Burnside 2G User manual
BURNSIDE 2G
GSM Fixed Wireless Phone
User Manual
Contents
1. Brief Instruction 2
1.1 Keys location 2
1.2 Keys description 3
2. Usage 4
2.1 Make a call 5
2.2 Receive a call 5
2.3 End a call 5
2.4 Reject the incoming call 5
2.5 Operations during the call 5
2.6 Hand free functions 5
2.7 Speed dial settings 5
3. Input Method 6
4. Hot dial mode 6
4.1 Setting the phone 6
4.2 Remote setting 7
4.3 Remote check number of calls 7
5. TechnicalSpecications 7
5.1 Working conditions 7
5.2 Technology parameters 8
6. Common problems and causes 8
7. Package contents 8
Thank you for buying a Burnside 2G GSM Fixed Wireless Phone, in order to
make the best use of your phone, please read the manual carefully.
Safety Instructions:
• Pleaseturnoanywirelessdevicewhenvisitingplacessuchasgas,oil
andchemicalfactories,andaroundinammableandexplosiveobjects
etc,whereitisnotpermittedtousewirelesstransmittingdevices.
• Please use slightly damp or anti-static dishcloth to clean the device. Do
notusechemicalcleanertocleanthesurface.Pleaseturnothephone
whencleaningthedevice.
• Do not expose the unit to the intense heat/sun.
• Donotconnectwithotherunmatcheddevice.
• Onlyusethe4.6V/1ApoweradapterandbatteriessuppliedbyBurnside.
Improperbatteryreplacementoruseofotherpowersupplydeviceswill
be dangerous.
• Pleasechargethetheunitfor12hoursbeforetherstuse.
TheBurnside2GGSMFixedWirelessPhoneallowsyoutomakethebest
useofthewirelessnetworkresources,andrealizethewirelessterminal
business communication.
This product meets the national standard indicators, the standards
ofimplementation:YD/T1626-2007xedwirelessphonetechnical
requirements and test methods.
Burnside 2G GSM Fixed Wireless Phone
1
1. Brief Instruction
1.1 Keys location
1. LCD
2.Lekey
3. OK
4. Send
5. M1
6. Numerical keys
7. M2
8. SMS
9. * Key
10. # Key
11. Hands free
12. Redial
13. M4
14. M2
15. ON/OFF
16. Direction key
17. Right key
18. Antenna
2
1.
2.
3.
4.
6.
5.
7.
8.
9.
10.
17.
16.
15.
14.
13.
12.
11.
18.
3
1.2 Keys description
Le key:
- In standby status, press the key to enter main menu;
- In menu status, press the key to enter the next sub-menu or the level
menu surface.
Right key:
- In on-hook status, press the key to enter the phonebook;
- In menu status, press the key to return to the last menu status, and main
function is to complete the exit function;
- In edit status, press the key to return to last menu;
- Inon-hookstatus,pressthekeytorejectthecomingcallwhencalling
(do not disturb function);
- In dialing or sending message status, press the key to delete the last
character.
On/O:
- In menu status, press the key to quickly exit to standby state;
- On-hookstate,pressthekeytorejectthecomingcallwhencalling
(do not disturb function);
- In the calling status, press the key to end the current calling and return to
standby status;
- Inostate,pressthekeyforsomeseconds,thephonewillenterboot
state.
- Inonstate,pressthekeyforsomeseconds,thephonewillenterclose/o
condition.
Numerical keys:
- Inon-hook,o-hookorhandsfreestatus,presstherelatedkeystodial
out the phone number;
- Ininputstate,inputthecorrespondingletteraccordingtodierentinput
methods.
Burnside 2G GSM Fixed Wireless Phone
4
# Key:
- Ininputstate,pressthekeytoentertheswitchbetweeninputmethods.
* Key:
- In input state, press the key to input the special symbol.
Send Key:
- Press a group of numbers, press the key to make a call.
Hands Free:
- No need to pick up the handset to dial, press the HF key for hands free
function.
M1-M4 keys:
- In standby status, press the key to dial the setting number directly.
2. Usage
Before putting into use, make sure the plug or battery is connected
correctly and the SIM card has been inserted correctly, once the phone has
been turned on, it is ready for use.
Warning: BeforepullingoutSIMcard,thephoneshouldbeturnedo.
InsertingorpullingoutSIMcardisstrictlyprohibitedwhenexternalpower
is connected; this may cause damage to your SIM card. Please avoid
touchingtheMetalsurfaceoftheSIMcardandplacetheSIMcardfaraway
from the electric and magnetic area to prevent the information in the SIM
card from being lost or damaged.
5
Burnside 2G GSM Fixed Wireless Phone
2.1 Make a call
1) In standby state, press the numerical key directly and press [Send] key
to dial out;
2) Pick up the handset or press[Hands Free] to get dial tone, then press the
numerical key and [Send] key to dial out;
3)Findyourwantedrecordsinthephonebook,calllog,orinbox,press
[Send] key to call out or select call in the menu;
2.2 Receive a call
When a call comes, pick up handset or press [HF] to receive the call;
2.3 End a call
1)Ino-hookcallingstatus,hangupthehandsettoendthecurrentcall;
2) In hands free calling status, press the [HF] key to end the current call.
3)Press[on/o]keytoendthecall.
2.4 Reject the incoming call
Whenacallcomes,press[on/o]keytorejectthecall.
2.5 Operations during the call
Volumeadjustment:Duringthecall,youcanpressUp/Downkeytoadjust
thevolumeofthehandsetorHF.Thesettingwillbesavedaer1second.
During the call, you can press the numerical keys to send out DTMF signal.
