Camaflexi T1402F User manual

BED FULL
ASSEMBLY INSTRUCTIONS
CONCORD HIGH LOFT
deliver the highest quality. In the unlikely event that you note any
damaged or missing part please do not return to the store. Please
reach out to us at or by phone at [phone]info@cama exi.com

so that we can expedite shipment of replacements.
We appreciate your choice in purchasing our furniture and strive to
Pg 1/13

Please read the following before attempting assembly
-Your new piece of furniture requires easy assembly. Below are some suggestions
to make it easier, minimize time and save you unneeded grief.
-Do not dispose of any packing material until assembly is complete.
-Be sure you assemble the item on a soft surface such as cardboard or a blanket
to protect the quality nish from scratches or indentation.fi
-Separate and organize all hardware in plastic tub, if available, for easy
identification.
-Count all hardware and parts to make certain you received all before attempting
assembly.
-Inspect each wood part for any unlikely shipping damage or manufacturing aws.fl
Please contact us at info@cama exi or call [phone], so that we canfl
expedite a shipping of any replacement parts or hardware if needed.
-You have purchased a real solid wood furniture which may present natural
imperfections such knots and minor splits and cracks. Natural wood loses and
gains moisture due to seasonal changes which over time may also affect the wood.
If the structural integrity of the piece is not compromised, we recommend applying
a touch of marker or wax fillers, for any minor imperfections, which can be
purchased at most hardware stores. Color variations are normal in real wood
furniture, due to the natural grain of the wood.
Caring for you new Wood Furniture
-Always clean with a damp cloth or furniture polish.
-Do not use alcohol or alcohol solvents for cleaning.
-Avoid placing in direct sun light to minimize damage due to UV rays.
-Try not to place furniture very near or on top of heaters.
We hope you enjoy your new piece of Natural Wood Furniture
for years to come!
Pg 2/11

SAFETYWARNINGS
Follow the information on the warning labels on the upper bunk bed structure and on the
carton. Do not remove warning label from the bed.
Always use the recommended size mattress support, or both, to help prevent the
likelihood of entrapment or falls.
The top surfaces of the mattress must be at least 5" below the upper edge of the
guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Prohibit more thant one person on the upper bunk.
Periodically check and ensure that the guardrails, ladder and other components are in
their proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed.Always prohibit jumping on the bed.
Always use the ladder for entering and leaving the upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night-light may provide added safety for a child using the upper bunk.
If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the
bed should be placed against the wall to prevent entrapment between the bed and the
wall.
Always use guardrails on both long sides of the upper bunk.
The use of a water or sleep oatation mattress is prohibited.fl
Keep these instructions for future reference.
We recommend assembling your bunk bed on the shipping carton to protect your oor orfl
carpet. Be certain all staples are out of the box before beginning assembly on the
shipping carton.
SIZE OF MATTRESS: Upper and lower foundation
THIS BED IS DESIGNEDTO USE A MATTRESS (74"TO 75") LONG, AND (52-1/2"TO
53-1/2") IN WIDTH AND THE ENCLOSED SLAT KIT SYSTEM.THE TOTAL
THICKNESS OF MATTRESS AND FOUNDATION MUSTNOTEXCEED 8"
NOTE:THERE MUST BE ATLEAST 5" FROM MATTRESS SLEEPING SURFACE TO TOP
EDGE OF GUARDRAIL.
Strangulation Hazard: Never attach or hang items to any part of the bunk bed that
are not designed for use with the bed for example, but not limited to hooks, belts and
jump ropes.
REPLACEMENT PARTS:
REPLACEMENT PARTS, INCLUDING ADDITIONAL GUARDRAILS, MAYBE
OBTAINED BY CONTACTING ‘ECOFLEX FURNITURE LLC’ at: info@camaflexi.com,
Eco ex Furniture LLC. fl
1031 E.Mountain Street-Bldg.306
KernerSville, NC 27248
United States
Pg 3/11
or by CALLING: [phone].

