Busy Bee tools B3620 User manual

1
MODEL B3620
UNIVERSAL MOBILE WORKSHOP STAND
USER MANUAL

2
TABLE OF CONTENTS
Instructions.................................................................................................................................... 3
Assembly Instructions................................................................................................................... 4
Mobile Workstation Parts List.........................................................................................................8
Diagram..........................................................................................................................................9
Warranty........................................................................................................................................10

3
INTRODUCTION
SPECIFICATIONS
INVENTORY
TOOLS REQUIRED
FOR ASSEMBLY
The model B3620 Universal Mobile Workshop
Stand has been designed to provide a sturdy
work surface for mounting machinery and
equipment.
• Dimensions (Length x width x height) 20”L x
23”W x 30”H
• Maximum Weight Capacity 300lbs
• Estimated Assembly Time 25 to 30 minutes.
• Open-Ended Wrenches or sockets 13mm x 2
• Hex Wrench 5mm x 1
Description Qty
1. Tabletop……….………......…….......………..1
2. Shelf………….………….............….………....1
3. Side Panels….………..………..............……..2
4. Legs w/Foot Pads…..............……..................4
5. Tool Holder………………................................1
6. Upper Braces (Left & Right)………................2
7. Lower Braces…………….............….………..2
8. Linkage Bar/Pedal………….............…..…….1
9. Caster…………………............……….……...1
10.Upper Braces (Front & Back)…..............……2
11.PedalAssembly…….…..............…….............1
12.WheelAssembly…...............…………….…...1
13.Handle…………..............……………….……1
14.Hardware Bag (Not Pictured)
-Carriage Bolts M8-1.25 x 12……................30
-Button Cap head Screws
M8-1.25 x 16………..............……………...12
-Flat Head Screws M8-1.25 x 25...............….4
-Hex Bolts M8-1.25 x 20…..............……..…..2
-Hex Bolts M8-1.25 x 70…..............….……...1
-Lock Nuts M8-1.25…….............….…….......3
-Flange Nuts M8-1.25…………..…..........…38
-Extension Spring.....………......…..................1

4
ASSEMBLY
INSTRUCTIONS
1. Put together the side assembly by connecting
one of the front upper braces with two of the
legs using (4) M8-1.25 x 12 carriage bolts and
(4) M8-1.25 lock nuts. Check that legs are
Square before tightening the carriage bolts.
Use a 90° square when checking legs.
3. To build the second side assembly follow the
sameprocedureintherststep.
4. Now join the pedal assembly to the second
side assembly using (4) M8-1.25 x 16 button
cap head screws. Make sure the pedal is fac-
ing outwards.
2. Join the wheel assembly with side assem-
bly using (4) M8-1.25 x 16 button cap head
screws. The long linkage should be facing
outward with the wheels in the downward
position.

5
10. Turn workstation assembly upside down and
attach linkage bar to wheel assembly using
(1) M8-1.25 x 20 hex bolt and (1)M8-1.25 lock
nut loosely to allow movement. Connect ex-
tension spring to linkage bar and wheel
assembly.
9. Join the second side assembly with lower
braces using (2) M8-1.25 x 16 button cap
head screws and (2) M8-1.25 lock nuts.
8. Now join both of the side assemblies together
using (6) M8-1.25 x 12 carriage bolts and (6)
M8-1.25 lock nuts.
7. Nowattachthetwolowerbracestotherst
side assembly using (2) M8-1.25 x 16 Button
cap head screws and (2) M8-1.25 lock nuts.
6. Connectthe(2)upperbracesandshelftorst
side assembly using (6) M8-1.25 x 12 Car-
riage bolts and (6) M8-1.25 lock nuts.
5. Connect the caster to outward facing pedal
assembly with (1) M8-1.25 x 70 hex bolt and
(1) M8-1.25 lock nut.