Alsoyoucanpresslekeytoentertheoptionandmakeoperations.
2.6 Hand free functions
Inthestandbystatus,pressHFkeytoenterhandfreemode,aerhearing
the dial tone, you can make a call.
2.7 Speed dial settings
1)M1-M4keysettings:youcansetspeeddialnumberfollowingthebelow
operations: Settings-Phone settings-Speed dial.
2) 2-9 numerical key settings: Phonebook-Speed dial, then you can set the
relevantphonenumberfor2-9numericalkeys.Aersetwell,pressthe
key for 3 seconds, you can call out the set numbers.
6
3. Input Method
There are many inputting methods: en, EN, Abc, abc, ABC,123 etc.
Press[#]key,youcanswitchinputtingmethods.
Press [*] key, you can input special symbols.
Press [0] key, you can input blank. (in the en, EN, Abc, abc, ABC input
method)
Press [0] to [9] key to input relevant letters or numbers; For example, the
numerical [2] key prints “A”, “B”, “C”, in the abc inputting method, press [2]
keyonce,itwilldisplay“a”;press[2]keytwice,itwilldisplay“b”;press[2]
keythreetimes,itwilldisplay“c”.
4. Hot dial mode
Thehotdialmodeallowsautomaticcallingtoapre-setnumberaer
the handset is picked up. The delay time and hot dial number can be set
(other unset numbers are forbidden to dial out).
Notice 1: The codes to remote change the hot dial number and check
thenumberofcalls,areonlyeectiveinthehotdialstatus.Ifthephone
receivesthetwocodesinthenormalstatus,itwouldbeconsideredasa
special message and deleted directly.
Notice 2: In order to disable the remote settings and checking number of
calls in the hot dial status, please make sure that there are free spaces in
theinboxbeforeswitchingtothehotdialstatus.Ifthemessagememory
isfullinthenormalstatus,pleaseeraseunwantedmessagesinstantly.
4.1 Setting by the phone
In the standby status, input *#131499#, input the phone code (the default
codeis1234),followingthetips,selectthehotdial,andthenyoucan
enter the hot dial status.
[Hot dial number]: you can set the hot dial number.
[Delay time]: you can set the dial delay time (The delay time is for the
periodaerpickingupthehandset).Themaximumdelaytimeis32
seconds; the default one is 3 seconds.
7
Burnside 2G GSM Fixed Wireless Phone
4.2 Remote settings
Send SMS to the hot dial phone from any mobile phones. The content is
SET*phone code*number#
For example, you send the order SET*1234*10086# to the hot dial phone;
thenpickingupthehandset,thephonewillcall10086automatically.
Notice: TheremotesettingscodeiseectiveonlyintheHotDialstatus;
if the phone code is incorrect, you cannot change the hot dial number
successfully.
4.3 Remote check the number of calls
Send SMS to the hot dial phone from any mobile phones. The content is
QUERY*phone code#. For example, you send the code QUERY*1234# to
theHotDialphone;thenthephonewillreplySMStothemobilephone
withthecontent“Thecurrentnumberofcallsis…”
Notice 1:Aerthephonereceivesacheckingcode;theaccumulated
numberofcallswillrevertbacktozero.
Notice 2:Thecheckingcodeiseectiveonlyinthehotdialstatus.
Notice 3: The number of calls only records the calls in the hot dial status,
and does not include the calls in the normal status.
5. Technical Specications
5.1 Working conditions
Environment Temperature: -10°C~+50°C
Humidity; 10%~95%RH
Air Pressure: 86kPa~106kPa
AmbientNoise: ≤60dB(A)
8
5.2 Technology parameters
FrequencyRange: EGSM900/DCS1800MHz/EGS850/PCS1900
CarrierSpacing: 200KHz
EmissionPower: 31dBm±2dB@900MHz,30dBm±2dB@1800MHz
30dBm±2dB@1900MHz,33dBm±2dBm@850MHz
Receiver Sensitivity: -104dBm
6. Common problems and causes
Malfunction Possible Cause
phenomenon
Can not turn on 1. Battery is not installed
2.Batteryislowpowerandpoweradapterdoesnot
connect
PINcodeerror 1.InsertwrongSIMcard
2.SIMcardhasbeenlocked,professionaloiceris
neededtoinitializethephone
“Fallline” 1.Batteryisweak
incommunication 2.Signalstrengthisweak
LowlevelVolume Undertalkingstatus,pressup/downkeytoadjust
volume
7. Package contents
1 x Phone base unit, 1 x Handset, 1 x Spiral cord, 1 x Antenna
1xPoweradapter,1xTheusermanual,1xBattery
Burnside 2G GSM Fixed Wireless Phone
Warranty:
Yourphoneisprotectedbywarrantyagainstfaultyworkmanshipandmaterialsforaperiodof18months
fromthedateofpurchase.Intheunlikelyeventthatafailureshouldoccur,thephonewillberepairedor
replacedfreeofchargewhenreturnedpostagepaidtotheaddressbelow,withinthe18monthwarranty.
Thiswarrantydoesnotcoverdamageorfailureresultingfrommisuse.Failuretocomplywiththe
warnings,careandsafetyadvicelistedinthisguidewillvoidthewarranty.Thiswarrantydoesnot
cover goods damaged in transit.
Yourstatutoryrightsareinnowayaectedbythiswarranty.
Burnside Technology Limited
Church Close Business Park, Todber,
Sturminster Newton, Dorset, DT10 1JH, England
Tel: +44 (0)1258 822518
Email: info@burnsidetelecom.com
Web: www.burnsidetelecom.com
Table of contents
