Burg Wächter secuENTRY 5705 HALF User manual

www.burg.biz
BURG-WÄCHTER KG
Altenhofer Weg 15
58300 Wetter
Germany
Operating instructions
secuENTRY KeyApp
iOS version
English
Contents index
Description .......................................................................................................................... 2
1 Download and install the secuENTRY KeyApp .................................................... 2
2 Setting up the secuENTRY KeyApp ......................................................................... 2
3 How is alock registered in the secuENTRY KeyApp? ......................................... 4
4 Open with the secuENTRY KeyApp ......................................................................... 4
5 Functions ........................................................................................................................... 5
5.1 secuENTRY E-Key ............................................................................................... 5
5.1.1 Manuel registration .............................................................................. 5
5.1.2 E-Key functions ...................................................................................... 6
5.1.3 secuENTRY units ................................................................................. 10
5.2 secuENTRY Bridge .......................................................................................... 11
5.2.1 Log in/ Registration ........................................................................... 12
5.2.2 Family ...................................................................................................... 14
5.2.3 secuENTRY Bridge & assignments ................................................ 17
5.2.4 Access codes ........................................................................................ 18
5.3 Video Bell ........................................................................................................... 20
5.3.1 Log in/ Registration ........................................................................... 21
5.3.2 Family ..................................................................................................... 23
5.3.3 Video Bell units & assignments ...................................................... 26
5.3.4 Video Bell display ................................................................................ 29
5.3.5 Firmware update ................................................................................ 30
5.3.6 Direct access button ......................................................................... 30
5.4 BURGcam .......................................................................................................... 30
5.4.1 Login / create an account ................................................................ 31
5.4.2 Family ...................................................................................................... 33
5.4.3 BURGcam units & assignments ...................................................... 36
5.4.4 BURGcam display ................................................................................ 39
5.4.5 Firmware update ................................................................................ 40
5.4.6 Direct access button ......................................................................... 40
5.5 eBoxx .................................................................................................................. 40
5.5.1 eBoxx settings ..................................................................................... 41
5.5.2 Account settings ................................................................................ 43
5.5.3 Direct access button ......................................................................... 48
5.6 Cong le PC software ................................................................................. 49
5.6.1 Import cong les ............................................................................. 49
5.6.2 Readout history .................................................................................. 50
5.6.3 Display history ..................................................................................... 50
5.6.4 Remove history ................................................................................... 51
5.6.5 Program lock ........................................................................................ 51
5.6.6 Remove cong les ........................................................................... 51
5.7 History ................................................................................................................ 52
5.7.1 Readout history ................................................................................... 52
5.7.2 Lock history ........................................................................................... 53
5.7.3 KeyApp history .................................................................................... 54
5.8 Firmware update ............................................................................................ 54
5.9 Settings .............................................................................................................. 55
5.9.1 Password ............................................................................................... 56
5.9.2 Administrator code ........................................................................... 56
5.9.3 I want to help ....................................................................................... 56
5.9.4 Info .......................................................................................................... 56
en
BURG-WÄCHTER UK LTD
Eurocam Technology Park
Chase Way, Bradford, West Yorkshire
England BD5 8 HW

