6/ 14
2. The two WIDI Bud Pros units will pair via Bluetooth automatically, and
the blue LED will change from slow flashing to constant light (when
there is MIDI data sending, the LED light will flash dynamically).
⚫Connect WIDI Bud Pro with Bluetooth MIDI device
1. Turn on both the MIDI devices plugged with WIDI Bud Pro as well as
the Bluetooth MIDI devices.
2. WIDI Bud Pro will automatically pair with the Bluetooth MIDI device,
and the blue LED will change from slow flashing to constant light
(when there is MIDI data sending, the LED light will flash dynamically)
Note: If WIDI Bud Pro cannot automatically pair with another Bluetooth MIDI
device, it may be caused by a compatibility issue. In that case, please contact
CME for technical support.
⚫Connect WIDI Bud Pro with macOS X via Bluetooth
Video instruction: https://youtu.be/bKcTfR-d46A
1. Turn on the power of the MIDI device with the WIDI Bud Pro plugged
in, and confirm that the blue LED flashes slowly.
2. Click the [Apple icon] on the upper left corner of the screen, click the
[System Preferences] menu, click the [Bluetooth icon], and click
[Turn Bluetooth On], then exit the Bluetooth settings window.
3. Click the [Go] menu at the top of the screen, click [Utilities], and click
the [Audio MIDI Setup]
Note: If you don't see the MIDI Studio window, click the [Window] menu at the top
of the screen and click [Show MIDI Studio].
4. Click the [Bluetooth icon] at the upper right of the MIDI studio
window, find the WIDI Bud Pro that appears under the device name
