Caidrox Y6T User manual

CAIDROX DASH CAM Y6T
Owner’s Manual

Table of Contents
Packing Contents...............................................................................1
Product Features...............................................................................1
Reset The Dash Cam...............................................................10
Videos and Photos on Your Computer............................................9
Deleting a Video or Photo............................................................9
Connecting the Device to Your Computer.....................................9
Viewing Videos and Pictures..........................................................9
Event Detection..............................................................................8
Taking a Picture........................................................................8
Saving a Video Recording..................................................................8
Dash Cam Recording...................................................................8
Turning Off the Device Manually..............................................7
Turning On the Device Manually................................................7
Setting the Camera Placement...................................................7
Installing and Setting Up the Dash Cam..........................................7
Installing the Mount onto Your Windshield......................................6
How To Set G-Sensor.................................................................5
How To Set Date/Time.......................................................................5
How To Format SD Card...................................................................5
Installing the Memory Card.............................................................2
Home Page Overview..................................................................4
Removing the Memory Card.......................................................2
Device Overview.................................................................................3
Display Overview................................................................................4
Frequently Asked Questions.......................................................11
Installation..........................................................................10
Warranty Request............................................................................12

1
MODE#: CAIDROX Y6T dash cam
Packing Contents:
Ÿ4" front dash cam
ŸHide rear camera
ŸAdjustable suction cup mount
ŸCar charger
ŸWire clip
ŸManual
Please check you have all parts in the box. Feel free to contact us for
refund/replacement should there be any part defective or missed.
Email us at: [e-mail]
Product Features:
Ÿ4 inch IPS touch display
ŸAutomatically starts recording when car is started
ŸInstant playback
ŸWide angle
ŸFull 1296P HD video
ŸSupports up to 64GB memory card
ŸNight vision recording
ŸMotion detection(optional)

2
Removing the Memory Card
2. Press it in until it clicks.
See the Important Safety and Product Information guide in the product box
for product warnings and other important information.
Installing the Memory Card
The camera requires a microSD™ or microSDHC memory card of up to 64GB
with a speed rating of class 10 or higher. You can purchase a compatible
memory card from an electronics supplier.
1 . Insert the memory card 1 into the slot .
NOTICE
Removing the memory card while the device is turned on can result in
a loss of data or damage to the device.
1 Turn off the device.
2 Press the card in until it clicks.
3 Release the card. The card ejects from the slot.

3
Device Overview
1
IPS
display
Touch to set the camera
2
MODE
1.While stop recording, press to change
video/photo/ playback mode.
2 While recording, press to lock current video.
3
UP
1.Select to scroll through menus or pages.
2.While stop recording, press to change front/
rear view
4
/ok
1. Select to choose an option in a menu.
2. Press to turn the device on.
3. Hold for 3 seconds to turn the device off
4.Press to start/stop recording
5
DOWN
1. Select to scroll through menus or pages.
2.On the photo mode, press to take photos
6
MENU
1.Press to go to setting menu
2.On the play back mode, press to lock/delete
files

4
Display Over View
1 – Record Icon. Click to start/stop recording
2 – Photo Icon. Click to taking photos
3 – Miro Phone Icon. Click to turn on/off micro phone
4 – Display View Icon. Click to change front view/ rear view
5 – Lock Icon. Click to lock/unlock current video
6 – Home Icon. Click to home page
Home Page Overview
123456
back to
record mode
taking
pictures turn on/off
micro phone
go to
playback
go to set
date/time
go to
set menu
turn off
screen

5
For the first use, please format the memory card first. When the device
started, it will start to record, click to stop recording, click home icon >
set icon, use down page icon/button to find “Format SD-Card”, click Format
SD-Card > Yes. Click icon back to home page.
When you finish, click OK icon. Then click icon to back to record mode
Setting G-Sensor
On the home page, click set icon, use the up and down icon/buttons to find “
Protect Level”. Once you have “ Protect Level” highlighted , click it. You will
see the levels that are available to select , you can select options by clicking
the option you want. It will change to you have selected.
number up
number down
next
previous

6
Installing the Mount onto Your Windshield
NOTICE
The suction cup mount is difficult to remove after it is installed. You should
carefully consider the mounting location before you install the mount. Before you
can install the mount onto your windshield, the ambient temperature must be
from 21° to 38°C (from 70° to 100°F).
TIP: You can connect the device to power and hold the device in the preferred
mounting location to check the camera's field of view at that location.
1. Clean the windshield using water or alcohol, and a lint-free cloth.
The windshield must be free of dust, wax, oils, or coatings.
2 .Remove the protective film from the mount.
3.Position the mount over the mounting location.
4.Press the mount firmly on, and turn to lock

7
Installing and Setting Up the Dash Cam
3. Route the power cable to your vehicle power outlet. The included
vehicle power cable is designed to be routed out of sight. It is long
enough to route around the windshield in most vehicles, and you can
hide the thin cable along or behind the trim or headliner.
4. Plug the other end of the vehicle power cable into a power outlet in
your vehicle.
5. If necessary, turn on the vehicle ignition switch to provide power to
the power outlet in your vehicle. The device turns on.
6. Follow the on-screen instructions to complete the initial device
setup. The camera view appears.
7 .Adjust the position of the camera to capture the desired field of
view.
Setting the Camera Placement
Mount the device in the center of your windshield. For the best
performance, you should on the driver's seat, turn on the dash cam,
adjust to find the best view in the vehicle.
Turning On the Device Manually
NOTE: When the device is connected to an ignition-switched
power outlet, it turns on automatically when you turn on the vehicle.
Press The device turns on.
Turning Off the Device Manually
NOTE: When the device is connected to an ignition-switched
power outlet, it turns off automatically when you turn off the vehicle.
Hold for 3 seconds. The device turns off.

