Cambridge Audio Melomania 1+ User manual

QUICK START
GUIDE
STATUS LEDIMPORTANT!
1. Flashing blue and white: waiting to pair
2. Slow ash white: connected and waiting for signal
3. Fast ash white: waiting to connect
4. No light: connected and playing audio or power o
5. White ‘pulsing’ light: charging in case
Dear Fellow Music Lover,
Thank you for purchasing our Melomania 1+ earphones.
We’re excited that you now own a pair.
Please follow the Bluetooth pairing process carefully as it
is quite critical in order to connect your earphones with
your device and app fully, passing a data stream as well as
music.
To improve your product as time goes on, we will make
regular rmware updates, so please check the Melomania
App and update your rmware to enjoy these ongoing
enhancements and bug xes (switch on notications to be
alerted).
Enjoy the music!
- The Cambridge Audio Melomania Team
P.S. In the app is a “Feedback” button. Please do tell us
what you think! Our team reads all comments and are
committed to your satisfaction.
1 2 3 4 5
AP37624/6
NEED MORE HELP?
If you encounter any hiccups, please place the earbuds
back in the case for a few seconds, then take them back
out. This allows them to reset their connection (just be
patient for a few seconds while they reconnect fully).
When you use the app it may take a few seconds to
connect so, if you need to press the “Try Again” button, it
may help to wait a few seconds.
For more setup instructions and videos as well as rmware
updates, download the Melomania App or visit:
melosupport.cambridgeaudio.com
Please use only the specic ear tips included with this product. Use of other tips is likely to prevent charging.
BUTTON PRESS FUNCTIONS STATUS
Play/Pause Playing
Next track Playing
Previous track Playing
Volume + Playing / Calling
Volume
- Playing / Calling
Accept a phone call Calling
Reject a phone call Calling
End phone call Calling
Voice assistant Pause
Manual Pairing Pause 3 secs

1. DOWNLOAD THE MELOMANIA APP
For optimal performance and additional help, please
download the Melomania app on the App Store or Google
Play Store.
If you already have the app downloaded, please make sure it
is updated to the latest version.
2. CHARGE YOUR EARPHONES & CASE
Before using your Melomania earphones for the rst time,
please place them in the case and plug into a USB power
socket for at least 30 minutes to allow them to charge.
3. POWER ON
Remove both earphones from the case. Both earphones
should power on automatically. One earphone may start
ashing blue and white, indicating that it is ready to pair.
If not, manually power on each earphone by pressing the
button until you hear “Power On” and the LEDs ash white.
4. ENABLE BLUETOOTH PAIRING ON
YOUR EARPHONES
The LED on one earphone will ash blue and white when
waiting to pair, which will happen automatically on some
product releases.
If neither of the earphones are ashing blue and white, press
and hold the surface of one earphone for 3 seconds until
you hear “Waiting to Pair”. The other earphone should be
powered on and ashing white.
5. ENABLE BLUETOOTH ON YOUR DEVICE
6. SELECT EARPHONE IN BLUETOOTH
SETTINGS
You should see Melomania 1+ L (or R) listed. Select this.
7. WAIT FOR POP-UP NOTIFICATION AND
PAIR
Wait for the “Bluetooth Pairing Request” pop-up notication
to appear and press “Pair”.
When pairing is successful, one earphone will be shown as
“connected”, and the other will be in the paired devices list,
and shown as “not connected” on iOS devices.
Some devices may call the secondary earphone “Headset”.
On some devices a third connection may be listed, this is
perfectly normal. Don’t disconnect or remove it.
You may now return to the Melomania App to customise
your listening experience.