Calculated Industries 8509 User manual

Pocket
Reference
Guide
Model 8509
PRG8509E-B.indd 1 4/28/2010 10:10:55 AM

Po c k e t Re f e R e n c e Gu i d e — 3
Table of Contents
Key Definitions................................................3
Basic Function Keys.....................................3
Dimensional Unit Keys.................................3
Convert Key Functions.................................4
Memory ........................................................5
Entering Square or Cubic.............................6
Fractional Resolution....................................6
Project Keys.................................................6
Basic Dimensional Math.................................8
Linear Conversions......................................8
Square and Cubic Conversions...................8
Basic Dimensional Math...............................9
Project Examples —
Using Default Values.....................................10
Paint: Gallons, Quarts, or Pints..................10
Wallpaper: Rolls.........................................10
Tiles: Quantity .............................................11
Carpet: Length.............................................11
Concrete: Bags...........................................12
Finding the Cost of Materials.......................12
Cost of Concrete........................................12
Auto Shut-Off and Batteries.........................13
Reset..........................................................13
Auto Shut-Off..............................................13
Batteries.....................................................13
Repair and Return.........................................14
Repair and Return Information...................14
Warranty. ........................................................15
Warranty Repair Service: U.S.A.................15
Repair Service: Outside U.S.A...................15
Non-Warranty Repair Service: U.S.A.........16
Disclaimer...................................................17
FCC Class B...................................................18
Looking for New Ideas..................................18
Key Denitions
Basic Function Keys
oOn/Clear Key ─ turns power on.
Pressing once clears the display.
Pressing twice clears all
temporary values.
OOff ─ turns all power off, clearing
all non-permanent registers.
+ – x
÷ =
Arithmetic operation keys.
0– 9
and •
Digits used for keying in numbers.
%Percent (%) ─ four-function
(+, -, x, ÷) percent.
Dimensional Unit Keys
yYards Key ─ enters or converts to
yards.
fFeet Key ─ enters or converts to feet
as whole or decimal numbers. Also
used with the iand /keys for
entering feet-inch-fraction values (for
example, 6 f 9 i 1 / 2).
Repeated presses during conversions
toggle between feet-inch-fractions and
decimal feet. (cont'd)
PRG8509E-B.indd 2 4/28/2010 10:10:55 AM

Po c k e t Re f e R e n c e Gu i d e — 3
Table of Contents
Key Definitions................................................3
Basic Function Keys.....................................3
Dimensional Unit Keys.................................3
Convert Key Functions.................................4
Memory ........................................................5
Entering Square or Cubic.............................6
Fractional Resolution....................................6
Project Keys.................................................6
Basic Dimensional Math.................................8
Linear Conversions......................................8
Square and Cubic Conversions...................8
Basic Dimensional Math...............................9
Project Examples —
Using Default Values.....................................10
Paint: Gallons, Quarts, or Pints..................10
Wallpaper: Rolls.........................................10
Tiles: Quantity .............................................11
Carpet: Length.............................................11
Concrete: Bags...........................................12
Finding the Cost of Materials.......................12
Cost of Concrete........................................12
Auto Shut-Off and Batteries.........................13
Reset..........................................................13
Auto Shut-Off..............................................13
Batteries.....................................................13
Repair and Return.........................................14
Repair and Return Information...................14
Warranty. ........................................................15
Warranty Repair Service: U.S.A.................15
Repair Service: Outside U.S.A...................15
Non-Warranty Repair Service: U.S.A.........16
Disclaimer...................................................17
FCC Class B...................................................18
Looking for New Ideas..................................18
Key Denitions
Basic Function Keys
oOn/Clear Key ─ turns power on.
Pressing once clears the display.
Pressing twice clears all
temporary values.
OOff ─ turns all power off, clearing
all non-permanent registers.
+ – x
÷ =
Arithmetic operation keys.
0– 9
and •
Digits used for keying in numbers.
%Percent (%) ─ four-function
(+, -, x, ÷) percent.
Dimensional Unit Keys
yYards Key ─ enters or converts to
yards.
fFeet Key ─ enters or converts to feet
as whole or decimal numbers. Also
used with the iand /keys for
entering feet-inch-fraction values (for
example, 6 f 9 i 1 / 2).
Repeated presses during conversions
toggle between feet-inch-fractions and
decimal feet. (cont'd)
PRG8509E-B.indd 3 4/28/2010 10:10:55 AM

