Cam Scan CS-IPSD6000B User manual

001B0MWXZ1A3
Full HD Multi-Streams
Mini Dome IP Camera
User’s Manual
Ver. 1.3

1
Table of Contents
1. Overview................................................................................................................................2
1.1 Features......................................................................................................................2
1.2 Package Contents .......................................................................................................3
1.3 Dimensions..................................................................................................................5
1.4 Connectors (Indoor Only).............................................................................................6
1.5 Function Cable Definition (Outdoor Only) ....................................................................7
2. Camera Cabling.....................................................................................................................8
2.1 Connect Power............................................................................................................8
2.2 Connect Ethernet Cable...............................................................................................8
2.3 Connect Alarm I/O.......................................................................................................9
2.4 Waterproof Cable Connector.......................................................................................9
3. System Requirements ........................................................................................................11
4. Access Camera ...................................................................................................................12
5. Setup Video Resolution......................................................................................................17
6. Configuration Files Export / Import ...................................................................................18
Appendix A: Technical Specifications ......................................................................................19
Appendix B: Delete the Existing DC Viewer..............................................................................25
Appendix C: Setup Internet Security.........................................................................................26

2
1. Overview
The Full HD Multi-Streams Mini Dome IP Camera is an easy setup camera with
PoE supported to reduce complicate cabling. Up to 5 Megapixel Resolution is
offered for providing high definition images. Quad Streams Compression (H.264
Baseline / Main / High Profile + MJPEG) are supported for efficient bandwidth
and storage management. For dark environments, the camera has incorporated
WDR, 3DNR and Day/Night ICR technologies to capture clear images in
lowlight conditions.
1.1 Features
Progressive Scan CMOS Sensor
2M / 3M / 5M Resolution*
Dual Streaming- Full HD 1080P Real Time + D1 Real Time
Quad Streams Compression- H.264 Baseline / Main / High Profile + MJPEG
Multi-language Support
Tampering Alarm
Wide Dynamic Range
Motion Detection
Privacy Masks
Smart Picture Quality / 3D Noise Reduction
Vertical View Mode (image rotation by 90 degrees)
Smart IR Mode
Network Failure Detection
True Day/Night (ICR)
IR LED Module (working distance up to 25m)*
microSD Support
BNC Analog Output*
Weatherproof (IP66 International)*
ONVIF Support
(*) Optional

3
1.2 Package Contents
Please check the package contains the following items listed below.
Indoor Camera Package Contents
Full HD Multi-Streams
Mini Dome IP Camera
Self Tapping Screws (x3)
Plastic Screw Anchors (x3)
Quick Guide
CD
(bundled software and documentation)

4
Outdoor Camera Package Contents
Full HD Multi-Streams
Mini Dome IP Camera
Rubber Washers (x2)
Security Torx
Self Tapping Screws (x3)
Plastic Screw Anchors (x3)
Quick Guide
CD
(bundled software and documentation)

5
1.3 Dimensions
The dimensions of the IP Camera are shown below.
Indoor
Outdoor

6
1.4 Connectors (Indoor Only)
The diagram below shows the default button, microSD card slot and various
connectors of the IP Camera. Definition for each connector will be given as
follows.
No.
Connector
Pin
Definition
Remarks
1
RJ-45
-
10/100 Mbps Ethernet / PoE
2
Power
(AC 24V / DC 12V)
1
AC 24V Power-1
DC 12V Power
Power
connection
2
AC 24V GND
DC 12V Reserved
3
AC 24V Power-2
DC 12V GND
3
microSD Card Slot
-
For video recordings storage
4
Video
(BNC Connector)*
-
For analog videos output
5
Alarm & Audio I/O
1
Alarm In –
Alarm
connection
2
Alarm In +
3
Alarm Out –
4
Alarm Out +
5
Audio Out L
Line Out
6
Audio Out R
7
GND
8
Audio In
Line In
6
Default Button
-
Press the button with a proper tool for at least 20
seconds to restore the system.
(*) Optional
NOTE: Insert the microSD card into the microSD card slot before
powering on the camera. If the camera is already powered on, reboot
the camera after the microSD card is inserted.

