................................................................................................................................... 98
Elastic attaching ..............................................................................................................................................98

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
6
Appliqué, Patchwork and Quilt Stitching ........................................................................100
Appliqué stitching ......................................................................................................................................... 101
Patchwork (crazy quilt) stitching ...................................................................................................................102
Piecing..........................................................................................................................................................102
Quilting ........................................................................................................................................................103
Free-motion quilting......................................................................................................................................104
Satin stitching using the sewing speed controller........................................................................................... 105
Reinforcement Stitching ..................................................................................................107
Triple stretch stitching ...................................................................................................................................107
Bar tack stitching...........................................................................................................................................107
Darning......................................................................................................................................................... 109
Eyelet Stitching................................................................................................................111
Decorative Stitching........................................................................................................112
Fagoting ........................................................................................................................................................113
Scallop stitching............................................................................................................................................114
Smocking ......................................................................................................................................................114
Shell tuck stitching ........................................................................................................................................ 115
Joining ..........................................................................................................................................................116
Heirloom stitching ........................................................................................................................................116
Sewing the Various Built-In Decorative Patterns.............................................................119
Sewing beautiful patterns .............................................................................................................................. 119
Sewing patterns.............................................................................................................................................119
Combining patterns.......................................................................................................................................120
Repeat sewing patterns.................................................................................................................................. 121
Checking the selected pattern .......................................................................................................................121
Changing the pattern size..............................................................................................................................122
Changing the stitch density ........................................................................................................................... 123
Changing the pattern length ..........................................................................................................................124
Mirror imaging the pattern ............................................................................................................................ 125
Saving patterns..............................................................................................................................................126
Retrieving a pattern .......................................................................................................................................126
Realigning the pattern ...................................................................................................................................127
Designing a Pattern .........................................................................................................129
Drawing a sketch of the pattern.....................................................................................................................129
Entering the pattern data ............................................................................................................................... 130
Examples of designs ......................................................................................................................................132
APPENDIX 133
Stitch Settings..................................................................................................................134
Utility stitches ...............................................................................................................................................134
Other stitches................................................................................................................................................138
Care and Maintenance ....................................................................................................142
Cleaning the machine surface ................................................................................................................................ 142
Cleaning the race ..........................................................................................................................................142
Troubleshooting ..............................................................................................................144
Error messages ..............................................................................................................................................148
Nothing appears in the LCD.......................................................................................................................... 149
Operation beep............................................................................................................................................. 149
Cancelling the operation beep ............................................................................................................................... 149
Index ................................................................................................................................151

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Introduction 7
Introduction
Thank you for purchasing this sewing machine. Before using this sewing machine, carefully read the
“Important Safety Instructions” (page 1), and then study this manual for the correct operation of the
various functions. In addition, after you have finished reading this manual, store it where it can quickly be
accessed for future reference.
Sewing Machine Features
aEasy upper threading
Since the spool can be installed at the front of the sewing machine, the upper thread can easily be threaded. In addition,
the needle can be threaded with a simple operation (page 28).
bAutomatic thread-cutting
The sewing machine can be set to automatically cut the thread at the end of the stitching (page 62).
cOne-touch lower threading
You can start sewing without pulling up the bobbin thread (page 26).
dSimple bobbin-winding
The bobbin can quickly and easily be wound with thread (page 22).
eBuilt-in stitches
You can select from the built-in stitches available, including utility stitches, character stitches and decorative stitches.
fKnee lifter
Use the knee lifter to raise and lower the presser foot with your knee, leaving both hands free to handle the fabric (page
64).

