9
TM
4 Notes on Safety:
ATTENTION! Only trained professionals are authorized to inspect the wall, as
well as install and remove the product! Among others, there is a risk of electric
shock, bruises, and crashes!
• Your CABSTONETM product is not a toy and is not meant for children, because it
contains small parts which can be swallowed and can injure when used inappropriately!
• NEVER place the display screen on its front side during installation, lean the display
screen against a wall or a sturdy surface. Placing the display screen on its front side
could cause permanent damage!
• Please install the system and devices attached to it in a way that persons cannot be
injured, or objects not be damaged for example by dropping.
• Please remove the packing materials, because children may cut themselves on them
while playing. Furthermore, there is a risk of swallowing and inhalation of incidentals and
insulating material.
• We recommend that the wall installation only be performed by qualied technicians.
• To avoid accidents it is necessary to check the wall structure before installation, or to
carefully look for a safe place for installation. Look out for live cables embedded in the
wall!
• The wall must be strong enough at the place of installation to carry at least the fourfold
of the total weight of the product, the audio / video devices, the bracket, and the
installation material.
• Please also read the Chapter “Specications”.
• The place of installation must be able to withstand earthquakes, or other strong
vibrations.
• Avoid places with high temperatures, or humidity, or places which might come into
contact with water.
• Do not install the product close to openings of air conditioners, or at places with an
excessive amount of dust or smoke.
• Install it only on a vertical wall. Avoid slant surfaces, because other kind of tensile stress
may then interact with the material.
• Do not install the product at places subject to vibration, or oscillation.
• Do not modify and alter any accessories! Make sure you also read the Chapter
“Warranty and Liability”. Do not use any damaged parts.
• Tighten all screws. Do not use too much force to avoid breakage of screws and
overturning of threads.
• Drill holes are still visible on the wall after the device bracket and the cable management
system is removed. After use for a longer time period, a spot may remain on the wall.
• Do not install the product at places subject to direct solar radiation, or strong light. This
will increasingly tire the eyes while looking at the display. Keep sufcient space around
the output devices, as well as audio / video devices, and around the entire system to
ensure proper ventilation and clearance, and to avoid damages.
• During transport, observe the details listed in the Chapter “Specications”, and imple
ment measures suitable for transport.
• For questions, defects, mechanical damages, malfunctions, and other functional
problems which cannot be resolved by this guide, please contact your dealer for repair or
replacement, as described in the Chapter “Warranty and Liability”.
• Please observe the maximum bearing loads listed in the Chapter “Specications”.
• Please also observe the terms of use described in the Chapter “Intended Use”.
• The supplied components are only suitable for installation to a solid stone and concrete