7
1.5 Function Cables Definition (Outdoor Only)
No.
Connector
Pin
Definition
Remarks
1
RJ-45
-
10/100 Mbps Ethernet / PoE
2
Power (AC 24V / DC 12V)
1
AC 24V 1 / DC 12V –
Power
connection
2
GND
3
AC 24V 2 / DC 12V +
3
Alarm I/O
(4-Pin Terminal Block)
1
Alarm In –
Blue
2
Alarm In +
Green
3
Alarm Out –
Yellow
4
Alarm Out +
Orange
4
Audio I/O
Green
Line Out
Two-way audio
transmission
Pink
Line In
5
BNC
-
For analog videos output
-
Default Button
-
For the position of the default button,
please refer to the diagram shown in
section Connectors (Indoor Only).

8
2. Camera Cabling
Before users connect cables, make sure that all cables and the power adaptor
are placed in dry and well-waterproofed environments, e.g. waterproof boxes.
The purpose is to prevent moisture accumulation inside the camera and
moisture penetration into cables, which might lead to camera breakdown.
Please follow the instructions below to complete IP Camera connection.
2.1 Connect Power
For power connection, please refer to section Connectors (Indoor Only) for the
Indoor models, and see section Function Cables Definition (Outdoor Only) for
the Outdoor models. Alternatively, users can power the camera by PoE if a PSE
switch is available. Please refer to the section below for Ethernet cable
connection.
NOTE: If PoE is used, make sure Power Sourcing Equipment (PSE) is
in used in the network.
2.2 Connect Ethernet Cable
For best transmission quality, cable length shall not exceed 100 meters.
Connect one end of the Ethernet cable to the RJ-45 connector of the camera,
and plug the other end of the Ethernet cable to the network switch or PC.
NOTE: In some cases, Ethernet Crossover cable might be needed when
connecting the IP Camera directly to the PC.
Check the status of the link indicator and activity indicator LEDs. If the LEDs are
unlit, please check the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.

9
2.3 Connect Alarm I/O
For Indoor models, there is an 8-pin terminal block for the Alarm I/O and the
Audio I/O connections. For Outdoor models, the Alarm I/O is connected by a
4-pin terminal block. Refer to sections Connectors (Indoor Only) and Function
Cables Definition (Outdoor Only) for the pin definitions.
2.4 Waterproof Cable Connector
Follow the instruction below to waterproof the connectors of different types of
cables. The supported cables are as shown below, from left to right are:
All-in-One Cable, RJ-45 Cable and IP66 RJ-45 Cable.
All-in-One Cable
Follow the steps below to waterproof the connectors of the All-in-One cable.
Step 1:
Plug the cables to the connectors of the
All-in-One cable and coat the joints with
silicone gel. There should be no gap between
the connectors and the cables. For alarm I/O
connector and power connector, make sure
the side with wires attached is also sealed
with silicone gel.
Step 2:
Seal the end of the rubber coating of the
All-in-One cable as indicated in the figure on
the right. Please use enough silicone gel to
fill in the hose and wrap around each wire;
otherwise, waterproof function cannot be
guaranteed.

10
RJ-45 Cable
Follow the instruction below to waterproof the connector of the RJ-45 cable.
Plug the Ethernet cable to the connector of
the RJ-45 cable and coat the joint with
silicone gel. Make sure there is no gap
between the Ethernet cable and the
connector; otherwise, waterproof function
cannot be guaranteed.
IP66 RJ-45 Cable
For IP66 RJ-45 cable, please use an RJ-45 IP66 plug for connection to prevent
water damage. Follow the steps below for cable connection.
Step 1:
Loosen the thread-lock sealing nut on the
RJ-45 IP66 plug, and take out the supplied
connector from the plug. Thread the Ethernet
cable through the thread-lock sealing nut and
the RJ-45 IP66 plug. If the Ethernet cable is
already attached to a connector, please
remove it first.
Step 2:
Carefully remove a section of rubber coating
from the end of the Ethernet cable to reveal
the wires. Inset the wires to the correct pins
of the connector. Plug the Ethernet cable to
the connector of IP66 RJ-45 cable.
Step 3:
Fasten the RJ-45 IP66 plug to the connector
of the IP66 RJ-45 cable. Lastly, tighten the
thread-lock sealing nut to the plug.