Po c k e t Re f e R e n c e Gu i d e — 5
iInch Key ─ enters or converts to
inches. Entry can be whole or decimal
number. Also used with the /key for
entering fractional inch values (for
example, 9 i 1 / 2). Repeated
presses during conversions toggle
between fractional and decimal
inches.
/Fraction Bar Key ─ used to enter
fractions. Fractions can be entered as
proper (1/2, 1/8, 1/16) or improper
(3/2, 9/8).
mMeter Key ─ enters or converts to
meters.
Convert Key Functions
ÇConvert Key ─ used with the
dimensional unit keys to convert
between dimensions, the
project keys to calculate
material quantities, or with other
keys to access special functions.
Ç – Change Sign (+/
- ) ─ toggles
displayed value to positive or
negative.
(cont'd) Ç ÷ Square Root (
√
¯
x) ─ finds
square root of value in display.
Ç x Value Squared (x2) ─ finds
square of value in display.
Ç % Pi (
π ) ─ constant 3.141593.
Memory
Ç + M+ ─ adds or stores a value in
the semi-permanent memory (for
example, 1 5 0 Ç +).
Semi-permanent means the
value is cleared when the
calculator is turned off.
Ç –
Ç +
M- ─ subtracts a value from the
semi-permanent memory
(for example, 1 5 0 Ç –
Ç + subtracts 150 from the
memory).
Ç = MR ─ recalls memory value (for
example, if 150 has been stored
in memory, pressing Ç = will
display 150).
Ç o MC ─ clears memory value.
PRG8509E-B.indd 4 4/28/2010 10:10:55 AM

Po c k e t Re f e R e n c e Gu i d e — 5
iInch Key ─ enters or converts to
inches. Entry can be whole or decimal
number. Also used with the /key for
entering fractional inch values (for
example, 9 i 1 / 2). Repeated
presses during conversions toggle
between fractional and decimal
inches.
/Fraction Bar Key ─ used to enter
fractions. Fractions can be entered as
proper (1/2, 1/8, 1/16) or improper
(3/2, 9/8).
mMeter Key ─ enters or converts to
meters.
Convert Key Functions
ÇConvert Key ─ used with the
dimensional unit keys to convert
between dimensions, the
project keys to calculate
material quantities, or with other
keys to access special functions.
Ç – Change Sign (+/
- ) ─ toggles
displayed value to positive or
negative.
(cont'd) Ç ÷ Square Root (
√
¯
x) ─ finds
square root of value in display.
Ç x Value Squared (x2) ─ finds
square of value in display.
Ç % Pi (
π ) ─ constant 3.141593.
Memory
Ç + M+ ─ adds or stores a value in
the semi-permanent memory (for
example, 1 5 0 Ç +).
Semi-permanent means the
value is cleared when the
calculator is turned off.
Ç –
Ç +
M- ─ subtracts a value from the
semi-permanent memory
(for example, 1 5 0 Ç –
Ç + subtracts 150 from the
memory).
Ç = MR ─ recalls memory value (for
example, if 150 has been stored
in memory, pressing Ç = will
display 150).
Ç o MC ─ clears memory value.
PRG8509E-B.indd 5 4/28/2010 10:10:55 AM

