Calculated Industries Measure Master 4018 User manual

M EASURE M ASTER 5
™
MODEL 4018
Feet-Inch-Fraction and Metric Calculator
Get professional results every time with this handy and easy-to-
use tool for projects involving measurements! Work and convert in
all dimensional formats including feet-inches-fractions, decimal
feet, decimal inches, inches, fractions, yards, meters, centimeters
and millimeters, as well as areas and volumes. The Measure
Master 5 is ideal for faster, more accurate material estimates.
Quickly solve circumference, circle area and arcs. Use it at home
or in the shop for on-the-spot calculations for all your projects —
saving you time and money!
Model 4018
Easy-to-use with upgraded features, the
Measure Master 5 meets the challenge for fast,
accurate solutions in the office or on the job-
site. Carry it in your tool box or briefcase.
4018-SPEC-4C-1_06
4840 Hytech Drive
Carson City, NV 89706
1-775-885-4900
Fax: [phone]
Visit our website at:
www.calculated.com
Dimensional Math for Craftsmen, Fabricators and Design Professionals
Dimensional Math and Conversions;
Feet-Inch-Fractions and Metric
Area and Volume Calculations;
Easily find Square and Cubic Values
Instant Circle Solutions;
Solve Area, Circumference, Diameter
Material Estimation and More!
Quickly calculate material costs
Product Specifications — Measure Master 5 Model 4018
Size: 5.5" x 2.9" x 0.5" (140mm x 73.7mm x 12.7mm)
Weight: 3.2 oz. (90.7 gm) does not include Case or User’s Guide
Power: One (1) 3-Volt Lithium (CR-2032) Battery
Display: 11 Digits (7 normal, 4 fractions) with Full Annunciators
LCD Dimensions: 0.67" x 2.44" (17mm x 62mm)
Accuracy: 12 Digit Internal Accuracy
Included with Every Measure Master 5:
Easy-to-follow English/Spanish User’s Guides; Protective Armadillo Gear® Case and Long-life Battery.
Full One-Year Limited Warranty:
All Calculated Industries calculators and electronic tools are covered by a Full One-Year Limited Warranty
against defects in materials and workmanship. The full text of each warranty is published in the documen-
tation accompanying each product and at www.calculated.com. Calculated Industries reserves the right to
make changes in the materials and specifications of products without notice.
• Designers
• Craftsmen
• Tradespersons
• Fabricators
• Woodworkers
• Technicians
Measure Master 5 is the choice for:
•Saves time…dimensions and meas-
urements are entered with no conver-
sions required, no special keystrokes
or routines to learn.
•Accurate…eliminates reliance on
error-prone hand calculations.
•Measurement conversions and other
calculation-intensive solutions are
nearly automatic.

Dimensional Math and Conversions 4050 4018
Feet-Inch-Fraction, Inch Fraction, Yards UU
Decimal Feet (10ths, 100ths), Decimal Inches UU
Preset Fractions (1/2" through 1/64") UU
D:M:S, Decimal Degree Entry and Conversions v
Full Metrics (m, cm, mm) UU
Right Angle Solutions
Complete Right Angle/Rafter Calculations U
Pitch Key (Slope and Grade) U
Rise, Run, Diagonal/Common Rafters U
Hip/Valley Key U
Jack Rafters Key U
Irregular Hip/Valley and Jacks U
Stair Layout Key U
Diagonal Key U
Expanded Rake-Wall U
Area and Volume Solutions
Square and Cubic UU
Basic Circular Calculations UU
Weight per Volume Conversions UU
Special Functions
Board Feet UU
Works as a Regular Calculator (~,!,@,#, +/–, %, π, 1/x, x2, √—
2)UU
User-Definable Preferences ● v
Entry Editing Backspace Key ● v
Cost per Unit (Total costs based on unit price) UU
Additional Capabilities and Characteristics
Paperless Tape UU
Number of Memories 14
m, cm, mm — Calculations
in Metric dimensions
Yds, Feet, Inch, / — Work in
Yards, Feet, Inches, Fractions
Tape — Paperless Tape;
review last 20 entries
Conv — Perform
conversions; access
secondary functions
Stor/Prefs — Store and set
preferences for Fractions,
Area, Volume, Metric
decimal display
Weight per Volume —
Used for Weight and
Volume Conversions
BdFt — Calculates
Board Feet
Basic Arc Functions —
Arc°, Chord, Segment and
Arc Area, Segment Height
Circ — Circular
Calculations including Area,
Circumference, Diameter
Backspace Key —
Easily edit entries
Easy-to-use for Fast, Accurate Construction-Math Solutions
MEASURE MASTER 5
™
MODEL 4018
Feet-Inch-Fraction and Metric Calculator
DESIGNERS • TRADESPERSONS • WOODWORKERS • CRAFTSMEN
FABRICATORS • TECHNICIANS
Dedicated Keys and Functions Make It Easy To Use
M
EASURE
M
ASTER
5
C
ONSTRUCTION
M
ASTER
5
Compare
Calculator Features:
Measure Master 5™ is a trademark, Armadillo Gear® and Calculated Industries®
are registered trademarks of Calculated Industries, Inc. © 2006. All rights reserved.
v = New or Enhanced Features/Functions
4018-SPEC-4C-1_06
Includes Free
Armadillo Gear®
Protective Hard Case
Shock absorbing, ergonomic,
soft-grip case with a tough 360°
flip-top hard cover.