Camera2000 Pz0513 User manual

DESCRIPTION
PRECAUTIONS
FEATURES
PARTS INSTRUCTION
Pz0513
Ultra Wide Dynamic Mini Camera
User's Manual
Average camera with BLC off Average camera with BLC on Ultra Wide Dynamic Range camera
Ultra Wide Dynamic Range
The captured wide dynamic range is 102dB typical and can reach
120dB maximum.
High Effective Resolution
Image resolution as high as 690TVL-E, offering enhanced horizontal
and vertical resolution useable in existing as well as new CCTV
systems.
Lower Illumination Working Capability
0.1Lux low illumination (IR OFF)
3D Noise Eliminating Technology
Adopts Pixim fully digitalized 3D noise reduction technology to
minimize noise, extending DVR storage by 30%+.
This camera adopts innovative DPS(Digital Pixel System) image
sensor and image processing technology. The sensor picks up details
from each pixel based on hundreds of samples per video frame. vs
CCD's limited exposures, to ensure wider dynamic range than isposs
-ible with analog CCD. The image quality is even brilliant under
extreme lighting conditions.changeable lighting condition.
“SEAWOLF Image Sensor
1. Use the Appropriate Power Supply
2. Do not attempt to disassemble the camera.
3. Handle the camera with care.
The input power will be DC12V . Be sure to connect it to the
appropriate power. Wrong connection may cause malfunction and
damage to the video camera.
To prevent electric shock, do not remove screws or covers. There
are no user serviceable parts inside. Ask a qualified service person
for servicing.
Do not abuse the camera. Avoid striking, shaking, etc. The camera
could be damaged by improper handling or storage.
4. Do note use strong or abrasive detergents when cleaning the
camera body
5. Do not putthe cam era in a place w ith interference.
Use a dry cloth to clean the camera when dirty. In case the dirt is
hard to remove Use a mild detergent and wipe gently.
When this camera is installed near the equipment like wireless
communication device which emits strong electromagnetic field,
some irregularity such as noise on monitor screen may happen.
Enter Right
Left
Up
Down
OSD Menu Operation
ENTER: Enter Menu or Select Menu
UP/DOWN: This button is used to move the cursor upward or
downward.
LEFT/RIGHT: This left or right button is used to move the cursor
horizontally or change parameter.
OSD Menu Setup
SW series Ultra WDR cameras are new CCTV cameras which adopt
Pixim'sinnovative SEAWOLF image sensor chip based on Digital
Pixel System technology. The resolution is up to 690TVL-E and
the industry-leading wide dynamic range is up to 120dB. This WDR
ensures brilliant image quality under any lighting environment. The
image and color quality is also excellent in low illumination environ
-ments. This camera series is a ultra wide dynamicrange camera in
the real sense using digital sampling which can't be paralleledby
average wide dynamic range cameras using older generation CCD
imagers. The application of 3D digital noise reduction technology
ensures higher S/N, which efficiently reduces the digital storage and
transmission data saving system cost. Fashionable and professional
exterior design and special all-in-one all directional bracket, makes
round-the-clock surveillance easy and convenient.
“”
®

AGC:
:
Move cursor to AGC by Up and Down button, set AGC by Left and
Right Button as NORMAL, LOW and HIGH. Setting AGC is better
for cameras to work in wider lighting range, if the illumination is low,
can set AGC high to rise the sensitivity of cameras.
LENS SELECT:
Move cursor to LENS SELECT, set LENS SELECT by Right and Left
button as :MANUAL,DC:DC Automatically. MANUAL FOR
MANUAL IRIS LENS, DC for AUTO IRIS LENS.
FLUORESCENT:
Move cursor to FLUORESCENT by Up and Down button, set by Left
and Right buttonas: OFF, CRR2: Color Rolling Restrain. Cameras
output color rolling image under fluorescent lamp, CRR can restrain
color rolling, keep the image stable.
D/N Control:
Move cursor to D/N Control by Up and Down button, set D/N by Left
andRight button as: OFF; Auto;GPIO: External Control; On. The
illumination is very low at night, so we need to rise the sensitivity and
improve imaging quality, then we can get better image quality. Set
D/N in accordance with different actual need.
SAVE&EXIT:
:
Move cursor to SAVE&EXIT by Up and Down button, set by Left
and Right button as SAVE&EXIT;DEFAULT,CANCEL.
LANGAGE SELECT:
:
Move cursor to LANGAGE SELECT by Up and Down button, set by
Left and Right button as ENGLISH;CHINESE.
ATW
MEDIUM
OFF
NORMAL
OFF
DC
AUTO
ENGLISH
DEFAULT
WDR CONTROL
BLC
WHITE BALANCE
LENS SELECT
D/N CONTROL
LANGAGE SELECT
AGC
FLUORESCENT
SAVE
()ATW/AWB
()LOW/NORMAL/MEDIUM/HIGH
()OFF/ON
()LOW/NORMAL/HIGH
()OFF/CRR/CRR2
()MANUAL/DC
()OFF/AUTO/GPIO
()ENGLISH/CHINESE
()CANCEL
CAMERA SETUP
WD NROMAL
SAVE
PRESETS
PRE
WDR ZONE SELECT:
NORMAL METER PRESETS
WD NROMAL/SAFE AREA/ATM/LOW 1/3
CANCEL
*Specialists press "Left, Right, Left, Right, Down" button enter superior menu.
OSD MENU OPERATION
WDR Control:
Press Enter to show the menu, move the cursor to WDR Control, set
MEDIUM, NORMAL, LOW, HIGHby left and right button; choose
the setting for WDRinaccordance with the lighting condition, set
High in strong lighting contrast to realize higher quality image.
WDR ZONE SELECT:WD NROMAL/SAFE AREA/ATM/LOW 1/3.
BLC:
move to BLC by Up and Down button, set BLC by Left and Right
button: On and Off.
WHITE BALANCE:
Move to White Balance by Up and Down button, set White balance by
Left and Right button: AWB: Auto White Balance; ATW: Auto Track
-ing White Balance. The color's temperature are different in different
lighting condition,The color's temperature changes in different ligh
-ting condition, so the white color in video image changes if the light
-ing condition changes. AWB means cameras can compensate color
temperature automatically. In some special environment, in orderto
keep the same color temperature , ATW setting can keep a fixed color
temperature
*Specification is subject to change without prior notice
Model
Sensor
Video Format
SYNC Mode
Resolution
S/N Ratio
Mini illumination
AGC
White
Balance
BLC
WDR control
Voltage
Current
Lens
Working Temperature
Size
Weight
1/3 DPS Sensor”
PAL/NTSC
INTERNAL
690HTVL-E
normal, low, high
ON,OFF
medium, normal, low, high
DC12V
>50dB（AGC OFF）
Tracking White Balance, Auto White Balance(ATW)
-10 C ~50 C
D/N
OFF, External Control, Auto; ON
Sensor Control Power
0.1Lux
100g
（ ）2200~10000 KAuto White Balance
38X38mm
<150mA
SPECIFICATION
Automatic
Mode
Pz0513
2.8mm or 3.6mm