Po c k e t Re f e R e n c e Gu i d e — 7
Entering Square or Cubic
To label a dimension as “square” or “cubic,”
enter the value, then press the desired
dimension key twice for square and three
times for cubic. For example, to enter 25
cubic yards, press 2 5 y y y.
Fractional Resolution
Your calculator is set to display fractional
values to the nearest 16th of an inch
(default setting). Press Ç/to access
the fractional resolution setting. Repeated
presses of /then revolve through the
available settings: 1/16, 1/32, 1/64, 1/2, 1/4,
and 1/8. Press oto exit.
Project Keys
pPaint ─ calculates volume of paint,
based on an entered or calculated
area. Finds quantity in gallons,
quarts, or pints with repeated
presses.
wWallpaper ─ calculates number of
rolls of wallpaper, based on an
entered or calculated area.
tTile ─ finds the number of tiles,
based on an entered or calculated
area. Repeated presses scroll
between numbers of tiles for
various standard tile sizes (18″,
16″, 13″, 12″, 10″, 8″, 6″, 4″, 2″, 1″,
and 24″).
Tile sizes are shown in inches, not
square inches. In other words, a 6″
tile is really 6″ x 6″, or a 36 square-
inch tile, but it is labeled as a 6″
size.
cCarpet ─ calculates carpet length
required, based on entered or
calculated area. Repeated presses
of cscroll between values for
12′, 13′, and 15′ rolls.
CConcrete ─ calculates the number
of bags of concrete required,
based on an entered or calculated
volume (for example, cubic feet or
cubic yards).
Ç • Cost ─ allows you to calculate
total material cost.
PRG8509E-B.indd 6 4/28/2010 10:10:55 AM

Po c k e t Re f e R e n c e Gu i d e — 7
Entering Square or Cubic
To label a dimension as “square” or “cubic,”
enter the value, then press the desired
dimension key twice for square and three
times for cubic. For example, to enter 25
cubic yards, press 2 5 y y y.
Fractional Resolution
Your calculator is set to display fractional
values to the nearest 16th of an inch
(default setting). Press Ç/to access
the fractional resolution setting. Repeated
presses of /then revolve through the
available settings: 1/16, 1/32, 1/64, 1/2, 1/4,
and 1/8. Press oto exit.
Project Keys
pPaint ─ calculates volume of paint,
based on an entered or calculated
area. Finds quantity in gallons,
quarts, or pints with repeated
presses.
wWallpaper ─ calculates number of
rolls of wallpaper, based on an
entered or calculated area.
tTile ─ finds the number of tiles,
based on an entered or calculated
area. Repeated presses scroll
between numbers of tiles for
various standard tile sizes (18″,
16″, 13″, 12″, 10″, 8″, 6″, 4″, 2″, 1″,
and 24″).
Tile sizes are shown in inches, not
square inches. In other words, a 6″
tile is really 6″ x 6″, or a 36 square-
inch tile, but it is labeled as a 6″
size.
cCarpet ─ calculates carpet length
required, based on entered or
calculated area. Repeated presses
of cscroll between values for
12′, 13′, and 15′ rolls.
CConcrete ─ calculates the number
of bags of concrete required,
based on an entered or calculated
volume (for example, cubic feet or
cubic yards).
Ç • Cost ─ allows you to calculate
total material cost.
PRG8509E-B.indd 7 4/28/2010 10:10:55 AM

Po c k e t Re f e R e n c e Gu i d e — 9
Basic Dimensional Math
Linear Conversions
Convert 15 feet 9-1/16 inches to other units
of measure.
KEYSTROKE DISPLAY
o0.
1 5 f 9 i 1 / 1 6
15 f e e t 9-1/16 i n c h
Ç f 15.75521 f e e t
Ç i 189.0625 i n c h
Ç y 5.251736 y d
Ç m 4.802187 m
Convert 14.793 decimal inches to fractional
inches.
KEYSTROKE DISPLAY
o0.
1 4 • 7 9 3 i 14.793 i n c h
Ç i 14-13/16 i n c h
Square and Cubic Conversions
Convert 25 square feet to other square
dimensions.
KEYSTROKE DISPLAY
o0.
2 5 f f 25. s q f e e t
Ç y 2.777778 s q y d
Ç m 2.322576 s q m(cont'd)
Convert 25 cubic feet to cubic yards.
KEYSTROKE DISPLAY
o0.
2 5 f f f 25. c u f e e t
Ç y 0.925926 c u y d
Basic Dimensional Math
KEYSTROKE DISPLAY
o0.
Adding dimensions:
1 0 i + 2 f
5 i = 3 f e e t 3 i n c h
Subtracting dimensions:
5 f –
1 i 3 / 4 = 4 f e e t 10-1/4 i n c h
Dividing dimensions:
1 0 f ÷
1 i 1 / 4 = 96.
Multiplying dimensions/waste factor
allowance:
1 5 0 f f +
1 0 % 165. s q f e e t
Finding area/square feet:
2 f x
1 f 2 i = 2.333333 s q f e e t
PRG8509E-B.indd 8 4/28/2010 10:10:55 AM