8
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Accessories
After opening the box, check that the following accessories are included. If any item is missing or
damaged, contact your dealer.
Included accessories
The following items should also be included in the box.
■Attaching the stitch pattern plate
The stitch pattern plate shows the stitch numbers and the patterns available with each stitch mode. Attach
the stitch pattern plate to the handle as shown in the illustration below.
Note
(For U.S.A. only)
zFoot controller: Model N5V
This foot controller can be used on this machine model
NX-450.
zThe screw for the presser foot holder is available
through your authorized dealer.
(Part code: XA4813-051)
zThe organized accessory tray is available through your
authorized dealer.
(Part code: XC4489-051)

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Accessories 9
Optional accessories
The following are available as optional accessories.
Memo
zTo obtain optional accessories or parts, contact your sales representative or the nearest authorized
service center.
1. 2. 3. 4. 5. 6. 7. 8. 9.
10. 11. 12. 13. 14. 15. 16.*17. 18. 19.
20. 21. 22. 23. 24. 25. 26. 27. 28.
29. 30. 31. 32. 33. 34. 35.
*75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
No. Part Name
Part Code
No. Part Name
Part Code
U.S.A./
Canada
Others
U.S.A./
Canada
Others
1 Buttonhole foot “A” XC2691-053 19 Eyelet punch 135793-001
2 Overcasting foot “G” XC3098-051 20 Screwdriver (large) XC8349-051
3 Monogramming foot “N” X53840-351 21 Screwdriver (small) X55468-051
4 Zipper foot “I” X59370-051 22 Spool cap (large) 130012-054
5
Zigzag foot “J” (on machine) XC3021-051 23 Spool cap (medium)(2) X55260-153
6 Blind stitch foot “R” X56409-051 24 Spool cap (small) 130013-154
7 Button fitting foot “M” 130489-001 25 Extra spool pin XC4654-051
8 Walking foot SA140
F033N (XC2214-002) 26 Spool net XA5523-050
9 Quilting foot SA129
F005N (XC1948-002)
27 Foot controller XD0496-051 (EU area)
10 Stitch guide foot “P” SA160 F035 (XC1969-002) XC6651-151 (other areas)
11
Adjustable zipper/piping foot SA161 F036N (XC1970-002) 28 Grid sheet set SA527 GS4 (XC4549-050)
12 Non stick foot SA114
F007N (XC1949-002) 29 Knee lifter XA6941-052
13 Open toe foot SA147
F027N (XC1964-002) 30 Operation manual XE0403-001
14 Seam ripper X54243-051 31 Quick reference guide XE0404-001
15 Bobbin (4) SA156 SFB (XA5539-151) 32 Hard case XC9701-052
16 Needle set X58358-051 33 Accessory bag XC4487-051
17 Twin needle X59296-151 34 Disc-shaped screwdriver XC1074-051
18 Cleaning brush X59476-051 35 Stitch pattern plate XE0539-001
1. 2. 3. 4. 5.
1. Side cutter Part code: SA177, F054(XC3879-002)
2. Quilting guide Part code: SA132, F016N(XC2215-002)
3. Wide table Part code: SA551, WT5(XC9567-152)
4.
1/4 inch quilting foot Part code: SA125, F001N(XC1944-052)
5. 1/4 inch quilting
foot with guide Part code: SA185, F057(XC7416-252)

10
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Names of Machine Parts and Their Functions
The names of the various parts of the sewing machine and their functions are described below. Before
using the sewing machine, carefully read these descriptions to learn the names of the machine parts.
Front view
aThread guide plate
Pass the thread under the thread guide plate.
bThread guide cover
Pass the thread behind the thread guide cover when
threading the upper thread.
cSpool pin
Place a spool of thread on the spool pin.
dBobbin winding thread guide and pretension disk
Pass the thread under this thread guide and around the
pretension disk when winding the bobbin thread.
eTop cover
Open the top cover to place the spool of thread on the
spool pin.
fBobbin winder
Use the bobbin winder when winding the bobbin.
gOperation panel
Use for stitch selection and various stitch functions.
(page 13)
hKnee lifter mounting slot
Insert the knee lifter into the knee lifter mounting slot.
iOperation buttons and sewing speed controller
Use these buttons and the slide to operate the sewing
machine. (page 12)
jFlat bed attachment with accessory compartment
Store presser feet and bobbins in the accessory
compartment of the flat bed attachment. When sewing
cylindrical pieces, remove the flat bed attachment.
kThread cutter
Pass the threads through the thread cutter to cut them.
lNeedle threader lever
Use the needle threader to thread the needle.
mThread take-up lever check window
Look through the window to check the position of the
take-up lever.
nThread tension dial
Use the thread tension dial to adjust the tension of the
upper thread.
1
9
8
0
A
B
C
D
2
3
4
5
6
7

