Caliber HWC 502 User manual

SmartHome

Instruction manual for
HWC 502
Click to jump to
The pictures/screenshots/illustrations used in this manual are subject to change without notication. Also they may dier in appearance, depending on the device
you use, iOs or Android, tablet or phone etc. Product and software update periodically, the number and app interface in this manual are only shown as an example.
No extra notication on further changes.
Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome

3. Microphone
6. Reset
2. IR LED
5. Button
4. Status Light
9. Speaker
10. SD car slot
8. External
power port
7. Mini USB
1. Camera
The pictures/screenshots/illustrations used in this manual are subject to change without notication. Also they may dier in appearance, depending on the device
you use, iOs or Android, tablet or phone etc. Product and software update periodically, the number and app interface in this manual are only shown as an example.
No extra notication on further changes.
What's in the box
Consult the checklist below for all components.
Bell 5C
3M Manual
Pin
Screw(3 kinds)
A x 2 B x 2
Bracket
Angle Wall Mount
Chime kit
C x 1
Screwdriver
1. Camera
- 1080p
2. IR led
For night vision
3. Microphone
2 way talk back
4. Status Light
- LED will blink rapidly in RED
while searching for a
new connection
- LED will blink rapidly in BLUE
while reconnecting
- LED will be solid RED while
restarting
- LED will be solid BLUE while
ON and connected
5. Button
To ring the bell
6. Reset button
To reset to factory settings
7. Micro USB slot
Alternative power source 5V DC
8. External power port
8-16V AC
9. Speaker
10. micro SD card slot
max. 128GB
Please keep network available
Note: Make sure the camera to be within range of the Wi-Fi network to
ensure a successful connection between the camera and router.
Supported network: Wi-Fi 2.4GHz only
Overview
Click to jump to
Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 1 Download and install Caliber Smart Home app
Use your phone to scan the QR code below or search“Caliber Smart Home” in the app
Store or Google play to download and install the app

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 2 Register / Login / Request password
Register
Setup an account for ‘Caliber Smart Home’ , or sign-in if you already have an account.
1. Tap “Register” in the lower center ”img 1”
2. The system automatically determines your country / area. You can also select your
country code by yourself.
Enter the cellphone number / E-mail and tap“Obtain verification code”“img 2”
note: Change to “register by phone” for using a phone number to register.
3. Enter the verification code you received “img 3”. If you didn’t received the verification
code within 30min. please try the previous step again
4. Choose a password for your account “img 4”, tap ”Completed” to finish your
registration.
img 1 img 2 img 3 img 4

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 2 Register / Login / Request password
Account+password sign-in
1. The system will automatically determine your
country / area or you could select manually
2. Enter your registered cellphone number or
email and password, sign in to the system

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 2 Register / Login / Request password
Forgot password
If you forgot your account of“Caliber Smart Home”, you can reset the account password
by “Forgot password”
1. Tap “Forgot password”, as shown in “img 1”
2. The system automatically determines your country / area. You can also select your
country code by yourself. Enter the cellphone number/E-mail and tap “Obtain
verification code”, as shown in “img 3”
3. Enter the verification code you received “img 3”. If you didn’t received the verification
code within 30min. please try the previous step again.
4. Choose a password for your account “img 4”, tap ”Completed” to finish your
registration.
img 2 img 3 img 4img 1

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 3 Doorbell Installation
1. Mark screws position 2. Nail expansion screw 3. Fix bracket
4. Install the doorbell into
the bracket
5. Install the doorbell into the bracket
Fix it with the C screw
Doorbell Installation
Doorbell Installation Angle Mount
AC 12V~24V
1. Mark screws position 2. Nail expansion screw 3. Fit the mounting bracket to
the angle wall mount
4. Fix bracket 5. Install the doorbell into
the bracket
6. Angle mounted
Fix it with the C screw
AC 12V~24V

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 3 Doorbell Installation
1. Mark screws position 2. Nail expansion screw 3. Fix bracket
4. Install the doorbell into
the bracket
5. Install the doorbell into the bracket
Fix it with the C screw
Doorbell Installation
Doorbell Installation Angle Mount
AC 12V~24V
1. Mark screws position 2. Nail expansion screw 3. Fit the mounting bracket to
the angle wall mount
4. Fix bracket 5. Install the doorbell into
the bracket
6. Angle mounted
Fix it with the C screw
AC 12V~24V