11
3. System Requirements
To perform the IP Camera via web browser, please ensure the PC is in good
network connection, and meet system requirements as described below.
Items
System Requirement
Personal Computer
1. Intel®Pentium®M, 2.16 GHz or
Intel®CoreTM2 Duo, 2.0 GHz
2. 2 GB RAM or more
Operating System
Windows VISTA / Windows XP / Windows 7
Web Browser
Microsoft Internet Explorer 6.0 or later
Firefox
Chrome
Safari
Network Card
10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer
ActiveX control plug-in for Microsoft IE

12
4. Access Camera
For initial access to the IP Camera, users can search the camera through the
installer program: DeviceSearch.exe, which can be found in “DeviceSearch”
folder in the supplied CD.
Accessing the Camera by Device Search Software
Step 1: Double click on the program Device Search.exe.
Step 2: After its window appears, click on the <Device Search> button on the
top. All the finding IP devices will be listed in the page.
Step 3: Find the camera in the list by its IP address and click on it. The default
IP address of the camera is: 192.168.0.250.
Step 4: The default IP address of the camera may not be in the same LAN as
the IP address of the PC. If so, the IP address of the camera needs to
be changed. Right click on the camera and click <Network Setup>.
Meanwhile, record the MAC address of the camera, for future
identification.
Step 5: The <Network Setup> page will come out. Select <DHCP> and click
<Apply> down the page. The camera will be assigned with a new IP
address.
Step 6: Click <OK> on the Note of setting change. Wait for one minute to
re-search the camera.
Step 7: Click on the <Device Search> button to re-search all the devices. Find
the camera in the list by its MAC address. Then double click or right
click and select <Browse> to access the camera directly via a web
browser.

13
Step 8: A prompt window requesting for default username and password will
appear. Enter the default username and password shown below to
login to the camera.
Login ID
Password
Admin
1234
NOTE: ID and password are case sensitive.
NOTE: It is strongly advised that administrator’s password be
altered for the security concerns. Refer to the Full HD Multiple
Streams IP Camera Menu Tree in the supplied CD for further
details.
Installing DC Viewer Software Online
For the initialaccess to the IP Camera, a client program, DC Viewer, will be
automatically installed to the PC when connecting to the IP Camera.
If the Web browser doesn’t allow DC Viewer installation, please check the
Internet security settings or ActiveX controls and plug-ins settings (refer to
Appendix C: Setup Internet Security) to continue the process.
The Information Bar (just below the URL bar) may come out and ask for
permission to install the ActiveX Control for displaying video in browser.
Right click on the Information Bar and select <Install ActiveX Control…> to allow
the installation.
The download procedure of DC Viewer software is specified as follows.
Step 1: In the DC Viewer installation window, click on <Next> to start the
installation.
Step 2: The status bar will show the installation progress. After the installation
is completed, click on <Finish> to exit the installation process.
Step 3: Click on <Finish> to close the DC Viewer installation page.

14
Once the DC Viewer is successfully installed, the Home page of the IP Camera
will be shown as the figure below.
Vari-focal Lens Models

15
Motorized Lens Models

16
3x Zoom Lens Models
Image and Focus Adjustment
The image will be displayed on the Home page when the IP Camera is
successfully accessed. Adjust the zoom and the focus as necessary to produce
a clear image.
NOTE: Please refer to the Full HD Multiple Streams IP Camera Menu
Tree in the supplied CD for more details about the function items on the
Home page.

17
5. Setup Video Resolution
Users can setup video resolution on the Video Format page of the user-friendly
browser-based configuration interface.
Video Format can be found under this path: Streaming> Video Format.
The default value of video resolution is as below.
2M
H.264- 1920 x 1080 (15 fps) + H.264- 1280 x 720 (30 fps)
2M Real-time
H.264- 1920 x 1080 (30 fps) + H.264- 720 x 480 (30 fps)
3M
5M
For more video resolution combination details, please refer to the Full HD
Multiple Streams IP Camera Menu Tree in the supplied CD.