Names of Machine Parts and Their Functions 11
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Needle and presser foot
section
aButtonhole lever
The buttonhole lever is used with the one-step
buttonhole foot to create buttonholes.
bThread guide disk
Pass the thread through the thread guide disk when
using the needle threader to thread the needle.
cNeedle bar thread guide
Pass the upper thread through the needle bar thread
guide.
dNeedle plate
The needle plate is marked with guides to help sew
straight seams.
eNeedle plate cover
Remove the needle plate cover to clean the bobbin case
and race.
fBobbin cover
Open the bobbin cover to set the bobbin.
gFeed dogs
The feed dogs feed the fabric in the sewing direction.
hPresser foot
The presser foot applies pressure consistently on the
fabric as sewing takes place. Attach the appropriate
presser foot for the selected stitch.
iPresser foot holder
The presser foot is attached onto the presser foot holder.
Right-side/rear view
aPresser foot dial
Use the presser foot dial to adjust the amount of
pressure that the presser foot applies to the fabric.
bHandle
Carry the sewing machine by its handle when
transporting the machine.
cHandwheel
Turn the handwheel toward you to raise and lower the
needle. The handwheel should be turned towards you
(counterclockwise).
dAir vent
The air vent allows the air surrounding the motor to
circulate. Do not cover the air vent while the sewing
machine is being used.
eMain power switch
Use the main power switch to turn the sewing machine
ON and OFF.
fFoot controller jack
Insert the plug on the end of the foot controller cable
into the foot controller jack.
gPower supply jack
Insert the plug on the power cord into the power supply
jack.
hFeed dog position switch
Use the feed dog position switch to lower the feed dogs.
iPresser foot lever
Raise and lower the presser foot lever to raise and lower
the presser foot.
Memo
zRefer to pages 9 through 12 while you are
learning to use your machine.

12
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Operation buttons
The operation buttons help you to easily perform various basic sewing machine operations.
a“Start/Stop” button
Press the “Start/Stop” button to start or stop sewing. The
machine sews at a slow speed at the beginning of
sewing while the button is depressed. When sewing is
stopped, the needle is lowered in the fabric. For details,
refer to “Starting to sew” (page 52).
The button lights up in green, red or orange, depending
on how the sewing machine is being operated.
b“Reverse/Reinforcement Stitch” button
Press the “Reverse/Reinforcement Stitch” button to sew
reverse stitches or reinforcement stitches. Reverse
stitches are sewn by keeping the button pressed down to
sew in the opposite direction. Reinforcement stitches
are sewn by sewing 3 to 5 stitches on top of each other.
For details, refer to “Securing the stitching” (page 54).
c“Needle Position” button
Press the “Needle Position” button to raise or lower the
needle. Pressing the button twice sews one stitch.
d“Thread Cutter” button
Press the “Thread Cutter” button after stopping sewing
to cut both the upper and the bobbin threads. For
details, refer to “Cutting the thread” (page 55).
eSewing speed controller
Slide the sewing speed controller to adjust the sewing
speed.
CAUTION
Note
zDo not press (“Thread Cutter” button) if
there is no fabric under the presser foot or
while the machine is sewing, otherwise
damage to the machine may occur.
zWhen cutting thread thicker than #30, nylon
thread or other special threads, use the
thread cutter on the side of the machine. For
details, refer to “Cutting the thread” (page
55).
Green: When the machine is ready to start
sewing or while it is sewing
Red: When the machine is not ready to
start sewing
Orange: When the bobbin winder shaft is
moved to the right for winding the
bobbin thread onto the bobbin
●Do not press (“Thread Cutter”
button) after the threads have already
been cut, otherwise the needle may
break, the threads may become tangled
or damage to the machine may occur.