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 3 ADD device
1. Go to the app, tap “+”in the upper right of
this page to add device’s as shown in the
picture to the left.
2. In this case, select “Doorbell camera”
3. Please make sure the device’s indicator light
flashes quickly, tap “Next step” to continue.
4. Enter your WiFi-password
5. Next the app will show a QR code. Hold it in
front of the camera lens until the doorbell-
camera makes the confirming sound.
6. When successfully added, you can rename the
camera and choose where it’s located
7. Choose your chime setup

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 3 Install Chime
Connecting the HWC502 doorbell camera.
In most cases there will be a doorbell adapter 8-16V AC already in the house. The
diagram below shows what it looks like:
Curren/Old situation
Original Mechanical Chime
When the button is pressed, the bell rings
Mechanical Chime
Doorbell
Button
Mechanical Chime
(Phone app)
Chime adapter
Doorbell
HWC502
New situation
1. Leave all the original wiring in tact
2. Replace the ‘Doorbell button’ with the HWC502 doorbell
3. Add the wiring of the ‘Chime Adapter’ to the wiring on the excisting
‘Mechanical Chime’. One wire added to the ‘+’ and one to the ‘-’
4. Make sure the ‘Bell Settings’ in the app is set to ‘Mechanical’
Now when the HWC502 doorbell is pressed; the HWC502 makes a ringing sound,
your phone receives a ‘call’ and the original ‘Mechanical Chime’ rings
Original Transformer (not incl, already installed)
230V AC => 8-16V AC
Original Transformer
(not incl, already installed)
230V AC => 8-16V AC
HWC 502 Chime adapter
AC input: 4-16 V
Batch Nr.: 319145
CALIBER EUROPE BV
Kortakker 10 • 4264 AE Veen • The Netherlands
1. Current / old situation
2. NEW situation
(4)

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 3 Install Chime
Connecting a mechanical chime.
If you still want the chime to“ring”or “ding dong”like before, please install as described
below:
Curren/Old situation
Original Mechanical Chime
When the button is pressed, the bell rings
Mechanical Chime
Doorbell
Button
Mechanical Chime
(Phone app)
Chime adapter
Doorbell
HWC502
New situation
1. Leave all the original wiring in tact
2. Replace the ‘Doorbell button’ with the HWC502 doorbell
3. Add the wiring of the ‘Chime Adapter’ to the wiring on the excisting
‘Mechanical Chime’. One wire added to the ‘+’ and one to the ‘-’
4. Make sure the ‘Bell Settings’ in the app is set to ‘Mechanical’
Now when the HWC502 doorbell is pressed; the HWC502 makes a ringing sound,
your phone receives a ‘call’ and the original ‘Mechanical Chime’ rings
Original Transformer (not incl, already installed)
230V AC => 8-16V AC
Original Transformer
(not incl, already installed)
230V AC => 8-16V AC
HWC 502 Chime adapter
AC input: 4-16 V
Batch Nr.: 319145
CALIBER EUROPE BV
Kortakker 1 0 • 4264 AE Veen • The Netherlands
1. Current / old situation
2. NEW situation
(4)

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 3 Install Chime
Connecting HWC502 with no extra chime
No extra Chime
When the button is pressed, the HWC502 rings
on your phone and a sound is heard from the
camera’s speaker
Doorbell
HWC502
Doorbell
HWC502
Wireless
Digital Chime
HWC501CH
USB powered 5V DC
Digital Chime
1. Replace the ‘Doorbell button’ with the HWC502 doorbell
2. Remove the wiring from the ‘Mechanical Chime’ (if one was installed)
3. Make sure the ‘Bell Settings’ in the app is set to ‘Digital’
App>Homescreen>HWC502> >Bell Settings>Digital
4. Make sure the indicator LED on the HWC501CH blinks (Press reset once)
4. Connect the Chime in the app
App>Homescreen>HWC502> >Bell Settings(2nd)>Digital
Tap ‘Bind’
Now when the HWC502 doorbell is pressed; the HWC502 makes a ringing sound,
your phone receives a ‘call’ and the ‘HWC501CH Digital Chime’ rings
Original Transformer
(not incl, already installed)
230V AC => 8-16V AC
Original Transformer
(not incl, already installed)
230V AC => 8-16V AC
3. No extra Chime
4. Digital Chime
(Phone app)
(3)
(4)
(Phone app)
(Phone app)

