Creative CB2530 User manual

i
English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Français. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Nederlands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Português . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Svenska . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Norsk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Dansk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Suomi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Polski. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
Magyar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
CB2530 Headphones.book Page i Thursday, January 13, 2005 2:55 PM

ii
CB2530 Headphones.book Page ii Thursday, January 13, 2005 2:55 PM

1
English
Creative Digital Wireless
Headphones CB2530
ON/OFF
switch
Bluetooth LED
POWER LED
VOLUME jog dial
Adjustable headband
Battery cap
CB2530 Headphones.book Page 1 Thursday, January 13, 2005 2:55 PM

2
Audio Adapter
ON/OFF button
POWER/Bluetooth
LED
3.5mm
minijack
CB2530 Headphones.book Page 2 Thursday, January 13, 2005 2:55 PM

3
Getting Started
1
1Insert batteries in your headphones
1. Lift the battery cap on the left headphone and insert the batteries as shown in Figure 1.
Your Creative Digital Wireless Headphones are supplied with three AAA batteries (two
for headphones and one for audio adapter).
Figure 1
CB2530 Headphones.book Page 3 Thursday, January 13, 2005 2:55 PM

4
22Insert a battery in your audio adapter
1. Slide the audio adapter cover back and insert the battery as shown in Figure 2.
3
3Change the headphone ring (optional)
To remove the ring, push the ring tab down and lift it away from the headphone, as shown
in Figure 3.
Figure 2
Figure 3
CB2530 Headphones.book Page 4 Thursday, January 13, 2005 2:55 PM

5
4
4Pair your headphones and audio adapter
1. Connect your audio adapter's 3.5 mm minijack to the headphone jack of your audio
output device, as shown in Figure 4.
2. On your audio adapter, press and hold the ON/OFF button until the POWER/
Bluetooth LED lights up in blue.
3. Switch on your headphones. The POWER LED lights up in red. The Bluetooth LED
lights up in blue.
When the Bluetooth LEDs on your audio adpter and headphones blink, the devices are
paired and connected.
• You can pair the headphones and audio adapter before or after connecting the audio
adapter’s minijack to the headphone jack.
Figure 4
CB2530 Headphones.book Page 5 Thursday, January 13, 2005 2:55 PM

6
4. Keep your headphones within 10 meters of the audio adapter, as shown in Figure 5.
• Make sure that your headphones are within the working distance of the audio
adapter. When the headphones are out of working range, the Bluetooth LED on both
the headphones and the audio adapter remains lit in blue.
• To reconnect the headphones and the audio adapter, bring the two devices closer.
• When battery levels are too low, during the last 10 minutes before your headphones
turn off,
• the POWER LED blinks red.
• your headphones beep every 30 seconds.
• Pairing your headphones with a new device can take up to 15 seconds. Subsequent
pairing with the same device will take significantly less time.
Figure 5
CB2530 Headphones.book Page 6 Thursday, January 13, 2005 2:55 PM

7
Using Your Headphones
1
1Adjust the headphone volume
2
2Turn off your headphones and adapter
1. Switch off your headphones.
2. On your audio adapter, press and hold the ON/OFF button until the POWER/
Bluetooth LED blinks.
• If the audio adapter is not connected to your headphones for more than two
minutes, the audio adapter automatically turns off.
Figure 6
To increase the
volume, turn the
VOLUME jog
dial toward the
plus + sign.
To d e c r e a s e t h e
volume, turn the
VOLUME jog dial
toward the
minus – sign.
To mute the
audio, press the
VOLUME jog dial.
CB2530 Headphones.book Page 7 Thursday, January 13, 2005 2:55 PM

8
General Specifications
Bluetooth version
1.2
Bluetooth 2.4 GHz Class 2 Radio, up to a radius of 10 meters
(Varies depending on environment)
Supported Bluetooth profile
Advanced Audio Distribution Profile (A2DP)
Audio adapter weight
20 g (including battery)
Headphone weight
203 g (including batteries)
Battery type
AAA Alkaline or rechargeable
Signal-to-Noise Ratio
>85dB
Play time*
Up to 8 hours
*may vary depending on usage.
CB2530 Headphones.book Page 8 Thursday, January 13, 2005 2:55 PM

9
More Information
Register your product!
Enjoy a host of benefits by registering your product during installation, or at
www.creative.com/register. Benefits include:
• Service and product support from Creative.
• Exclusive updates on promotions and events.
Please note that your warranty rights are not dependent on product registration.
For more information on Creative Customer Support Services and Warranty go to
www.europe.creative.com/support.
Creative Knowledge Base
Resolve and troubleshoot technical queries at Creative's 24-hour self-help
Knowledge Base. Go to www.creative.com and select your region.
Copyright © 2005 Creative Technology Ltd. All rights reserved. Information in this document is subject to change without
notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this document may be
reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording,
for any purpose without the written permission of Creative Technology Ltd. Copyright © 2005 Creative Technology Ltd.
Bluetooth is a registered trademark of the Bluetooth SIG, Inc., USA. All other products are trademarks or registered
trademarks of their respective owners and are hereby recognised as such. All specifications are subject to change without
prior notice. Actual contents may differ slightly from those pictured.
CB2530 Headphones.book Page 9 Thursday, January 13, 2005 2:55 PM