Names of Machine Parts and Their Functions 13
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Operation panel
The operation panel, located on the front at the right of the sewing machine, consists of the LCD (liquid crystal
display) and keys for specifying various sewing settings.
aLCD (liquid crystal display)
Settings for the selected stitch and error messages for
incorrect operations appear in the LCD. Use keys b
and gthrough r, described below, to display various
items and select the settings. For details, refer to
“Understanding the LCD Screens” (page 18).
bSettings key
Press this key to select sewing settings, such as for left/
right mirror imaging, or other settings such as the
operation beep.
cNeedle stop position key
Press this key to select where the needle is positioned
when the sewing machine is stopped.
dAutomatic thread cutting key
Press this key to select the automatic thread cutting
setting. Press this key again to cancel the setting.
eAutomatic reverse/reinforcement stitch key
Press this key to select the automatic reverse/
reinforcement stitching setting. Press this key again to
cancel the setting.
fNeedle mode selection key (single/twin)
Press this key to select the twin needle sewing setting.
Each time this key is pressed, the setting switches
between that for single needle sewing and for twin
needle sewing.
gStitch width keys
Press or to adjust the stitch width setting.
hStitch length keys
Press or to adjust the stitch length setting.
■Stitch mode keys (i-l)
iPreset utility stitch/saved pattern key
Press this key to select the utility stitch assigned to a numeric
key or to retrieve a pattern that has been saved.
Each time this key is pressed, the machine switches between
the preset utility stitch mode and the saved pattern mode.
jUtility stitch key
Press this key to select a straight stitch, zigzag stitch,
buttonhole, blind hem stitch, or other stitches
commonly used in garment sewing. Use the numeric
keys to type in the number of the desired stitch.
kDecorative stitch key
Press this key to select a decorative stitch, satin stitch, cross-
stitch or decorative satin stitch. Each time this key is pressed,
the stitch group switches between and .
lCharacter stitch key
Press this key to select a character stitch. Each time this key
is pressed, the font switches to one of the three available.
mManual memory key
Press this key to save the adjusted stitch width and
length settings.
nReset key
Press this key to reset the selected stitch to its original settings.
oMemory key
Press this key to save stitch patterns, such as combined
patterns and My Custom Stitch patterns, in the sewing
machine's memory.
pOK key
Press this key to apply the selection or perform the operation.
qCancel/clear key
Press this key to cancel the operation and return to the
previous screen.
In addition, pressing this key removes the last pattern
added when combining characters or decorative stitches.
rNumeric keys
Use these keys to quickly select one of the ten most
often used stitches. When selecting other stitches, use
these keys to type in the number of the desired stitch.
1
2
3
4
5
6
GH
F
7
8
C
D
E
9
0
A
B

14
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

1 GETTING READY
The various preparations required before starting to sew are described in this chapter.
TTurning the Machine On/Off ..................................................................................16
Power supply precautions ..................................................................................16
Turning on the machine .....................................................................................17
Turning off the machine .....................................................................................17
Understanding the LCD Screens..............................................................................18
Changing the Machine Settings ...............................................................................19
Changing the settings .........................................................................................19
Adjusting the brightness of the LCD...................................................................21
Changing the screen language ..............................................................................21
Winding/Installing the Bobbin.................................................................................22
Bobbin precautions ............................................................................................22
Winding the bobbin ...........................................................................................22
Installing the bobbin ..........................................................................................26
Upper Threading .....................................................................................................28
Threading the upper thread................................................................................28
Threading the needle..........................................................................................31
Threading the needle manually (without using the needle threader)..................33
Using the twin needle ........................................................................................33
Pulling up the bobbin thread..............................................................................36
Replacing the Needle ..............................................................................................37
Needle precautions ............................................................................................37
Needle types and their uses................................................................................38
Checking the needle...........................................................................................39
Replacing the needle ..........................................................................................39
Replacing the Presser Foot ......................................................................................41
Presser foot precautions .....................................................................................41
Replacing the presser foot..................................................................................41
Adjusting the pressure of the presser foot ..........................................................43
Removing the presser foot holder ......................................................................43
Using the walking foot .......................................................................................44
Sewing Cylindrical or Large Pieces..........................................................................46
Stitching cylindrical pieces.................................................................................46
Sewing large pieces of fabric..............................................................................46

