Bushnell Neo+ User manual

POWERED
BY
If you require further assistance, please review the support documents available online at www.bushnellgolf.com
Neo+Quick Start Guide
1. Power
2. SCREEN
3. Up/Down Arrows
4. OK/SHOT
5. ESC/MENU
The Bushnell Neo+is preloaded with over 16,000 golf courses and ready to use out of the box without
downloading any additional software. Within 45 days of rst use, you must go to iGolf.com to register
your Neo+, which will update the preloaded course information (see reverse for details). Registration is
free and takes only a few minutes. Follow the instructions below to start using your Neo+(after charging
it for 6 hours minimum, using the AC adapter and USB cable).
1. Hold down the Power button for approximately 2 seconds.
2. Move away from tall buildings and trees for an unobstructed
reception of GPS satellites. Wait for a GPS signal to be acquired
so that the course you are playing can be found automatically.
The initial GPS satellite signal lock can take up to 5 minutes. Select
‘Play Golf’ from the main menu.
3. Once the GPS signal has been acquired, a list of courses
near your location will be displayed. A manual search option is
available if a GPS signal has not been acquired.
4. Select the desired course.
5. The main GPS screen shows distances to the Front, Center and
Back of the green for each hole:
OK/SHOT button initiates the Shot Distance Calculator
UP and DOWN arrows switch between holes
SCREEN button displays custom points
ESC/MENU button opens the Play Menu
4
4
4
4
Lit#: 98-1637 / 06-10
1Get Accurate Distances in Minutes
1 2 3 4 5

POWERED
BY
If you require further assistance, please review the support documents available online at www.bushnellgolf.com
©2010 Bushnell Outdoor Products
Neo+Quick Start Guide
2Register Your Neo+and Update GPS Course Files
Complete the free iGolf.com registration to gain access to the latest course updates for use on your
device.
1. Using the provided cable, connect one end to the mini USB port on
the bottom of your Neo+and attach the other end to a USB port on
your computer.
2. Go to http://www.igolf.com, select ‘Join Now’ , enter the requested
information and select the ‘Join Now’ button to continue. Create your
iGolf.com prole and select the ‘Save’ button. While on the My Prole
page, select the ‘Sync Device’ button to register your Neo+.
3. Select‘GPS Courses’from the header menu, enter the name of a golf
course in the search bar, and select the ‘Search’ button.
4. Select the desired course from the results list to access the course
download page.
5. Select‘Download GPS & Scorecard’to download the selected course
les to your Neo+.
Once your Neo+has been registered, you may update the GPS data for an existing course or download a new
course to it at anytime. First make sure your Neo+is connected to the computer and that you are logged in to
your iGolf.com account. Then, simply repeat steps 3-5 to update/download other courses to your Neo+.