BSi MTFstand User manual

MTFstand
-
Stainless Steel
Dispenser Stand
MTFstand-EN_US
BSI Co., Ltd.
for Hand Sanitizer
滾滾長江東逝水
SPECTIFICATIONS
Materials
Dimensions (See Page 2)
L Support Plate
Pipe
Base
Hardware Bag
Made in Taiwan
L Support Plate
Pipe
Base
Stainless Steel
Stainless Steel
Stainless Steel, Rubber
Weight
Origin
Model No. MTFstand
710g
755g
4,750g
6g
Caution Every screw needs to be tightened to avoid
shake and loose.
FEATURES
100% Stainless Steel
Easy Installation (Only 3 Steps)
*Dispenser Sold Separately
Durable & Easily Clean

BSI Co., Ltd.
[phone]
[phone]
[email protected]
3F, No.83, Shuren Rd., Shanhua Dist.,
Tainan City 741, Taiwan
truflo.com.tw
TEL
FAX
EMAIL
ADD
WEB
DIMENSIONS
1150mm 1100mm 800mm
360mm
800mm 1070mm 1070mm
360mm
880mm 880mm
SCHEMATIC
ASSEMBLY INSTRUCTIONS
Put the rubber base and stainless steel
cover together. Take a flat washer, install-
ing it to the 3/8-16*3 hex head cap screw,
tilting the base to insert the screw to the
bottom of the base. Insert the pole (the
depth side) to the top of the base, then
turn it to attach the base.
Position the stand to the floor, putting the
L Support Plate to the top of the stand,
screwing the 3/8-16*5/8 hex head cap
screw with a flat washer to the corre-
sponding hole. Stand on the base and
turn the top to tighten the stand.
Open the dispenser. Align the two screws
on the L Support Plate to the holes on the
backplate, screwing the M4*7*5mm hex
nylon insert nuts to the screws. Finally,
install the bottle filled with chemicals and
batteries, locking the machine to finish
the installation.
HARDWARE BAG INCLUDES
3/8-16*3
HEX HEAD
CAP SCREW
3/8-16*5/8
HEX HEAD
CAP SCREW
10MM(ID)
20MM(OD)
FLAT WASHER
4*12MM
MACHINE
SCREWS
M4*7*5MM
HEX NYLON
INSERT NUTS
ASSEMBLY
TOOLS
12
3
1
2
3
1
2
3