2 I English secuENTRY KeyApp - iOS
2 I English secuENTRY KeyApp - iOS
Operating instructions
The KeyApp from BURG-WÄCHTER allows another option to open / lock locks of the secuENTRY series. In addition
to the unlocking media already known, such as Pincode, Fingerprint or Passive transponder, now there is also the
option of unlocking the lock per KeyApp using asmartphone. You can even open your locks via the Internet with our
secuENTRY 5670 Bridge module.
After the identication features of the app user are sent to the administrator or owner of the locking system, these
can be taken over in the user management of the exclusive secuENTRY PC software. The application can very easily be
stored as opening media for the respective locks. If required, the KeyApp can also be registered manually by scanning
in the QR code on the locks to which access should be permitted.
After the programming or manual registration of the locks, the respective locks can then be operated actively using the
smartphone.
In addition to this unlocking method, there is also the possibility to enable the KeyLess Entry function for individual
locks. For this purpose, aperiod can be dened for all locks registered in which an automatic unlocking takes place as
soon as the smartphone is in the detection range of the lock. The KeyLess Entry function is highly dependent on the
physical ambient conditions as well as the smart device used and the corresponding operating system version, mean-
ing access time may vary considerably.
The secuENTRY 5670 Bridge allows you to open your lock conveniently from along distance. An internet connection
is required for both the smart device and the bridge. It is also possible to allocate time-limited access codes. For
increased security, we use 2-factor authentication for allocating the access codes.
Additionalother devices such as the DOOR eGuard Video Bell DG8500 video intercom and the BURGcam LIGHT 3010
WLAN camera can be also integrated into the app. This enables functions such as the recording of photos or videos -
directly in the KeyApp. The KeyApp can also be used to set up the BURG-WÄCHTER eBoxx EASY+ parcel box. This means
you can open and congure the eBoxx, for example, and then use it to receive parcels.
The app was tested using Apple iPhone 4S, 5, 5S, 6, 6P, 6S, 6SP, 7 from iOS 8.1.3
Please check in the application description which other smart devices can be used with the application.
When entering the search term "secuENTRY" and / or "KeyApp" in the Apple App Store, you are taken directly to the
download area of the app. Here you can select and install the KeyApp.
You will be asked to read and conrm the licence
conditions when you open the KeyApp for the rst time
(see gure 1).
Then you are prompted to register the locking system at
the administrator. If you are the owner or administrator
of the locking system yourself, this could be your own
address. The administrator therefore has the overview of
the media with opening authorisation. Enter the respective
data for this purpose and select "Register".
Description 1. Download and install the secuENTRY KeyApp
2. Setting up the secuENTRY KeyApp
Fig. 1 Fig. 3
Fig. 1
Fig. 2
Install
Accept the terms
Select

English I 3secuENTRY KeyApp - iOS English I 3 secuENTRY KeyApp - iOS
Fig. 2
Fig. 3
Fig. 4
Fig. 6
Fig. 5
Fig. 7
If you already have aBW Cloud Account, you can login as usual. If you have specied that you do not want to use
the BW Cloud in the previous menu, you can still connect to this at alater time. In both cases, you can skip the
followingsteps.
Click on this button to access for
registration.
Choose apassword and enter it.
Press the button to receive
averication code per e-mail
Here, enter your rst name as well as last name and your
personal e-mail address (do not use any empty spaces!)
Enter the e-mail address of the locking system administrator here
Select whether you...
- wish to set up aBW Cloud account
- wish to receive automatic information about updates
- wish to receive the BW Newsletter
Read and accept the linked documents
Press "Complete" to register
Press the send button to send the
data to your administrator.
Enter the 6 digit verication code that
you have received per e-mail.
Press the button to
complete the registration
You have successfully
registered and logged in.
You can then choose whether you
want to send anonymised data to
BURG-WÄCHTER so that the KeyApp
can be improved. You can change your
decision later if you wish.
The KeyApp is now ready for use. For the full scope of the functions, a(one-o) authorisation must be issued.
This is queried when necessary.

4 I English secuENTRY KeyApp - iOS
4 I English secuENTRY KeyApp - iOS
3. How is alock registered in the secuENTRY KeyApp?
4. Open with the secuENTRY KeyApp
Fig. 1
Fig. 5
Fig. 3
Fig. 2
Fig. 6
Fig. 1Fig. 4
Press the Menu button
Press the "E-Key" button
Press the "Add" button
Enter the name for the
device and corresponding
administrator code. Press the
"START PROCESS" button.
The KeyApp is registered in
the lock after ashort period.
Press the "OK" button.
Press to open
Using the "GET ACCESS" button, now the lock can be
actuated. For this purpose, hold the smartphone in front
ofthe lock and press the button.
If the transmission is successful, you can then turn the
rotary knob of the lock respectively open your parcel box.
The 4 buttons that are arranged around the "GET ACCESS"
button can also be used to open locks.
For more information, see the chapter "Direct access buttons".
The "GET ACCESS" button opens the lock which has the
least distance to the smartphone.
Select "Register device"
The camera opens.
Scan the QR code of your device

