BushBaby BB4KWiFiBluRayPlayer User manual

1 Version 1.1
Bush Baby Blu-Ray Player with
4K Wi-Fi Hidden Camera
SKU: BB4KWiFiBluRayPlayer

2 Version 1.1
THANK YOU FOR PURCHASING THE
BB4KWIFIBLURAYPLAYER
Please read this manual before operating the
BB4KWiFiBluRayPlayer and keep it handy.
Your purchase should include:
1 x BB4KWiFiBluRayPlayer
1 x Blu-Ray Remote Control
1 x Manual for BB4KWiFiBluRayPlayer
1 x Manual for Blu-Ray Player
1 x 128GB MicroSD Card
1 x MicroSD Card Reader

3 Version 1.1
GET FAMILIAR WITH YOUR
BB4KWIFIBLURAYPLAYER HIDDEN CAMERA

4 Version 1.1
OPERATING THE BB4KWIFIBLURAYPLAYER
BEFORE YOU START
1. First you must download the LookCam app
from the Google Play Store or the iPhone
App Store.
oAndroid:
https://play.google.com/store/app
s/details?id=com.view.ppcs
oiPhone:
https://apps.apple.com/us/app/lo
okcam/id1460758870
2. If you wish to enable SD Card recording, you
must insert a MicroSD card into the unit. See
the image on page 3 to locate the MicroSD
Card slot.
3. If you ever need to move your device from
one network connection to a different one,
you will need to reset the device before
moving to the new network. Otherwise, the
device will not connect to the new network.

5 Version 1.1
Note: If you are not located in the US, or if you
intend to use this product anywhere other than the
US, you will need to purchase a converter in order to
use the AC wall plug in and avoid damaging the
product. Because different countries use different
voltages in their electrical wiring, you will need a
converter that adapts to the current in your
particular country.
IMPORTANT WARRANY INFORMATION: If the
warranty sticker on your device has been removed
or tampered with, your lifetime warranty will be
voided. You may be charged fees or denied a return
should this happen.
CONNECTING TO YOUR DEVICE DIRECTLY [PART 1]
In order to view your device remotely, you must
complete the following two-part sequence of steps.
1. Plug the device into the wall or insert
batteries.

6 Version 1.1
2. Turn on your phone’s Wi-Fi and wait up to 7
minutes for the device to generate a Wi-Fi
signal. The Wi-Fi Signal name will match the
UID on the sticker on the back of the device
(see page 3).
oYou will be looking in your Wi-Fi
settings for a network that looks like
GXXXXXXX.
3. Once the device generates its Wi-Fi signal,
connect to it via the Wi-Fi settings on your
phone.
NOTE: Some Android devices may produce a
warning that the network has no internet access. If
you see this, choose to connect to the network
anyway.
4. After connecting to the Wi-Fi Signal with
your mobile device, open the LookCam App.
NOTE: For iOS devices you must wait until the Wi-Fi
Signal appears next to your Phone Carrier Name in
the status bar at the top of your phone screen.
5. Once the app opens, tap the plus (+) button
at the top right of the app.

7 Version 1.1
6. Tap “ADD NEW ONLINE CAMERA”.
7. Tap on “ADD BY LAN”
8. Tap on the New Device and the camera will
be added to the app.
Note: The default password is 123456.
9. Now you will see the camera listed in the
home screen of the app and it will show
“Online”. You may now tap on this camera
entry to test the video feed.
NOTE: You will be prompted to change the device
password the first time you view the camera video
feed. We suggest that you do change this to prevent
any unauthorized viewing of your camera.
IMPORTANT: You must keep this password in a safe
place. If you ever need to access the camera from a
different phone or reinstall the camera app, this
password will be required to re-add the camera. If
you forget the password, a factory reset will be
required. In order to factory reset the device it will
most likely need to be sent to us via an RMA (return

8 Version 1.1
merchandise authorization). If you have any
questions regarding this, please call us.
HOW TO USE YOUR DEVICE AS A DVR UNIT
Your device can still record even without connecting
it to your home Wi-Fi network. You will not be able
to live-stream the feed if you choose to use the
device without connecting to your home Wi-Fi. The
device will only be paired to your smartphone, and
you will only be able to control and view it when
you are within its range.
1. If you have followed the steps for
“Connecting to Your Device Directly”, your
phone should already be paired to the
device.
2. You may still set up motion detection
recording (see page 11), and the device will
record to the inserted MicroSD card. You will
only be able to view the recordings once you
are back in range of the device.