Po c k e t Re f e R e n c e Gu i d e — 9
Basic Dimensional Math
Linear Conversions
Convert 15 feet 9-1/16 inches to other units
of measure.
KEYSTROKE DISPLAY
o0.
1 5 f 9 i 1 / 1 6
15 f e e t 9-1/16 i n c h
Ç f 15.75521 f e e t
Ç i 189.0625 i n c h
Ç y 5.251736 y d
Ç m 4.802187 m
Convert 14.793 decimal inches to fractional
inches.
KEYSTROKE DISPLAY
o0.
1 4 • 7 9 3 i 14.793 i n c h
Ç i 14-13/16 i n c h
Square and Cubic Conversions
Convert 25 square feet to other square
dimensions.
KEYSTROKE DISPLAY
o0.
2 5 f f 25. s q f e e t
Ç y 2.777778 s q y d
Ç m 2.322576 s q m(cont'd)
Convert 25 cubic feet to cubic yards.
KEYSTROKE DISPLAY
o0.
2 5 f f f 25. c u f e e t
Ç y 0.925926 c u y d
Basic Dimensional Math
KEYSTROKE DISPLAY
o0.
Adding dimensions:
1 0 i + 2 f
5 i = 3 f e e t 3 i n c h
Subtracting dimensions:
5 f –
1 i 3 / 4 = 4 f e e t 10-1/4 i n c h
Dividing dimensions:
1 0 f ÷
1 i 1 / 4 = 96.
Multiplying dimensions/waste factor
allowance:
1 5 0 f f +
1 0 % 165. s q f e e t
Finding area/square feet:
2 f x
1 f 2 i = 2.333333 s q f e e t
PRG8509E-B.indd 9 4/28/2010 10:10:55 AM

Po c k e t Re f e R e n c e Gu i d e — 11
Finding volume/cubic feet:
5 f x 1 • 5
f x 2 i = 1.25 c u f e e t
Project Examples —
Using Default Values
Paint: Gallons, Quarts, or Pints
How many quarts of paint do you need to
cover a wall measuring 12′ x 8′? How many
pints? How many gallons?
KEYSTROKE DISPLAY
o0.
1 2 f x 8 f = 96. s q f e e t
p1.10 q t
p2.19 pt
p0.27 g l
Wallpaper: Rolls
Find the number of wallpaper rolls needed
for a wall measuring 8′ x 12′.
KEYSTROKE DISPLAY
o0.
8 f x 1 2 f = 96. s q f e e t
w1.71 r o l l
Tiles: Quantity
How many tiles do you need to cover a floor
measuring 10′ x 15′? Find the number of
tiles in various sizes. Also, add a 10% waste
allowance, in case you need extra tile.
After converting to tile, press the
tkey until you reach the desired
tile size. The DIY Project Calculator
For Dummies lists 11 of the most
popular tile sizes.
KEYSTROKE DISPLAY
o0.
1 0 f x 1 5 f = 150. s q f e e t
+ 1 0 % 165. s q f e e t
t73.33 t i l e (18 in)
t92.81 t i l e (16 in)
Continuous presses of tdisplay the num-
ber of tiles for the following additional sizes:
18″, 16″, 13″, 12″, 10″, 8″, 6″, 4″, 2″, 1″, 24″.
Carpet: Length
Find the quantity of carpet needed to cover
a floor that measures 12′ 6″ x 10′ in area.
KEYSTROKE DISPLAY
o0.
1 2 f 6 i
x 1 0 f = 125. s q f e e t
(cont'd)
KEYSTROKE DISPLAY
PRG8509E-B.indd 10 4/28/2010 10:10:55 AM