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 3 Install Chime
Connecting a digital chime.
If you want a chime to“ring”or “ding dong”on any location within the WiFi range, please
install as described below. The HWC501CH is sold separately:
No extra Chime
When the button is pressed, the HWC502 rings
on your phone and a sound is heard from the
camera’s speaker
Doorbell
HWC502
Doorbell
HWC502
Wireless
Digital Chime
HWC501CH
USB powered 5V DC
Digital Chime
1. Replace the ‘Doorbell button’ with the HWC502 doorbell
2. Remove the wiring from the ‘Mechanical Chime’ (if one was installed)
3. Make sure the ‘Bell Settings’ in the app is set to ‘Digital’
App>Homescreen>HWC502> >Bell Settings>Digital
4. Make sure the indicator LED on the HWC501CH blinks (Press reset once)
4. Connect the Chime in the app
App>Homescreen>HWC502> >Bell Settings(2nd)>Digital
Tap ‘Bind’
Now when the HWC502 doorbell is pressed; the HWC502 makes a ringing sound,
your phone receives a ‘call’ and the ‘HWC501CH Digital Chime’ rings
Original Transformer
(not incl, already installed)
230V AC => 8-16V AC
Original Transformer
(not incl, already installed)
230V AC => 8-16V AC
3. No extra Chime
4. Digital Chime
(Phone app)
(3)
(4)
(Phone app)
(Phone app)

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 4 Control device
Control device
After the device is connected successfully, tap
“My Home” at the bottom. The device name
shows in the list. Tap it to enter the control
panel of the device (Doorbell cam)
Remarks:
When device is online, operation via shortcuts is
supported; When the device is oine, device
displays “device is oine” and is greyed out.

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 4 Control device
Control device
From this page, all device settings can be
altered.
Tap the edit symbol : or to make changes
in name, location, share device, Bell Settings,
Motion Detection etc.
If there is a rmware update available, check
under ‘Firmware information’ to update the
rmware.

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 4 Control device
Back to main menu
Back to main menu
Exit app
Mute / unMute audio
SD/HD
Select quality
HD uses more data
Edit settings
Full screen
Record video
Micro SD card required
Screenshot
Micro SD card required
Playback
Show recorded
pictues / Video’s
Micro SD card required
Alarm
Receive a notication
when motion is detected
Talk to visitors
Wi-Fi signal strength

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 5 Profile
Profile (Me)
In order to make full use of the functionality of
this app and your Caliber Smart Home devices,
make your home situation match the situation
in the app.
1. Choose family name
2. Manage your rooms
3. Set the location, for area automations
4. Add members to the family

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 6 Scene’s & Automation
Scene’s
You can combine devices to do ‘tasks’ in a “scene”. Go to Smart (img1)
The next pages describes general information. Some products cannot preform scene’s
1. Tap“+” in the upper right of the page to create a new smart scene.
2. Tap “scene” img 2
3. Enter life scene name, add task, tap “Save”, as shown in the picture. A smart scene has
been created.
3. You can also change the scene you have already created (img1) , change scene name,
change task or delete smart scene etc.
img 1 img 2 img 3 img 4

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specications
SmartHome
No. 6 Scene’s & Automation
Automation
You can execute automations, when conditions are met.
1. Tap“+” in the upper right of the page to create a new smart scene
2. Tap “Automation”
3. Choose which conditions should be met “img3”.
4. Choose what ‘task /action’ should be executed“img3”.
5. img4 shows an example (This might include a dierent product). The Smart light
group“E27 RGBW” switches ON when the sun sets. For this function you need to set
your location, see prole.
More app functions can be found in our support page
img 1 img 2 img 3 img 4