9 Version 1.1
CONNECTING THE DEVICE TO YOUR WI-FI FOR
REMOTE VIEWING [PART 2]
If you would like to live-view your camera stream
from anywhere, you will need to complete this part
2 for connecting to your home Wi-Fi network.
1. From the home screen of the app, tap the
settings gear next to the camera name.
2. Next choose “WiFi Config”.
3. Select your network from the list of available
networks, and then enter your Wi-Fi
password and press OK.
4. A “Config successfully”message should
appear, and your device will reboot. You will
know it has successfully set when the
camera shows as Online in the home screen
of the app. This may take up to 5 minutes.
5. Once the device shows as Online, confirm
that it connected to your Wi-Fi successfully
by opening the settings app on your phone
and choosing your Wi-Fi settings. If you
connected successfully, the device will no
longer be generating its own Wi-Fi signal,

10 Version 1.1
and you should be connected to your own
Wi-Fi.
oNOTE: If you still see a network
broadcasting that is the named after
the UID on the back of your device,
connecting to your Wi-Fi has failed.
Please repeat steps 3-7 above and
pay careful attention to the network
password you entered.
6. The device is now connected to your Wi-Fi
and may be accessed from anywhere that
your phone has an internet connection.
HOW TO ADJUST THE VIDEO QUALITY OF THE
STREAM
1. Open the live video stream of your camera.
2. Once the video is streaming, tap the screen
once to reveal the options.
3. In the top right of the screen there will be a
video quality setting (4K, 2K, 1080P, and
720P). Choose the quality according to your
preference.

11 Version 1.1
HOW TO SET UP MOTION ALARM RECORDING
1. To set up the motion alarm, return to the
home screen of the app and tap the settings
gear next to your camera.
2. Tap “Alarm Config”.
3. Tap “Motion Detection Sensitivity” and set
according to your preference. (We suggest a
setting near the middle of the available
options.)
4. Tap OK at the bottom of the screen, and you
will receive notifications on your phone
when motion is detected.
5. To record when the alarm detects motion,
select “SD Card Setting” from the Settings
menu.
6. Tap the “Alarm Record”toggle so it is in the
on position, and tap the “Auto Record”to
the off position.
7. Tap OK at the bottom of your screen to save
your settings.

12 Version 1.1
oNOTE: You must have an SD Card
inserted into the device for this to
work. See the “Before You Start”
section for instructions.
RETRIEVE THE FILES TO YOUR PC
1. Remove the MicroSD Card from your device.
See page 3 to locate the MicroSD card slot.
2. Use the SD Card Reader to connect the
MicroSD card to your computer.
3. Locate “Removable Disk” inside the (My)
Computer folder.
AutoPlay Removable Disk > Open
folder to view files

13 Version 1.1
Or…
Go to Start > Computer > Removable Disk
4. Open the Removable Disk drive.

14 Version 1.1
5. Open the folder containing the files.
6. Double click the file you want to view.
Note: You can easily view, control, and delete your
MicroSD card recordings using the phone app.
If you are having video playback issues, such as a
completely black video recording or “squiggly lines”,
we recommend you use VLC media player to play
back the videos. It can be downloaded for free from
www.videolan.org
COPYING AND DELETING YOUR FILES
The video files created are just like any other file on
your computer, and can be managed in the exact
same manner.
To save a file, you want to select the
file, right click your mouse on the file
name, and then choose “Copy” from
the menu. Next, go the location you
want the save the file to. Right click
your mouse, and then chose “Paste.”

15 Version 1.1
This will copy the file to your
computer.
To delete a file, right click your
mouse on the file name and choose
“Delete” from the menu. You can
quickly select all of the files by
pressing “CTRL+A” on your keyboard.
If you are using MAC OS X, you must
empty the trashcan after you delete
a file. If this is not done, the SD card
will fill with hidden files, and the
device will no longer record new
files.

16 Version 1.1
TROUBLESHOOTING
THE DEVICE WON’T TURN ON
Make sure the device is plugged into an
electrical outlet, and the power cord is
plugged in all the way.
CANNOT RECORD TO SD CARD
Confirm you have inserted a MicroSD Card
into the unit.
CAN’T FIND DEVICE’S WIFI SIGNAL
Please unplug the device, wait 30 seconds,
plug your camera back in, and try again.
THE APP CANNOT FIND THE CAMERA AFTER
CHOOSING “SEARCH/LAN”
Ensure you are still connected to the
device’s Wi-Fi signal by going to your
phone’s Wi-Fi settings.
Please unplug the device, wait 30 seconds,
plug your camera back in, and try again.

17 Version 1.1
OTHER PROBLEMS
Call our technical support at 770–694–6921
SPECIFICATIONS
Video Resolution
4K
Streaming Resolution
4K, 2K, 1080P, 720P
Recording Resolution
720P
Video Format
.MP4
Type of Memory
External MicroSD Card
Memory Capacity
Up to 128GB
Recording Capacity
≈ 5 hours per 1GB
USB Interface
2.0 USB
Player Software
VLC
Time Date Stamp
Yes
Loop Recording
Yes
Operating Systems
Windows XP & Up
Mac OSX 10.5 & Up
Linux

18 Version 1.1

19 Version 1.1

20 Version 1.1
QUALITY CONTROL CHECKLIST
☐Blu-Ray Player Remote
☐Instruction Manual for Blu-Ray Player
☐Instruction Manual for BB4KWiFi
☐MicroSD Card Reader
☐BB4KWifi Blu-Ray Player
☐MicroSD Card ____GB
QC Tech Name:
_______________________________
Date: ______________________________