Bullet 3S User manual

QUICK GUIDE
ORIGINALITY DESIGN SMART AND BEAUTIFUL
3S

1
Bullet 3S
Screw package Manual
What's in the box
Consult the checklist below for all components.
Power adapter

2
Description
Power
Status light
DC12V±10%
Red light solids on: the camera network is abnormal
Blinking red light: awaiting WiFi connection (faster blinking)
Blue light solids on: camera running correctly
Blinking blue light: currently connecting (faster blinking)
Captures sound for your video
Supports local SD Card storage (Max.128G)
Speaker speak with the app and it will revert too
Press and hold for 5 seconds to reset the camera (if you have
modified settings, they will return to factory defaults)
Microphone
SD card
Speaker
Reset 1&2
Microphone
Reset1
Power
Reset2
Status light
Speaker
SD card slot

3
1 Fix the Camera to the wall with screws
2 Ajust camera angle to a correct view（as shown in the picture）
Install

4
Download
Smart Life is available for both iOS and Android OS. Rearch the name 'Smart Life'
in App Store or Android Market, or scan the QR-Code to download the App.
Set up router
This camera only supports 2.4GHz WiFi networks.Check that your WiFi router is
switched on.For a faster installation,place the camera and your smartphone near
the WiFi router(Internet box) in order to benefit from a better connection.
Connect
Please keep network available
Android
IOS
·Support
Download App(IOS&android)

Registration process
Step 1 Open the Smart Life App, click "Register", read the "Privacy Policy"
and click "Agree" .
Step 2
5
input a legal and valid Mobile number or Email address and click
"Continue". Input Verification Code, then log in the app.

6
QR Code Configuration
Open the Smart Life App, click "Create family", and you can customize
the Family name and related settings .
1
Continue to click "Security & Sensor" >> "Smart Camera",and then choose
"Add Device" or "+",ready to add camera.
2

7
In "Add Device" this interface,continue to click "next step",and then
you should input your WiFi's passwords.
3
Note:
1) Camera only supports 2.4GHz WiFi network.
2) The number of bits in the ssid and passwords of the router
should not exceed 24 digits.

8
In this interface,you should scan the QR code in your phone with the
camera.When the doorbell comes out with a "dong dong dong" sound
you can complete the configuration in about 30 seconds.
4

9
When connecting,you should make sure your router,mobile,and camera
are as close as possible.When camera added successffully,click " "
you could also DIY the camera's name.
5

10
In "Smart Camera" interface,click " ",you can set the camera common
functions.
Settings

11
FAQ
Q: In the network process, the process bar is always not 100%, add
failure?
A: This smart doorbell only supports 2.4GHz WiFi router, please make sure you
are using a 2.4GHz WiFi router.And confirm the WiFi password again.
Q: Repeated additions are failures?
A: After adding a failure, it is recommended to restart the device or power
off, and then try to add again.
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the smart doorbell close
to the router, and if not, it is recommended to reset the device and add it
again.
Q: How to cut the smart doorbell network to another router?
A: First remove and reset the smart doorbell on the App and then configure the
smart doorbell again by the App.
Q: Why I can
' t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened;Message notification and
authority confirmation in the mobile phone system have been opened.
Q: Why doesn't the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF
card can't be identified when the internet environment is not good.

Daytime Night
12
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send
you push notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD Storage or
Cloud Storage.
Daytime & Night
Never miss a moment, even in complete darkness, with powerful
night-vision technology.
功能介绍
Functions
Daytime
Night

FCC Statement：
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference,and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However,there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.