INSTRUCTIONS FOR MODEL: T1402F/03F/04F
CONCORD HIGH LOFT BED FULL SIZE
IMPORTANT:
Read all instruction rst, then follow each step as numbered and described.
Two or more persons required for assembly.
Caution: These assembly steps have been engineered to result in a quality product.
Failure to follow instructions may result in unsound place of furniture.
Before using furniture, make sure all connections are secured.
TOOLS REQUIRED:
Philips Screwdriver
Hammer
CARTONS REQUIRED:
-Carton 1/1 bed end structures (Headbords and Footboards, slats, ladder sides,
hardware, assembly instruction, rails. guardrails, ladder, steps).
10
10
11
11
11
11
11
22
24
17
9
16
8 3
3
7
6
23
5
5
4
4
Pg 4/13
15
15
18
18
14
14
14
14
14
20
21
PARTS LIST (SEPARATE PARTS OF BUNK BED ACCORDING TO NUMBERING):
NR. (1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20) QUANTITY BOX 1 Of 1.
25
19
19
19
8
8
19

Pg 5/13
ATTENTION!!! HARDWARE BELOW (SEPARATE AND CONFER)
A08
08
26
13
01
34
48
02
02
01
B
C
D
E
F
G
H
J1
K
1/4" x 100
1/4"
7 x 100
7 x 50
4 x 30
10 x 50
10mm
L
M
04
24
73mm
Spacer
Union Screw
J2
1/4" x 70
Union Screw
02
3,5 x 16

SKU# T1402F/03F/04F
Pg 6/13
G
G
G
G
G
G
G
03
04
05
2x
2x
2x G
Step - 02
G
G
G
G
WARNING
DO NOT REMOVE THIS LABEL
To help prevent serious or fatal injuries from entrapment or falls:
- Never allow a child under 6 years on upper bunk.
- Use only ma?ress which is 74" - 75" long and 52 1/2" - 53 1/2"
wide on upper bunk.
- Use only ma?ress which is 74" - 75" long and 52 1/2" - 53 1/2"
wide on lower bunk.
- Ensure thickness of ma ress and founda on combined does not! !
excee 9" and ma?ress is at least 5" below upper edge of guardrails.9
- Use guardrails on both sides of upper bunk
- Prohibit horseplay on or under bed (s).
- Prohibit more than one person on upper bunk.
- Use ladder for entering and leaving upper bunk.
- STRANGULATION HAZARD - Never a!ach or hang
items to any part of the bunk bed that are not designed
for use with the bed, for example, but not limited to
hooks, belts and jump ropes.
**** Product Information ****
Concord High Loft Bed Full Size
COLOR
Date of Manufacture:
Made in Brazil
Manufacture by:
Ecoflex Furniture LLC.
1031 E.MountainStree–tBldg.306
KernerSville,NC27248
UnitedStates
Step - 01
G
G
G
G
7
6
G16x
G
G
8
3x
G
9
1x
G
G
16
1x
1x
G
17
G
G
G
G08
4x
G32x
19

Step - 03
Pg 7/13
C08x E01x
03
04
05
C+E
C+E
C+E
C+E
CE
M
L02x M08x
M
L
L
+
05
C+E
C+E
22
23
Step - 04
C08x E01x
03
04
05
C+E
C+E
C+E
C+E
CE
M
L02x M08x
M
L
L
+
05
C+E
24
25
19
19
C+E
C+E
C+E
C+E
19
C+E
19

8
8
A+E
A+E
C+E
C+E
Pg 8/13
Step - 05
C+E C+E
C+E
A+E
A+E
A+E
A+E
A+E
A+E
B
B
B
B
B
B
B
06
7
8
B08x A08x
C08x E01x
A
B
E
M8x
MM
18
18
16
C+E
C+E
C+E

1515
11
11
11
11
11
FFF
F
F
FFFFFFF
F
F
F
F
F
F
F
F
F
F
F
F
F
15
11
Pg 9/13
Step - 06
H
F
11 11
15
F28x H02x
Spacer

Step - 07
21
14
14
D
E
D10x E01x
Step -08
14
14
14
20
21
14
20
14
14
14
14
DE
DE
DE
DE
DE
D
E
D
E
D
E
D
E
D
E
Pg /110 3

C+E
C+E
D+E
D+E
17
9
Step - 09
C02x
E01x
D02x
DE
E
D
Pg 11/13

Step - 10
E01x
D01x
F06x
Pg 12/13
D
10
10
F
F
F
F
F
F
E

K
J
J1
Step - 11
Pg 13/13
K
J
J
J2 02x K01x
Option 01
Option 02
J
J2
J1
J2 J1
02x