Po c k e t Re f e R e n c e Gu i d e — 11
Finding volume/cubic feet:
5 f x 1 • 5
f x 2 i = 1.25 c u f e e t
Project Examples —
Using Default Values
Paint: Gallons, Quarts, or Pints
How many quarts of paint do you need to
cover a wall measuring 12′ x 8′? How many
pints? How many gallons?
KEYSTROKE DISPLAY
o0.
1 2 f x 8 f = 96. s q f e e t
p1.10 q t
p2.19 pt
p0.27 g l
Wallpaper: Rolls
Find the number of wallpaper rolls needed
for a wall measuring 8′ x 12′.
KEYSTROKE DISPLAY
o0.
8 f x 1 2 f = 96. s q f e e t
w1.71 r o l l
Tiles: Quantity
How many tiles do you need to cover a floor
measuring 10′ x 15′? Find the number of
tiles in various sizes. Also, add a 10% waste
allowance, in case you need extra tile.
After converting to tile, press the
tkey until you reach the desired
tile size. The DIY Project Calculator
For Dummies lists 11 of the most
popular tile sizes.
KEYSTROKE DISPLAY
o0.
1 0 f x 1 5 f = 150. s q f e e t
+ 1 0 % 165. s q f e e t
t73.33 t i l e (18 in)
t92.81 t i l e (16 in)
Continuous presses of tdisplay the num-
ber of tiles for the following additional sizes:
18″, 16″, 13″, 12″, 10″, 8″, 6″, 4″, 2″, 1″, 24″.
Carpet: Length
Find the quantity of carpet needed to cover
a floor that measures 12′ 6″ x 10′ in area.
KEYSTROKE DISPLAY
o0.
1 2 f 6 i
x 1 0 f = 125. s q f e e t
(cont'd)
KEYSTROKE DISPLAY
PRG8509E-B.indd 11 4/28/2010 10:10:56 AM

Po c k e t Re f e R e n c e Gu i d e — 13
KEYSTROKE DISPLAY
c13.89 s q y d
c10.42 f e e t (12 ftr o l l )
c9.62 f e e t (13 ftr o l l )
c8.33 f e e t (15 ftr o l l )
Concrete: Bags
Find the number of bags of concrete for a
patio measuring 9′ x 15′ x 4″.
KEYSTROKE DISPLAY
o0.
9 f x 1 5 f
x 4 i = 45. c u f e e t
C67.50 b a g
Finding the Cost
of Materials
Cost of Concrete
How much does 216 cubic feet of concrete
cost, if the cost per cubic yard is quoted at
$50?
KEYSTROKE DISPLAY
o0.
2 1 6 f f f 216. c u f e e t
Ç y 8. c u y d
x 5 0 Ç • (Cost) 400.00
(Cost = approx. $400)
(cont'd) Auto Shut-Off and Batteries
Reset
If your calculator should ever “lock up,”
press reset — a small hole located above
the Ckey/upper right. Use the end of a
paper clip to press the button.
Auto Shut-Off
After 8 to 12 minutes of non-use.
Batteries
Batteries Included: Two LR-43 batteries.
Battery Life: 575 hours of actual use.
To replace the batteries, use a small
Phillip’s head screwdriver and unscrew the
single screw in the center of the battery
door, located on the back of the calculator.
Carefully remove the battery
door, remove the old batteries
from the clips, and replace
them with two new LR-43
batteries. Make sure the
positive sides (+) are facing up.
Replace the battery door and
reattach the screw.
PRG8509E-B.indd 12 4/28/2010 10:10:56 AM