English I 5secuENTRY KeyApp - iOS English I 5 secuENTRY KeyApp - iOS
5. Functions
Fig. 1
Fig. 3
Fig. 1
Fig. 2
Fig. 4
Fig. 2
Press the Menu button
Press the "E-Key" button
Press the "Add" button
Enter the name for the device
and corresponding administrator
code. Press the "START PROCESS"
button.
The KeyApp is registered in the
lock after ashort period. Press
the "OK" button.
This section gives you adescription of the various functions.
The E-Key menu contains functions for using secuENTRY prole cylinders.
Note: The "Manual registration" and the "Direct access buttons" can also be used for the BURG-WÄCHTER eBoxx EASY+
parcel box.
Manually registered locks and eBoxxes can be opened via the "GET ACCESS" button.
Select "Register device"
The camera opens.
Scan the QR code of your device
5.1secuENTRY E-Key
5.1.1 Manuel registration

6 I English secuENTRY KeyApp - iOS6 I English
Fig. 1
Fig. 1
Fig. 1 Fig. 2
Send the registration data of the app to the locking system administrator again.
Select "E-Key functions"
The KeyLess Entry function allows the locks assigned under "secuENTRY list" to be opened automatically without
having to press the "GET ACCESS" button again, or use another opening secret (Pincode, Fingerprint or Transponder).
For this purpose, under "secuENTRY list" you have to set which known locks should be opened in this manner. As soon
as the registered smartphone is within the area of detection, the lock is opened automatically.
Attention: the response time until releasing for opening the lock diers from smartphone to smartphone and cannot
be modied. The function also depends on the WLAN network as well as the hardware and software of the respective
manufacturer. The response time is independent of the app!
Press the send button to send the data
to your administrator.
Activate the function
The sub-functions
that appeared during
activation are described
on the following pages.
5.1.2 E-Key functions
5.1.2.1 Send again
5.1.2.2 KeyLess
secuENTRY KeyApp - iOS

English I 7secuENTRY KeyApp - iOS English I 7
Fig. 1 Fig. 1Fig. 2 Fig. 2
Fig. 3 Fig. 4Fig. 3
Activate the function
Select your own WLAN network
Press the button
Select the start time
Select the end time
Select the days
Swipe to the left
to delete atimer
Timer function
Add anew timer
Activate the function
Home WLAN detection:
Selection of the WLAN network that should be used for communication. After opening one time, the system is KeyLess
active for 3 minutes. Thus the lock opens automatically within 3 minutes as soon as it is within the reception range and
the system has been detected. Then the KeyLess function deactivates again.
Timer:
Under this menu, you can setup the time window where the KeyLess Entry is activated. Deviating from this time, the
KeyLess Entry function is inactive. If no timer has been dened, the KeyLess Entry function is active permanently with-
out time limitation.
Manual unlocking:
For manual unlocking, the lock must be opened one
time via the "GET ACCESS" button before the function
is activated. Then it remains active until the respective
smartphone has activated the KeyLess Entry function once
and the lock has been opened.
secuENTRY KeyApp - iOS

8 I English secuENTRY KeyApp - iOS8 I English
5.1.2.3 secuENTRY list
All known locks are displayed in the WHITE list. Here you can decide if the "KeyLess Entry" function should be activated
for each lock. The locks can also be renamed.
Activate KeyLess Entry:
Add lock
Rename lock Remove lock
Fig. 1
Fig. 3Fig. 2Fig. 1
Fig. 3Fig. 1
Fig. 4
Fig. 2Fig. 1
Fig. 2
Enter the name for the
device and corresponding
administrator code. Press
the "START PROCESS"
button.
The KeyApp is registered
in the lock after ashort
period. Press the "OK"
button.
Delete
Swipe to the left
The the camera opens.
Scan the QR code of
your device
Press the "Add"
button
Add anew lock
Activate the function
Swipe to the left Edit Save
Change lock
designation
secuENTRY KeyApp - iOS

