Byhann BH-FW960PW User manual

SMART HOME WIFI CAMERA
USER MANUAL
BH-FW960PW
SHENZHEN BYHANN TECHNOLOGY CO.,LIMITED

CATALOGUE
Package Contents…………………………………………………………………1
Main Features………………………………………………………………………1
Technical Parameters……………………………………………………………1
Button Details……………………………………………………………………..3
How to connect WiFi camera………………………………………………..3
Smartlink……………………………………………………………………………………….………..5
For Wired connection…………………………………………………………….……………………6
For AP connection… ………………………………………………………………………….…….….6
How to Setup WiFi camera………………………………………………………………7
Part 1: to know the operation button………………………………………….…….………… 7
Part 2: Basic operation………………………………………………………….…….…………….. 8
Part 3: How to set up the system… ……………………………………………….….…………9
FAQ… ……………………………………………………………………………………….……………13

Package Contents
ByHann Smart Home Wifi Camera x1
Power Adapter with USB cable x1
Quick Installation Guide x1
Mounting Accessories
Screws Accessories
Main Features
Housing: Cute housing design, support rotation (PTZ)
Len: 960P High Definition lens with vivid image
Led: Build in light compensation IR Led, support night vision 30Feets
Support Wired network/ WIFI connection
Adapted H.264 video compression
Support remote access by mobile device(windows phone ,iPhone, Android, PAD)
Support TF Card ( Max 64G), Real time HD 960P video
Support motion detection, protection alarm, send message and email to phone
Technical Parameters
Features
Model:
BH-FW960PW
PNP
Plug and Play, easy operation
PC monitor
Internet Explorer 6.0 or higher version, Firefox, chrome
Phone
monitor
Support multi-channel monitor via smart phone
(for iphone, ipad, android phone, tablet pc)
IR-CUT
Built in IR-CUT, no color cast in day, clear image at night
Night vision
11pcs IR led lights, for night vision up to 30feets
WPS function
Support, 1 button of easy connect WIFI router
With TF card slot
Support Max. TF card 64GB
Alarms
Motion detection, E-mail alarm
Audio
Audio in
Build in 1pc MIC
Audio out
Build in 1pc HD speaker
Video
Compression
format
H.264 High Profile, MJPEG snapshot
Signal system
1/3” CMOS
Frame rate
30fps

Shutter speed
1/50s-1/100,000s
Resolution
1280*960
Image adjustment
Brightness, contrast, saturation.
WB, BLC
Auto
PTZ
Pan:355° , Tilt:120°
Reset button
Restore to factory default
Low Illumination
Color: 0.5Lux @(F1.2,AGC ON),0 LUX with IR
Black/White:0.05 Lux@(F1.2,AGC ON),0 LUX with IR
Shutter
1/50(1/60) second to 1/100,000 second
Lens
3.6 mm
Network
Network interface
RJ-45 10/100Mb self-adaptable Ethernet slot
Protocol
Support ONVIF, TCP/IP, HTTP, ICMP, DHCP, FTP, SMTP, PPPoE etc.
Wireless
WIFI,802.11 b/g
Online visitor
Support 4 visitors at the same time
IP mode
Dynamic IP address, static IP address, PPPOE
Alarm
Alarm Detection
Support motion detection
Alarm action
E-mail pictures /upload video by FTP/messages alarm
(coordinate to server)
Others
Use environment
indoor use
Power
DC 5V / 2A
Temperature
from -10~55
Humidity
10-90% RH
Device Size
92mm× 92mm× 123mm
Net weight
0.7lb
Attachment
Camera, bracket, Power adapter, manual, screws
System requireme
nt
Microsoft Win98 SE/ME/2000/XP,Vista,Win 7, Internet Explorer 8.0,
FireFox,Google Browser
Certificate
FCC CE Rohs

Button Details
How to connect camera to smart phone ?
Step 1: Connect power adaptor to your camera
Step 2: Download Yoosee APP to your phone or computer
1) Open www.yoosee.co to download. You can select Android, IOS or PC well.
2) For Smart phone, you can search “Yoosee”in smart phone APP store, or scan
your package box QR code as following:
For Android For IOS

Step 3: Install the APP and Register by Mobile or Email
Insert your phone number or email, then set up one password to login. Now you
own one Yoosee Account yet.
Step 4: Add device
1) Click the upper right “+”to add
2) It will show three optional. But the third type is to add NVR, not wifi camera.

For “Add new device”, usually recommend “Smartlink”:
Input your local WiFi password and click Next.

Camera will speak a prompt tone “Waiting to connect”.
After 20-30 seconds it will connect well. You can view the real time video now.
Notes: 1. Be patient to click Next when hear prompt tone, otherwise would cause
fail to connect;
2.If can not connect, click the Reset button 3 seconds until hear “Reset Successful”.
Then repeat the above steps. Or take out the power for a while, connect again. The
camera will auto turn pan or tilt. Then click Reset and repeat above steps.
For Wired connection
1) Connect the device’s internet access to the router’s LAN port using cable.
2) Click Next then add the “device list”. Make one name for your device. The default
device password is generally on the label at the bottom or back of the device.
3) Usually its default password is 123456. Finally click Save.
For AP connection
1) Power on, and the device is waiting to connect
2) Input your local wifi name and password, creating a visiting password.
3) Phone search the wifi “GW_IPC_*******” that emit by camera, which default
password is “12345678”. Open the Yoosee you can preview the video.