Po c k e t Re f e R e n c e Gu i d e — 13
KEYSTROKE DISPLAY
c13.89 s q y d
c10.42 f e e t (12 ftr o l l )
c9.62 f e e t (13 ftr o l l )
c8.33 f e e t (15 ftr o l l )
Concrete: Bags
Find the number of bags of concrete for a
patio measuring 9′ x 15′ x 4″.
KEYSTROKE DISPLAY
o0.
9 f x 1 5 f
x 4 i = 45. c u f e e t
C67.50 b a g
Finding the Cost
of Materials
Cost of Concrete
How much does 216 cubic feet of concrete
cost, if the cost per cubic yard is quoted at
$50?
KEYSTROKE DISPLAY
o0.
2 1 6 f f f 216. c u f e e t
Ç y 8. c u y d
x 5 0 Ç • (Cost) 400.00
(Cost = approx. $400)
(cont'd) Auto Shut-Off and Batteries
Reset
If your calculator should ever “lock up,”
press reset — a small hole located above
the Ckey/upper right. Use the end of a
paper clip to press the button.
Auto Shut-Off
After 8 to 12 minutes of non-use.
Batteries
Batteries Included: Two LR-43 batteries.
Battery Life: 575 hours of actual use.
To replace the batteries, use a small
Phillip’s head screwdriver and unscrew the
single screw in the center of the battery
door, located on the back of the calculator.
Carefully remove the battery
door, remove the old batteries
from the clips, and replace
them with two new LR-43
batteries. Make sure the
positive sides (+) are facing up.
Replace the battery door and
reattach the screw.
PRG8509E-B.indd 13 4/28/2010 10:10:56 AM

Po c k e t Re f e R e n c e Gu i d e — 15
Repair and Return
Repair and Return Information
Return Guidelines:
Please read the warranty in this1. User’s Guide to determine if your
Calculated Industries product remains
under warranty before calling or
returning any device for evaluation or
repairs.
If your product won’t turn on, check2. the batteries as outlined in the User’s
Guide.
If you need more assistance, please3. go to the following Web site:
www.calculated.com/warranty.
If you believe you need to return your4. product, please call a Calculated
Industries representative between the
hours of 7:00 a.m. and 4:30 p.m.
Pacific Time for additional information
and a Return Merchandise
Authorization (RMA).
Call toll free: 1-800-854-8075
Outside U.S.A.: 1-775-885-4900
Warranty
Warranty Repair Service: U.S.A.
Calculated Industries (CI) warrants this
product against defects in materials and
workmanship for a period of one (1) year
from the date of original consumer
purchase in the U.S. If a defect exists
during the warranty period, CI, at its
discretion, will either repair (using new or
remanufactured parts) or replace (with a
new or remanufactured unit) the product
at no charge.
THE WARRANTY WILL NOT APPLY TO
THE PRODUCT IF IT HAS BEEN
DAMAGED BY MISUSE, ALTERATION,
ACCIDENT, IMPROPER HANDLING OR
OPERATION, OR IF UNAUTHORIZED
REPAIRS ARE ATTEMPTED OR MADE.
SOME EXAMPLES OF DAMAGES NOT
COVERED BY WARRANTY INCLUDE,
BUT ARE NOT LIMITED TO, BATTERY
LEAKAGE, BENDING, A
“BLACK INK SPOT” OR VISIBLE
CRACKING OF THE LCD, WHICH ARE
PRESUMED TO BE DAMAGES
RESULTING FROM MISUSE OR ABUSE.
(cont'd)
PRG8509E-B.indd 14 4/28/2010 10:10:56 AM