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
16
Turning the Machine On/Off
This section explains how to turn the sewing machine on and off.
Power supply precautions
Be sure to observe the following precautions concerning the power supply.
WARNING
CAUTION
●Use only regular household electricity for the power source. Using other power sources may
result in fire, electric shock, or damage to the machine.
• Make sure that the plugs on the power cord are firmly inserted into the electrical outlet
and the power supply jack on the machine.
• Do not insert the plug on the power cord into an electrical outlet that is in poor condition.
●Turn off the main power and remove the plug in the following circumstances:
• When you are away from the machine
• After using the machine
• When the power fails during use
• When the machine does not operate correctly due to a bad connection or a disconnection
• During electrical storms
●Use only the power cord included with this machine.
●Do not use extension cords or multi-plug adapters with many other appliances plugged in to
them. Fire or electric shock may result.
●Do not touch the plug with wet hands. Electric shock may result.
●When unplugging the machine, always turn off the main power first. Always grasp the plug to
remove it from the outlet. Pulling on the cord may damage the cord, or lead to fire or electric
shock.
●Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted,
or bundled. Do not place heavy objects on the cord. Do not subject the cord to heat. These
things may damage the cord and cause fire or electric shock. If the cord or plug is damaged,
take the machine to your authorized dealer for repairs before continuing use.
●Unplug the power cord if the machine is not to be used for a long period of time. Otherwise a
fire may result.

Turning the Machine On/Off 17
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Turning on the machine
Prepare the included power cord.
aMake sure that the sewing machine is turned
off (the main power switch is set to “ ”), and
then plug the power cord into the power
supply jack on the right side of the machine.
bInsert the plug of the power cord into a
household electrical outlet.
aPower supply jack
cPress the right side of the main power switch
on the right side of the machine (set it to “|”).
XThe sewing lamp and the LCD come on
when the machine is turned on.
Turning off the machine
When you are finished using the sewing machine,
turn it off. In addition, before transporting the sewing
machine to another location, be sure to turn it off.
aMake sure that the machine is not sewing.
bPress the left side of the main power switch on
the right side of the machine (set it to “ ”).
XThe sewing lamp and the LCD go off when
the machine is turned off.
cUnplug the power cord from the electrical
outlet.
Grasp the plug when unplugging the power
cord.
dUnplug the power cord from the power supply
jack.
Note
zIf a power outage occurs while the sewing
machine is being operated, turn off the
sewing machine and unplug the power cord.
When restarting the sewing machine, follow
the necessary procedure to correctly operate
the machine.
(For U.S.A. only)
zThis appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electrical shock, this plug is intended
to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not modify the plug in any way.
1

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
18
Understanding the LCD Screens
The LCD screen, located on the front at the right of the sewing machine, displays the settings for the
selected stitch and error messages if operations are performed incorrectly.When the sewing machine is
turned on, the LCD comes on and the following screen appears.
aPresser foot that should be used
bStitch mode
cSelected stitch
dStitch length (mm)
eStitch width (mm)
Memo
zFor details on the error messages that appear when an operation is performed incorrectly, refer to “Error
messages” (page 148).
1
2
5
4
3

Changing the Machine Settings 19
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Changing the Machine Settings
Various sewing machine operations and sewing settings can be changed.
Changing the settings
The general procedure for changing machine settings
is described below.
aTurn on the sewing machine.
XThe LCD comes on.
bPress (Settings key) in the operation
panel.
XThe settings screen appears.
cPress or (Stitch length keys) until the
stitch or machine attribute that you wish to set
is displayed.
aStitch length keys
dPress or (Stitch width keys) until the
desired setting is selected.
XThe setting is changed.
ePress (OK key) or (Cancel/clear
key).
XThe initial stitch screen appears again.
1