Bulow Stand BS15-2 User manual

Assembly instructions
BS15-2

Overview of parts
4x 4x4x 4x2x 3x 1x 1x 1x 16x
Option A1.
Option A2.
B. E.
C.
D.
A shelf can be purchased as an option for BS15.
It’s ideal for items located close to the TV such
as a soundbar, game-box or TV-reciever.
J-1. L-1. 6mm
parts used for assembly of BS15 Parts to attach TV
J-2. L-2. 8mmF. G. H1. H2. I. K.

1
A1. A2.
J-1. I-1.
J-2. I-2.
K. J.
www.bulowstand.com . [email protected] . [phone]

E.
F.
A1
I.
H1.
H2.
2
www.bulowstand.com . [email protected] . [phone]
Don not screw all the way to the bottom.
Leave a small gap of approximately 5 mm/0.2 inches.
5 mm/0.2 inches

3
G.
C.
D.
B.
www.bulowstand.com . [email protected] . [phone]
E.
E.
D.
You also change the initial height of
the TV on BS15 by swopping the
position of E. and F. on to D.
You can change the initial height of the
TV on BS15 by adjusting the position of
F. and E. on to D. This option requires
additional screws which need purchase.
Adjust the position of
F. and E. according to
the specs of the TV.
E.
D.
D.
L1./L2
L1./L2
L1./L2
L1./L2

4
www.bulowstand.com . [email protected] . [phone]
Gently align TV and top of BS15 to the bottom part.
Then lower the TV and top of BS15 so the two screws
passed through the ‘keyholes’.
Gently push the TV and top of BS15 so the two screws
are positioned in the narrow end of the ‘keyholes’.
Align and fasten screws.

5
www.bulowstand.com . [email protected] . [phone]
G.

www.bulowstand.com