CADDX CA-CAR25AHD/4 Mounting instructions

Use Manual FORAHD LPR Camera
Product Introduction
Thank you for using the AHD LPR Camera, which plate machine low light Sony CMOS,
newest ISP, high speed MCU, Support Four in one ：AHD CVI TVI CVBS. The day and
night can clearly capture the front and rear of the vehicle speed 120KM / h below grade.
Built-in 1.8-inch LCD screen, Support both English and Chinese,
1. Technical specification
Model
CA-CAR25AHD/ 4
Image Sensor
1/2.8” 2Megapixel progressive scan Sony Sensor
Max. White LEDs Length
6pcs white LEDS array/30m
Day/Night
Full Color
Focal Length
25mm
video
Four in one: AHD CVI TVI CVBS
Special function control board
Function control panel（With six buttons ）
Speed/ Ambient brightness/ White light lamp/ WDR four modes/ HLC four files
can be adjusted
Power Supply
DC12V/2a
Power Consumption
<11.5W (with IR on, motorized lens working)
Working Environment
-30°C~+60°C, Less than 95% RH
Ingress Protection
IP66
Dimensions
370mm × 145mm× 115mm
Weight
2.5kg
statement:
1.The contents of the manual may be described with a certain product that you are now using
subtle differences , a problem cannot be solved if you use this manual, please contact our
technical support department or product vendor.
2.This manual will be updated from time to time, the company has the right without prior
notice.

2: Internal structure
3.Installation guide
3.1:Installation of parking lots and roads, please refer to the following
illustration
3.2:The camera should be installed as the front body is tilted downwards, and the rear part is
upward, so as to effectively avoid zhe car's lights to reach the CDS which is at the end of the
camera, Otherwise, once the CDS effected by improper lights, it will lead zhe camera's LEDs
switch on and off continuously

4 Adjustment guide
4.1 Turn the camera tail buckle counterclockwise and open the camera cover. Before
you operate, read the camera's internal instructions panel carefully.
4.2 speed setting effect diagrams is as follows, please refer to
Low speed setting Right speed setting
4.3environment Brightness setting effect chart as follows, please refer to
Too high ambient brightness settings Right ambient brightness settings

4.4:lights results refer to the brightness setting. Is shown below
Light brightness is too bright Right Light brightness
4.5brightness setting renderings below, please refer to
WDR effect mode is set to a low Wide dynamic setting to Medium mode effect
4.6 Strong light suppression setting effect chart is as follows, please refer to
Strong light suppression is not turned Right strong light suppression
on or the level setting is too low

4.7 Default Parameters
Mode: Parking Speed: 30KM/h Scene bri: medium LED Light: Level 5
HSBLC: low WDR: medium
4.8 Four in one mode switching
Press the menu button vertically, enter the OSD menu, select the
second”exposure“, press the right-click button three times in a row,
And then enter the ”exposure“ submenu