BW Kent Series User manual

www.bwhomestyle.com Made in California
Installation Guide
Kent Series
BBF-208

Before you begin
Page:1
Please keep the box and packaging materials until your product is completely installed.
Before installing,
Read entire Bathroom Faucet installation instructions. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Contact Customer Service at
1-[phone]
. OR drop an email on [email protected]
We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures.
(Use standard equipment hoses for easy installation)
Thank you for the purchase of your new
Bluewater Homestyle plumbing fixture!
Tools Required
Channel Lock Pliers Flashlight
Safety Glasses
Screwdriver Adjustable Wrench
Bluewater Homestyle accepts no liability for any damage to the floor, walls, plumbing or for personal injury during installation.

The Bluewater Homestyle you have just purchased is designed to provide you with long lasting beauty
and dependability. To ensure your product's longevity, please follow the following care instructions.
When installing, we recommend you lay all parts on a soft cloth or towel to avoid scratching or
damaging the product. To care for your fitting, wipe with a clean, soft, damp cloth and blot dry as
often as possible. Never use abrasive cleansers, sponges, or acidic cleaning products as these may
damage the finish and may VOID THE WARRANTY.
Page:2
Bluewater Homestyle accepts no liability for any damage to the floor, walls, plumbing or for personal injury during installation.

Page:3
Bluewater Homestyle accepts no liability for any damage to the floor, walls, plumbing or for personal injury during installation.

• Take special care to protect all components during the construction and installation.
• Before removal of old faucet, always turn off water.
• Open the faucets to reduce water pressure and to insure that complete water shut off has been
accomplished.
• Before faucet installation, carefully f lush all water lines.
• After faucet installation, remove aerator and flush all water lines again.
FAILURE TO DO SO MAY DAMAGE INTERNAL PARTS!
FAILURE TO DO SO MAY DAMAGE INTERNAL PARTS!
• Plumber’s putty is not recommended. Use of caustic substances or acidic curing products for
installation purposes may harm the finish or cause the product to not function properly.
Please read the cautions printed on any product purchased for use during installation.
Cautions
Page:4
Bluewater Homestyle accepts no liability for any damage to the floor, walls, plumbing or for personal injury during installation.
Care and Maintenance
Valve Care
Your 1/4 turn ceramic valve will provide you a lifetime of service when cared for properly. The
most common valve problem is a result of debris in the water line, such as sand, silt, solder,
metal shavings, lime deposits or other foreign particles. Debris can become lodged between the
ceramic discs and result in improper functioning of the open and close action of the valve.
Particles can even cause cracks in the ceramic discs and render the cartridge useless.