Po c k e t Re f e R e n c e Gu i d e — 15
Repair and Return
Repair and Return Information
Return Guidelines:
Please read the warranty in this1. User’s Guide to determine if your
Calculated Industries product remains
under warranty before calling or
returning any device for evaluation or
repairs.
If your product won’t turn on, check2. the batteries as outlined in the User’s
Guide.
If you need more assistance, please3. go to the following Web site:
www.calculated.com/warranty.
If you believe you need to return your4. product, please call a Calculated
Industries representative between the
hours of 7:00 a.m. and 4:30 p.m.
Pacific Time for additional information
and a Return Merchandise
Authorization (RMA).
Call toll free: 1-800-854-8075
Outside U.S.A.: 1-775-885-4900
Warranty
Warranty Repair Service: U.S.A.
Calculated Industries (CI) warrants this
product against defects in materials and
workmanship for a period of one (1) year
from the date of original consumer
purchase in the U.S. If a defect exists
during the warranty period, CI, at its
discretion, will either repair (using new or
remanufactured parts) or replace (with a
new or remanufactured unit) the product
at no charge.
THE WARRANTY WILL NOT APPLY TO
THE PRODUCT IF IT HAS BEEN
DAMAGED BY MISUSE, ALTERATION,
ACCIDENT, IMPROPER HANDLING OR
OPERATION, OR IF UNAUTHORIZED
REPAIRS ARE ATTEMPTED OR MADE.
SOME EXAMPLES OF DAMAGES NOT
COVERED BY WARRANTY INCLUDE,
BUT ARE NOT LIMITED TO, BATTERY
LEAKAGE, BENDING, A
“BLACK INK SPOT” OR VISIBLE
CRACKING OF THE LCD, WHICH ARE
PRESUMED TO BE DAMAGES
RESULTING FROM MISUSE OR ABUSE.
(cont'd)
PRG8509E-B.indd 15 4/28/2010 10:10:56 AM

Po c k e t Re f e R e n c e Gu i d e — 17
To obtain warranty service in the U.S.,
please visit www.calculated.com/warranty.
A repaired or replacement product
assumes the remaining warranty of the
original product or 90 days, whichever is
longer.
Non-Warranty Repair Service:
U.S.A.
Non-warranty repair covers service beyond
the warranty period or service requested
due to damage resulting from misuse or
abuse. Contact Calculated Industries to
obtain current product repair information
and charges. Repairs are guaranteed for 90
days. Call toll free: 1-800-854-8075
Outside USA: 1-775-885-4900
Repair Service – Outside the U.S.A.
To obtain warranty or non-warranty repair
service for goods purchased outside the
U.S., contact the dealer through which you
initially purchased the product. If you
cannot reasonably have the product
repaired in your area, you may contact CI
to obtain current product repair information
and charges, including freight and duties.
Disclaimer
CI MAKES NO WARRANTY OR
REPRESENTATION, EITHER EXPRESS
OR IMPLIED, WITH RESPECT TO THE
PRODUCT’S QUALITY, PERFORMANCE,
MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE. AS A RESULT,
THIS PRODUCT, INCLUDING BUT NOT
LIMITED TO, KEYSTROKE
PROCEDURES, MATHEMATICAL
ACCURACY, AND PREPROGRAMMED
MATERIAL, IS SOLD “AS IS,” AND YOU
THE PURCHASER ASSUME THE ENTIRE
RISK AS TO ITS QUALITY AND
PERFORMANCE.
IN NO EVENT WILL CI BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM ANY
DEFECT IN THE PRODUCT OR ITS
DOCUMENTATION.
The warranty, disclaimer, and remedies set
forth above are exclusive and replace all
others, oral or written, expressed or implied.
No CI dealer, agent, or employee is
authorized to make any modification,
extension, or addition to this warranty.
(cont'd)
(cont'd)
PRG8509E-B.indd 16 4/28/2010 10:10:56 AM