English I 9secuENTRY KeyApp - iOS English I 9
5.1.2.4 Direct access buttons
The direct access buttons can be allocated in order to allow alock to be opened from the start screen.
New locks can also be added.
Assign direct access keys:
Fig. 2Fig. 1
Choose alock
Choose one of the buttons.
Then conrm with "OK"
As an alternative, adirect access
button that has not been assigned
on the start screen can be pressed to
open the menu.
Fig. 1
Add alock:
Fig. 3 Fig. 4
Fig. 2
Press the "Add" button
Enter the name for the device
and corresponding administrator
code. Press the "START PROCESS"
button.
The KeyApp is registered in the
lock after ashort period. Press
the "OK" button.
Add anew lock
The the camera opens. Scan the QR
code of your device
secuENTRY KeyApp - iOS

10 I English secuENTRY KeyApp - iOS10 I English
5.1.3 secuENTRY units
The direct access buttons can be allocated in order to allow alock to be opened from the start screen. New locks can
also be added.
This menu oers 3 functions. Set which locks should be
controlled via abridge, allocate buttons to the locks and
add new locks.
Activate the Bridge function:
Locks that are contacted via abridge are contacted by
WLAN instead of Bluetooth. As aresult, the opening takes
alittle longer, but you are able to open the lock from
everywhere as long as you have an internet connection.
Connect the keypad:
A lock can also be connected with akeypad in the app.
Fig. 1
Fig. 2
Select "eBoxx units".
Open using abridge
Fig. 3
Fig. 1
Fig. 4
Fig. 2
Press the "Add" button
When tapping on one of the
locks, you can see the keypads
logged onto the lock.
Fig. 2
The camera opens.
Scan the QR code of
your device
Allocate keypadSwipe to the left
secuENTRY KeyApp - iOS

English I 11secuENTRY KeyApp - iOS English I 11
5.2 secuENTRY Bridge
Locks that are contacted via abridge are contacted by WLAN instead of Bluetooth. As aresult, the opening takes alittle
longer, but you are able to open the lock from everywhere as long as you have an internet connection. Each bridge can
only be connected to one lock. Locks that are connected via one bridge can also be programmed via this, and receive
codes that have been entered via the keypad.
Add alock:
Remove lock:
Fig. 1 Fig. 2
Fig. 3
Press the Menu button
Press the "Bridge" button
Fig. 1 Fig. 3
Fig. 1
Fig. 4
Fig. 2
Enter the name for the device
and corresponding administrator
code. Press the "START PROCESS"
button.
The KeyApp is registered in the
lock after ashort period. Press
the "OK" button.
Swipe to the left to delete
Add anew lock
The camera opens.
Scan the QR code of
your device
Press the "Add"
button
secuENTRY KeyApp - iOS

12 I English secuENTRY KeyApp - iOS12 I English
5.2.1 Log in/ Registration
If you have made adecision for aCloud Account during setup and have not logged out since then, you can skip this
step. Otherwise you will have to login or create anew account.
Log in:
Log out:
Fig. 1
Fig. 1
Fig. 2
Enter your password and
press the button
You have successfully logged in.
Press this button
Fig. 4
Fig. 6
Fig. 5
Fig. 7
Click on this button to
access for registration.
Choose apassword and enter it.
Press the button to receive
averication code per e-mail
Enter the 6 digit verication code that
you have received per e-mail.
Press the button to complete the
registration
You have successfully
registered and logged in.
secuENTRY KeyApp - iOS

English I 13secuENTRY KeyApp - iOS English I 13
Change password: Recover password:
Fig. 1 Fig. 1
Fig. 3 Fig. 3
Fig. 2 Fig. 2
Fig. 4 Fig. 4
Enter the 6 digit verication code
that you have received per e-mail and
press the button.
Enter your email address
and press the button
Press this button
Press this button
Enter your new password.
Press the command button
Enter the 6 digit verication code
that you have received per e-mail and
press the button.
Press this button
Enter your new password.
Press the command button
secuENTRY KeyApp - iOS

14 I English secuENTRY KeyApp - iOS14 I English
Add family group:
Fig. 1
Fig. 1
Fig. 1
Fig. 3
Fig. 2
Fig. 2
Fig. 2
Enter family group name
Set family group as active
Add family group and press OK
Display family list
Add family group
Select family group
Select family group
5.2.2 Family
The Family functions make it easy for families to set up Bridges, BURGcams and Video Bells. The devices must be set up
just once by the family administrator. The administrator must then add afamily group and invite the rest of the family
members to it. Once the invitations have been accepted, the devices are available to all family members.
Activate family group:
If several family groups are entered, one of them must be marked as the currently active group. The active group is
displayed with the double tick. Access is available to the devices of the active family group.
Delete family group:
Family groups cannot be deleted. Only the connection between cloud accounts and family groups can be removed.
secuENTRY KeyApp - iOS