Notes: If fail to connect, maybe some latest smart phone, or firmware version
doesn’t support this AP connect; The device does not emit a beep for connection.
Please try to connect by Smartlink or Wired connect.
How to use the WiFi camera by phone?
Part 1: to know the operation button
1: To edit the camera name which show in your phone;
2: Show the device situation Online or Offline. Click the above screen you can view
real time video demo;
3: Red means the password is too simple. Click here you can modify this device
password;
4: Defense/Disarming setup. You can set up which period to defense;
5: Playback the video we record before;
6: Settings about Device info, Time setting, Security setting, Defense Settings etc;
7: Speaker on/off. When turn off we can not here the device voice;
8: Full or half screen to view the video;

9: Record the video;
10: Intercom button. Keep pressing to talk between phone and device, when release
button it means stop talking;
11: Capture the photo;
12: Defense/Disarming setup.
13: Position of device, it does not support yet.
The above button mainly under “Device”menu. Others:
Message: information from alarm inform, motion detect etc;
Image: the capture photo or video file;
My: Account info, System setting, About Yoosee, Exit account, software update etc;
Part 2: Basic operation
1. Real time video monitor. When connect well, click screen to view;
2. Pan/Tilt function. At the video screen click right/left the device will turn right/left;
when click up/down it will turn up/down. The Pan is max 355° and Tilt is max 120°;
3. SD/HD/LD: it means Standard demo/High Demo/Low demo. Click here you can
select which resolution you like. Usually device would adjust the resolution according
different network speed;

4. Intercom. Keep pressing the Intercom button for two way talk on line. When
release it stops at once;
5. Modify login password. Click My –Account information –Modify login password –
enter old and new password –Save.
Part 3: How to set up the system?
Device information.
Click here you can view Device ID, Device name, Firmware version, uBoot
version, Kernel version and System version;
Time settings.
If device default time is not correct you can amend it. Select the time zone
and your local time to confirm well;

Picture and sound.
There are four setting showing as below:
Video Format: you can select PAL or NTSC based on your local standard.
Volume: to adjust the voice higher or lower. For intercom/ alarm, it is helpful.
Motion detection: turn on/off. When “on”it will detect someone move and
alarm to us. When stranger break into your home, the camera can detect
this activity and remind you. Meanwhile, need to open relative alarm setup.
Reverse Image: if you install the device under ceiling, you can open this
feature to keep Pan and Tilt working normal in your phone.
Security Setting

Admin password: to modify device password by entering old and new password.
Visitor password: to share device to others but they can not modify the setting.
Note: If forget the password, Reset the device and login again. It will turn to
default password 123456.
Defense settings
Factory default setting is 24hours all days defense. If you just want to
monitor at some special period, select the exact time from xxxx to xxxx well.
Network settings
Default to connect WiFi signal nearby. If want to connect by Wired network
or another WiFi account, click here to amend.
Alarm settings

Usually all default setting is turn off. We can turn them on to receive alarm
prompt.
Alarm email: to receive the alarm message.
Buzzer: to alarm someone nearby the device.
Motion detection: when someone move within camera monitoring area, it
will send alarm message. Please open this feature in “Picture and sound”.
Record setting
Firstly need to input the Micro SD card to the camera. Max support 64Gb. It’s
better Class 10 speed of card.
Record manually: record the video by manual anytime.
Record alarm: just record the video when detect and alarm us.
Record timer: just record the video during period we setup.
Add sensor
This is optional feature to add extra alarm device, remote control etc. This
device do not support recently. If customer need this feature, please contact
seller to inquire more support.
Fireware update
If update new version, there is one red dot in the right. Click to update it well.
Note: do not break off during update, otherwise may cause damage.
That is all about the basic user manual of this device. Any wrong description,
questions or advice, welcome to contact us any time by mail [e-mail].
Thanks for your support.

FAQ
Q1: Why I can not connect my camera?
A1: Please check 1) power on with default adaptor 5V 2A. The indicator light in blue
mean it is at work. If you connect other adaptor 5V 1A, 12V 1A etc, it will cause
damage.
2) Camera will speak a prompt tone “Waiting to connect”. Then click Next when hear
prompt tone. Do not click Next if don’t hear it. Otherwise would cause fail to connect.
3) If still not connect, click the Reset button 3 seconds until hear “Reset Successful”.
Then repeat to connect. Or take out the power over 10 seconds, connect again. The
camera will auto turn pan or tilt. Then click Reset and repeat above steps.
Q2: What should I do if forget my password?
A2: Reset the camera and login the camera by default password 123456.
Q3: How to connect WiFi camera to Computer?
A3: 1)login www.yoosee.co to download CMS software;
2)Install it and operate by the Guideline data inside.
Q4: How to delete this camera from phone?
A4: when you are in the first video record page, click Device –press upon screen 3
seconds –will pop selection “delete”.
Q5: Why it delay some seconds when I use pan/tilt function by phone?
A5: For different internet speed, phone parameter, local WiFi signal situation, other
radio interference etc factors would effect the camera respond speed. Normally delay
some seconds is in normal.
Q6: How to get support if can not connect all the time or face quality
problem?
A6: You can contact us by the following info within 1year warranty:
Email: [e-mail]
Skype: ourskeeper
Cell phone: [phone]