8
Dash Cam Recording
NOTICE
Some jurisdictions regulate or prohibit use of this device. It is
your responsibility to know and comply with applicable laws and
rights to privacy in jurisdictions where you plan to use this
device.
The dash cam records video to the camera memory card (Installing
the Memory Card, page 2). By default, the device immediately starts
recording video when it turns on, and it continues recording until it is
turned off. If the memory card is full, the device automatically deletes
the oldest unsaved video to create space for new video.
You can save a video recording to prevent it from being
overwritten or deleted.
Saving a Video Recording
By default, the device uses a sensor to detect a possible incident and
saves video footage automatically before, during, and after the
detected event. You can also save video files manually at any time.
Click icon (lock/ unlock current file)
The device saves the video footage before, during, and after you
select. The memory card has limited storage. After you save a video
recording, you should transfer the recording to your computer or
other external storage location for permanent storage (Videos and
Photos on Your Computer).
Taking a Picture
You can take a picture with this device. From the viewfinder.
Click icon to stop recording, and then click icon . The device
saves the picture to the memory card.
Event Detection
By default, the device uses a sensor to detect possible incidents and
saves video footage automatically before, during, and after the
detected event. The video footage is stamped with the time and date
of the event.

9
NOTE: The device stops recording and alerts are disabled while viewing videos
or pictures.
Stop recording, click home icon , then click Movie Files icon
Connecting the Device to Your Computer
You can view videos and photos on your computer using a Card-
Reader.
1 Plug the memory card into your card reader
2 Plug the card reader USB end into a port on your computer.
Depending on your computer operating system, the device appears
as either a removable drive or a removable volume.
Deleting a Video or Photo
• While viewing a video, select > Delete > Yes.
• While viewing a photo, select > Yes.
Videos and Photos on Your Computer
NOTE: Some media players might not support high-resolution
playback.
Videos and photos are stored in the DCIM directory on the
camera memory card. Videos are stored in MP4 file format, and
photos are stored in JPG format. You can view and transfer
photos and videos by connecting the memory card or the device
to your computer.
The videos and photos are sorted into several folders.
EVENT: Contains videos saved automatically when the
device detects an incident.
PHOTO: Contains photos.
NORMAL: Contains videos saved manually by the user, and normal
videos both front and rear.
Viewing Videos and Pictures

10
Reset The Dash Cam
You can reset your device if it stops functioning.
Use a pin stick in the reset hole under the micro usb port.
Installation
To install your dash cam with a 12V power supply (cigarette lighter):
1. Using the 4m power cable provided, guide the cable around your
windscreen.
2. Tuck the cable neatly across the top of the windscreen and down the side to
keep the cable out of eyesight and tidier. In virtually all vehicles there is a
small gap between the roof lining and the windscreen, the Caidrox power
cable has been designed to push neatly into this gap.
3. Place the suction cup onto the windscreen, for most vehicles this will be just
behind the rear view mirror on the passenger side. If you have a black
“spotted” area on the windscreen please make sure that the mount is not
touching this. This location captures the best view of the road and the dash
cam remains safe and out of the line of sight.
If you need help, please email us at [e-mail]
Reset hole
car charger
rear cam
12V positive
lead of reversing lamp

11
Frequently Asked Questions
Q: My SD Card is not reading
A: The Dash Cam kit does not include the SD Memory card, CAIDROX Y6T
cash cam support SD card 64GB max, please use one high speed class 10
and over. If you are using a SD memory card, please make sure that is
inserted into the slot correctly. If you have checked to make sure that
the SD memory card is correctly inserted and it still won't read your
SD memory car you may need a standard size SD memory card. If
the issue keeps occurring please contact customer service.
Q: How can I change the menu settings?
A: You navigate through the settings menu with the up and down arrows. To
make a selection you will use the solid dot button on the top of the unit next
to the on/off button.You can also set up by touching the screen.
Q: How can I turn on the Motion Detection option?
A: You can turn this option on/off in the menu settings (please refer to
instructions above).
Q: How can I play back what I've recorded?
A: Turn your Dash Cam Y6T on. Once the screen turns on, stop recording,
then click the home icon, then movie files icon and you will see the
playback options displayed.
Q: Does the Dash Cam Y6T record video at night?
A: Yes, the Dash Cam Y6T features 6 built-in infrared LED lights which
allow it to record video at night.
Q: I have inserted the SD card it still says there is no media?
A: Turn off the dash cam and take the SD card out put them both back in
and power on the unit. If the issue keeps occurring please contact
customer service.

12
Q: How can I change to other language?
A: Turn the unit on, once the screen is up stop recording, click the
home icon, then set icon. Use the up and down icon/buttons to
navigate the menu. Once you have language highlighted , click
"language" You will see the languages that are available to select ,
you can select options by clicking the language you want. It will
change the language to the desired language you have selected.
Q: How long will my Dash Cam Y6T battery last once it is no longer
connected to the power cord?
A: Please make sure to use the included 5v/1A power adaptor to fully
charge the Dash Cam battery. Once the Dash Cam Y6T battery is fully
charged and disconnected from the power cord the unit should
function for at least 15-20 minutes.
Warranty Request
We are dedicated to providing you with responsive customer service and
complete satisfaction with our products. With all our dash cam products,
we provide a 30 day hassle-free return policy, as well as a 12 month
warranty which covers product malfunctions. Product malfunctions
covered by our warranty must not be caused by physical or liquid
damage. To extend your warranty from 12 months to 18 months,
please register your product with us.
If you haven’t already, please check our FAQ page before sending a
warranty request. If your issue could not be solved by FAQ answers,
please email us with information below and we will reach out to you as
soon as possible.
Order# 1
Mode# 1
Purchase date 1
Issue 1
Please send to [e-mail]