English I 15secuENTRY KeyApp - iOS English I 15
Fig. 3
Fig. 1
Fig. 4
Fig. 3Fig. 2
Swipe your own name to the left to
disconnect. The family group will then
no longer be displayed.
Display family list
Select family group
Add family members:
Family members can only be added by the family administrator.
Display family members:
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Display family list
Add family member
Name of the family member
Email address of the
family member
Send invitation and press OK
Select family group
secuENTRY KeyApp - iOS

16 I English secuENTRY KeyApp - iOS16 I English
An invitation that has been sent must rst be accepted by the other family member before this member becomes part
of the family group. Invitations that have not yet been accepted are marked with ayellow icon next to the name. These
steps must be performed on the invited family member's smartphone.
Remove family members:
Fig. 1
Fig. 1
Fig. 3
Fig. 2
Fig. 2
Fig. 4
Accept invitation
Click on the invitation
to the family group
Select family group
Swipe the name of the family member
to be removed to the left
Display family list
secuENTRY KeyApp - iOS

English I 17secuENTRY KeyApp - iOS English I 17
Fig. 1
Fig. 1
Fig. 3
Fig. 3
Fig. 2
Fig. 2
Add aBridge
Choose aBridge
Enter aname for the Bridge
Enter the password for
your WLAN network
Press this button
Search for locks nearby
View locks in the WHITE list
Choose alock
5.2.3 secuENTRY Bridge & assignments
Add secuENTRY Bridge:
Supply the secuENTRY Bridge with power by inserting the USB cable.
Keep the Reset button pressed for 5 seconds. The green LED starts to ash.
Allocate alock:
secuENTRY KeyApp - iOS

18 I English secuENTRY KeyApp - iOS18 I English
Fig. 1
Fig. 1 Fig. 1Fig. 3
Fig. 3Fig. 2
Fig. 2
Choose aBridge
Choose aBridge Swipe to the left
Show lock
Show lock
Swipe to the left
Display assigned locks: Remove Bridge:
Create an access code:
Remove assigned locks: 5.2.4 Access codes
Locks that are contacted per Bridge may also contain access codes limited by time. In doing so however, it is important
that these are also activated in the chronological order.
One-time access keys are also possible in the future.
Fig. 1 Fig. 2
Choose afunction
Create atime limited key
secuENTRY KeyApp - iOS

English I 19secuENTRY KeyApp - iOS English I 19
Fig. 4
Fig. 2
Fig. 2
Fig. 3
Fig. 1
Fig. 1
Fig. 6
Fig. 5
Enter the code or
have it generated
Enter the e-mail address
of the recipient
Enter the phone
number of the recipient
Continue
If necessary, add any
text or attachments
Continue
End date
Start date
Choose alock
Send
Send
Swipe to the left to open the menu
Administrator
code of the lock
The transmission is completed after ashort period and the lock recognises the Init Key and the access code. Conrm
with "OK". The Init Key must be entered once on the keypad belonging to the lock (enter 5 digits and press Enter) in
order to activate the access code. Then the lock can be opened using the access code.
For increased security, we use the 2-factor authentication. The access code is sent per e-mail, the Init Key in an SMS.
(Old) access codes can be deleted.
Share access code and Init Key:
Continue
Continue
secuENTRY KeyApp - iOS

20 I English secuENTRY KeyApp - iOS20 I English
Fig. 2
Fig. 1
Continue
Enter the administrator code
Delete the code
Choose alock
Delete an access code: 5.3 Video Bell
With aDOOR eGUARD Video Bell, you can see what your device sees using these functions. Communicate with the
other party via two-way audio. It is also possible to take photos/videos and open an assigned lock.
Fig. 2
Fig. 3
Fig. 1
Press the Menu button
Press the "Video Bell" button
secuENTRY KeyApp - iOS