10
Safety Information
General Safety
• Do not listen to audio at high volume levels for prolonged periods of time.
Servicing
Do not attempt to service the product on your own. Refer all servicing to your local
Customer Support Services center.
For removable batteries
• The battery must be recycled or disposed of properly. Contact local agencies for
recycling and disposal information.
• Do not allow metal objects to touch the terminals of your battery.
• If there is leakage, an offensive odor, discoloration or deformation during charging or
use, remove the battery and do not use it again. Clean your hands well before touching
food or sensitive areas, for example, your eyes.
Improper handling of your headphones and audio adapter may void the warranty.
For more information on Creative Customer Support Services and Warranty go to
www.europe.creative.com/support
CB2530 Headphones.book Page 10 Thursday, January 13, 2005 2:55 PM

11
Français
Creative Digital Wireless
Headphones CB2530
MARCHE/
ARRET
Bouton
DEL Bluetooth
DEL
ALIMENTATION
Molette du
VOLUME
Serre-tête ajustable
Compartiment
des piles
CB2530 Headphones.book Page 11 Thursday, January 13, 2005 2:55 PM

12
Adaptateur audio
Bouton MARCHE/
ARRET
ALIMENTATION/
Bluetooth
DEL
3,5 mm
mini-prise
CB2530 Headphones.book Page 12 Thursday, January 13, 2005 2:55 PM

13
Démarrage
1
1Insérer les piles dans le casque
1. Soulevez le couvercle du compartiment des piles situé du côté gauche du casque et
insérez les piles comme illustré à la Figure 1.
Votre casque Creative Digital Wireless Headphones est livré avec 3 piles AAA (deux
pour le casque et une pour l’adaptateur audio).
Figure 1
CB2530 Headphones.book Page 13 Thursday, January 13, 2005 2:55 PM

14
2
2Insertion d’une pile dans l’adaptateur
audio
1. Faites glisser le couvercle de l’adaptateur audio vers l’arrière et insérez les piles comme
illustré à la Figure 2.
3
3Changer l’anneau du casque (facultatif)
Pour enlever l’anneau, poussez l’ergot de l’anneau vers le bas et séparez celui-ci du casque,
comme illustré à la Figure 3.
Figure 2
Figure 3
CB2530 Headphones.book Page 14 Thursday, January 13, 2005 2:55 PM

15
4
4Connecter le casque à l’adaptateur audio
1. Connectez la mini-prise de 3,5 mm de l’adaptateur audio à la prise casque de votre
périphérique de sortie audio, comme illustré à la Figure 4.
2. Sur l’adaptateur audio, appuyez sur le bouton ON/OFF (MARCHE/ARRET) et
maintenez-le enfoncé jusqu’à ce que la DEL POWER/Bluetooth (ALIMENTATION/
Bluetooth) s’allume en bleu.
3. Mettez votre casque sous tension. La DEL POWER (ALIMENTATION) s’allume en
rouge. La DEL Bluetooth s’allume en bleu.
Lorsque les DEL Bluetooth de l’adaptateur audio et du casque clignotent, les
périphériques sont connectés.
• Vous pouvez connecter le casque et l’adaptateur audio avant ou après la connexion
de la mini-prise de l’adaptateur audio à la prise casque.
Figure 4
CB2530 Headphones.book Page 15 Thursday, January 13, 2005 2:55 PM

16
4. Votre casque doit toujours se trouver à une distance maximum de 10 mètres de
l’adaptateur audio, comme illustré à la Figure 5.
• Assurez-vous que le casque se trouve dans la distance de fonctionnement de
l’adaptateur audio. Lorsque le casque se trouve hors de la portée de fonctionnement,
la LED Bluetooth du casque et de l’adaptateur audio reste allumée en bleu.
• Pour reconnecter le casque et l’adaptateur audio, rapprochez les deux périphériques.
• Lorsque le niveau des piles est trop faible, durant les 10 dernières minutes avant que
votre casque ne se mette hors tension,
• la LED POWER (ALIMENTATION) clignote en rouge ;
• votre casque émet un son toutes les 30 secondes.
• La connexion de votre casque à un autre périphérique peut prendre jusqu’à 15
secondes. Une connexion ultérieure au même périphérique prendra moins de temps.
Figure 5
CB2530 Headphones.book Page 16 Thursday, January 13, 2005 2:55 PM

17
Utilisation de votre casque
1
1Régler le volume du casque
2
2Mettre le casque et l’adaptateur hors
tension
1. Eteignez votre casque.
2. Sur l’adaptateur audio, appuyez sur le bouton ON/OFF (MARCHE/ARRET) et
maintenez-le enfoncé jusqu’à ce que la DEL POWER/Bluetooth (ALIMENTATION/
Bluetooth) clignote.
• Si l’adaptateur audio n’est pas connecté au casque pendant plus de deux minutes, il
s’éteint automatiquement.
Figure 6
Pour augmenter le
volume, tournez
la molette
VOLUME vers le
signe +.
Pour diminuer le
volume, tournez
la molette
VOLUME vers le
signe -.
Pour couper le son,
appuyez sur la
molette VOLUME.
CB2530 Headphones.book Page 17 Thursday, January 13, 2005 2:55 PM

18
Caractéristiques générales
Version Bluetooth
1.2
Radio classe 2 Bluetooth 2,4 GHz, avec une portée maximum de 10 mètres
Varie en fonction de l’environnement
Profil Bluetooth pris en charge
A2DP (Advanced Audio Distribution Profile, profil de distribution audio avancé)
Poids de l’adaptateur audio
20 g (piles incluses)
Poids du casque
203 g (piles incluses)
Type de piles
Piles AAA alcalines ou rechargeables
Rapport signal/bruit
>85 dB
Durée de lecture*
Jusqu’à 8 heures
*peut varier en fonction de l’utilisation.
CB2530 Headphones.book Page 18 Thursday, January 13, 2005 2:55 PM