Po c k e t Re f e R e n c e Gu i d e — 17
To obtain warranty service in the U.S.,
please visit www.calculated.com/warranty.
A repaired or replacement product
assumes the remaining warranty of the
original product or 90 days, whichever is
longer.
Non-Warranty Repair Service:
U.S.A.
Non-warranty repair covers service beyond
the warranty period or service requested
due to damage resulting from misuse or
abuse. Contact Calculated Industries to
obtain current product repair information
and charges. Repairs are guaranteed for 90
days. Call toll free: 1-800-854-8075
Outside USA: 1-775-885-4900
Repair Service – Outside the U.S.A.
To obtain warranty or non-warranty repair
service for goods purchased outside the
U.S., contact the dealer through which you
initially purchased the product. If you
cannot reasonably have the product
repaired in your area, you may contact CI
to obtain current product repair information
and charges, including freight and duties.
Disclaimer
CI MAKES NO WARRANTY OR
REPRESENTATION, EITHER EXPRESS
OR IMPLIED, WITH RESPECT TO THE
PRODUCT’S QUALITY, PERFORMANCE,
MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE. AS A RESULT,
THIS PRODUCT, INCLUDING BUT NOT
LIMITED TO, KEYSTROKE
PROCEDURES, MATHEMATICAL
ACCURACY, AND PREPROGRAMMED
MATERIAL, IS SOLD “AS IS,” AND YOU
THE PURCHASER ASSUME THE ENTIRE
RISK AS TO ITS QUALITY AND
PERFORMANCE.
IN NO EVENT WILL CI BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM ANY
DEFECT IN THE PRODUCT OR ITS
DOCUMENTATION.
The warranty, disclaimer, and remedies set
forth above are exclusive and replace all
others, oral or written, expressed or implied.
No CI dealer, agent, or employee is
authorized to make any modification,
extension, or addition to this warranty.
(cont'd)
(cont'd)
PRG8509E-B.indd 17 4/28/2010 10:10:56 AM

Po c k e t Re f e R e n c e Gu i d e — 19
Some states do not allow the exclusion or
limitation of implied warranties or liability for
incidental or consequential damages, so
the above limitation or exclusion may not
apply to you. This warranty gives you
specific rights, and you may also have
other rights, which vary from state to state.
FCC Class B
This equipment has been certified to
comply with the limits for a Class B
computing device, pursuant to Subpart J
of Part 15 of FCC rules.
Looking for New Ideas
Calculated Industries, a leading
manufacturer of special-function calculators
and digital measuring instruments, is
always looking for new product ideas in
these areas.
If you have a new product idea, please visit
our "Bright Idea" page at www.calculated.
com/brightidea.asp. For suggestions about
improving this product or other products,
please visit us at www.calculated.com
under "Contact Us." Thank you.
(cont'd) Software copyrighted and licensed to
Calculated Industries, by Construction
Master Technologies, LLC, 2010.
Pocket Reference Guide copyrighted by
Calculated Industries, 2010.
ProjectCalc® and
Calculated Industries® are registered
trademarks of Calculated Industries, Inc.
ALL RIGHTS RESERVED
Designed in the U.S.A.
U.S. Patent 6,721,623
Printed in China
3/10
PRG8509E-B
PRG8509E-B.indd 18 4/28/2010 10:10:56 AM

Po c k e t Re f e R e n c e Gu i d e — 19
Some states do not allow the exclusion or
limitation of implied warranties or liability for
incidental or consequential damages, so
the above limitation or exclusion may not
apply to you. This warranty gives you
specific rights, and you may also have
other rights, which vary from state to state.
FCC Class B
This equipment has been certified to
comply with the limits for a Class B
computing device, pursuant to Subpart J
of Part 15 of FCC rules.
Looking for New Ideas
Calculated Industries, a leading
manufacturer of special-function calculators
and digital measuring instruments, is
always looking for new product ideas in
these areas.
If you have a new product idea, please visit
our "Bright Idea" page at www.calculated.
com/brightidea.asp. For suggestions about
improving this product or other products,
please visit us at www.calculated.com
under "Contact Us." Thank you.
(cont'd) Software copyrighted and licensed to
Calculated Industries, by Construction
Master Technologies, LLC, 2010.
Pocket Reference Guide copyrighted by
Calculated Industries, 2010.
ProjectCalc® and
Calculated Industries® are registered
trademarks of Calculated Industries, Inc.
ALL RIGHTS RESERVED
Designed in the U.S.A.
U.S. Patent 6,721,623
Printed in China
3/10
PRG8509E-B
PRG8509E-B.indd 19 4/28/2010 10:10:56 AM

PRG8509E-B.indd 20 4/28/2010 10:10:56 AM