18
6. Configuration Files Export / Import
To export / import configuration files, users can access the Maintenance page
on the user-friendly browser-based configuration interface.
The Maintenance setting can be found under this path: System> Maintenance.
Users can export configuration files to a specified location and retrieve data by
uploading an existing configuration file to the IP Camera. This is especially
convenient to make multiple cameras having the same configuration.
Export
Users can save the system settings by exporting the configuration file (.bin) to a
specified location for future use. Click on the <Export> button, and the popup
File Download window will come out. Click on <Save> and specify a desired
location for saving the configuration file.
Upload
To upload a configuration file to the IP Camera, please first click on <Browse> to
select the configuration file, and then click on the <Upload> button for
uploading.

19
Appendix A: Technical Specifications
Camera
2M
2M Real-time
Image Sensor
1/2.8” Sony Progressive CMOS
Effective Pixels
1920 (H) x 1080 (V)
Shutter Speed
1 ~ 1/10000 sec.
Lens
Lens
3X AF / Motorized / Vari-focal
F Number
3X AF / Motorized- F 1.2
Vari-focal- F1.2 / F1.4
Focal Length
3X AF / Motorized / Vari-focal (F1.2)- 3.0 ~ 9.0 mm
Vari-focal (F1.4)- 2.8 ~ 12.0 mm
FOV
3X AF- 96.1°(Wide) ~ 32.0°(Tele)
Motorized / Vari-focal (F1.2)- 96.7°(Wide) ~ 22.6°(Tele)
Vari-focal (F1.4)- 93.0°(Wide) ~ 21.7°(Tele)
Minimum Illumination
3X AF / Vari-focal (F1.4)- 0.2 lux (Color) / 0.02 lux (B/W)
Motorized / Vari-focal (F1.2)- TBD
Operation
Multiple Languages
English / French / German / Italian / Japanese / Korean / Portuguese /
Russian / Simplified Chinese / Spanish / Traditional Chinese
Image Setting
Iris Control*
3X AF- P-Iris / DC-Iris
Vari-focal / Motorized- DC-Iris
Backlight Compensation
On / Off
White Balance
Auto / Manual / ATW / One Push
Noise Reduction (3D)
On / Off
Wide Dynamic Range
On / Off
Privacy Mask
On / Off
Brightness
Manual
Exposure
Auto / Manual
Sharpness
Manual
Contrast
Manual
Saturation
Manual
Hue
Manual
Digital Zoom
Support
Motion Detection
On / Off / By Schedule
Privacy Mask Type
Color
ICR
Auto / On / Off / Smart
ICR + IR LED*
Auto / LED On / LED Off / Smart IR / Light Sensor
Tampering Alarm
On / Off / By Schedule
Audio
Two-way Audio
Line In / Line Out
Compression
G.711 / G.726
Network
Interface
RJ-45, 10/100 Mbps Ethernet
Video Compression
H.264 (MPEG-4 Part 10/AVC) / MJPEG
Video Streaming
Dual Streams- H.264 + H.264 / H.264 + MJPEG
Quad Streams- H.264 x 4 / H.264 x 3 + MJPEG
Video Resolution
H.264- Full HD 1080P / SXGA / HD 720P / XGA / SVGA / D1 / VGA / CIF
MJPEG- Full HD 1080P / SXGA / HD 720P / XGA / SVGA / D1 / VGA / CIF
Frame Rate
Dual Streams
1080P (15/13 fps) + 720P (30/25 fps)
1080P (30/25 fps) + D1 (30/25 fps)
Protocol
ARP, IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP,
SMTP, DHCP, PPPoE, UPnP, IGMP, SNMP, QoS, ONVIF
Security / Authorization
HTTPS / IP Filter / IEEE 802.1X
Alarm
Input
1 Set, 5V 10kΩ pull up
Output
1 Set, Photo Relay Output 300V DC/AC
Event Notification
HTTP / FTP / SMTP
microSD
microSDHC 32GB support
Supported Web Browser
Internet Explorer (6.0+) / Chrome / Firefox / Safari
User Account
20
Password Levels
User and Administrator
Table of contents