Bundutec Added Room User manual

ADDED ROOM
MANUAL
TM

The ADDED ROOM
2
Our Added Room follows the same product guidelines – ease of use.
It oers a private entry to your tent and keeps o the rain.
It has openings on each side at the top which, due to its nature, cannot be permanently closed.
The side panel used to enclose it is a basic design that oers privacy and ventilation.
It was also designed to be easy to use and remove and does not oer any luxurious trimmings,
but rather a straightforward design with utility in mind.
The Added Room comes in a standard size and a custom size for longer BunduTops. Please note
that - it can’t be manufactured smaller than our standard size.
PLEASE NOTE that when using it for the rst time the canvas can be sti.
It gets coated with various resins to ensure its longevity and UV qualities, so when rst operating
the canvas has no “memory” of how to fold.
After a couple of uses, the canvas will evolve a “memory” of how to fold and the folding will be-
come neater and easier as time passes.
The initial folding process will seem sti but with time it will ease into its shape and fold neatly.
INCLUDES
You Will Receive:
• 1 x Long Rope Guide Extrusion
• 2 x Short Rope Guide Extrusion
• 2 x Rods
• 1 x Round Tube
• 1 x Added Room Roof
• Side Panel Optional
Pros & Cons
Pros:
• The added room oers shade, keeps o rain and oers a private entry to your tent when
utilising the side panel.
Cons:
• It absolutely cannot be closed entirely where the top of the added room goes under the tent
awning. There will be a small opening.
TO GET THE FULL BENEFIT OF YOUR GUARANTEES AND
WARRANTIES PLEASE READ THE MANUAL IN ITS ENTIRETY

How TOS:
Step 1:
Mount the long Rope Guide Extrusion on the edge on TOP of the BunduTop, not the side.
The Added Room will slide into this slot.
Step 2:
Mount the two short Rope Guide Extrusions on the sides of the BunduTop, one to each side.
When open the rods will slide into the guides.
QUICK TIP: ADD ANOTHER RIVET OR BOLT TO HOOK THE LOOPS
ONTO TO KEEP YOUR ADDED ROOM’S SIDES TAUT.
Step3:
Slide the Added Room into the top long Rope Guide.
Knot each end so that it will stay in place and cut o any extra length rope. You can glue the rope as
well as an extra safety measure against the knot untying.
Unzip the bag and unroll the canvas.
Step 4:
Lift the BunduTop until it is about half way open.
This is to assist with inserting the rods – it keeps the mass of canvas out of your way and makes the
process easier.
Step 5:
Fit the Rods into the holes on the Tube, and then slide them into the Rope Guide on the sides.
Step 6:
Open your BunduTop completely.
You can now t the Side Panel to the Added Room if necessary.
3
THE GUARANTEES AND WARRANTIES
DO NOT COVER USER ERROR

By phoning the oce, Front Desk can follow up on all
calls and make sure they are attended to.
South Africa
BunduTec
Front Desk
Tel: [phone]
Email: [email protected]
Australia
Bundutec Australia
Tel: [phone]
Email: [email protected]
United Arab Emirates
The Great White
Tel: [phone]
Email: [email protected] | [email protected]
Europe & United Kingdom
Tu-Trek Ltd
Tel: [phone]
Email: dara@tu-trek.com
Kenya
Alan Brooks
Tel: [phone]
Email: [email protected]
Namibia
Oroad Center Windhoek
Tel:[phone]
Email: o[email protected]
Bushwhackers Campworld Swakopmund
Tel:[phone]
Email: [email protected]
Bushwhackers Windhoek
Tel: [phone]
Email: [email protected]
United States of America
BundutecUSA,
Email: [email protected]
Tel: [phone]
CONTACT US