6:How to make Audio Output through our Converter:
(1) There have an 3.5mm Audio Cable attached in the DVI Male End of our Product,please
plug this cable into your input device’s 3.5mm Audio Jack,this is the First Step for you
to output sound through our Adapter.If you don’t follow this step,you would not
output sound through our Adapter’s 3.5mm Audio Jack.
(2) If your connect to Single Displays(HDMI or VGA or DVI)to output Signal,please connect
from our Adapter’s audio 3.5mm audio jack to your external speakers to output Sound
as well as Video.Please be well noted that even your HDMI Monitor with Audio output and
Speaker,you can only output audio through our 3.5mm audio jack to your Sound Device.
(3)If you connect to Multiple displays to output Signal ,Please connect from our Adapter’s
3.5mm audio jack to your external speakers to output sound.
3.0: Important Notes when you are using our Product.
1:In case insufficient Power when you are using our Product so displays can not
show normally,please connect micro USB from our Adapter to your USB Device to
power our Converter.
2:If you would like to output Corresponding resolution in your External
Displays,Please make sure that your Corresponding Cable,Monitor,Input Source
must have same or higher resolution than the Resolution you would like to
Output.It max supports to output 1920*1080@60Hz.
3:The DVI Male Port Connecting to your input Device is Type 24+1 ,it can be
compatible with your DVI Female Port 24+1 or 24+5 Type.
4:This Adapter supports to work at most three Displays Simultaneously,but please
be well noted that all your attached external displays can only have same view.
4.0: Package Contents
CableDeconn DVI 24+1 to VGA HDMI DVI 3IN1 Adapter With Micro USB Audio
3.5mm Audio Jack
1*Micro USB Cable
1*User Manual&Warranty Card
