CAMPARK V40A User manual

此页不做印刷
尺寸:100x125mm
封面200g铜版纸,内页80双胶纸

4K Ultra HD
Action Camera
V40A
UHD 4K


Accessories Introduction
20210626


If You Have Any Questions or Problems.
Please contact us by
We will offer prompt and authoritative reply within 24 hours and try
our best to resolve your problem ASAP.
More Safe Guarantee with CAMPARK!
If you are not satisfied with our product. Please tell us about your
thought. That will be much appreciated.
support@campark.net
Wir werden uns innerhalb von 24 Stunden schnell und
maßgeblich bei Ihnen melden und uns bemühen, um Ihr
Problem so schnell wie möglich zu lösen.Sicherer mit
CAMPARK!
Wenn Sie mit unserem Produkt nicht zufrieden sind.Bitte teilen
Sie und Ihre Kommentare mit,Ihre Hilfe wird geschätzt.
support@campark.net
Wenn Sie irgendwelche Fragen oder Probleme
aufgetreten sind.
Kontaktieren Sie bitte per Email unter:


English

English

Q: Which type of memory card can be supported by this camera?
This camera can support a Class 10 Micro SDHC Memory CardA:
(TF Card),128 GB is the maximum size that can be supported.
Although you have already inserted the SD card, the screen Q:
prompts "Please insert SD card".
1.Please make sure that the micro SD card is formatted in the A:
camera before using. 2. If the micro SD card is formatted and the
problem still exists, the file system of the original SD card may be
corrupted. Please try to change a micro SD card
(class 10 or above, 8-128GB).
The recorded files have not been saved.Q:
You need to make sure the camera is recording and the SD card A:
is in the correct format for normal recording or replace by other SD
card that meets the requirements.
Can not operate or turn on the camera normally.Q:
First ensure that the battery can be charged, whether full A:
charged or replaced the backup battery and then boot up the
operation.
Action camera goes hot during normal use.Q:
Because this machine is a fully sealed digital device, it will have a A:
certain amount of heat during use, temperatures of around 45
Celsius is within tolerant range.
1

Q: Sound quality is poor or there is no sound on playback.
1.Please make sure that the device is not in the waterproof case A:
while recording, because the waterproof case is tightly-sealed and
will reduce the sound. 2. Please make sure the audio is on in
the settings.
Is the remote control waterproof?Q:
The remote control is not completely waterproof, so it should not A:
be fully immersed in water. If the camera encounters with occa-
sional splashing water, please wipe it clean and dry in time.
2

Attention
Product Description
Button Instructions
Preparation and Installation
Battery Charging and Installation
SD Card Insertion and Formatting
Operation Instructions
Turn ON/OFF
Mode Operation Instructions
Settings Table
Wi-Fi/Computer/TV Connecting
Product Specifications
4
5
6
10
19
22
.............................................................
...............................................
......................................
............................................
................................
............................................
3

- Keep it safe from falling and dropping.
- Keep it distance from any strong magnetic interference objects
like electrical machine to avoid strong radio waves that Might be
damage the product and the quality of sound and image.
- Keep the camera away from water and liquids(unless equipped
with waterproof case). This may cause the malfunction of camera.
- Keep it safe from children while on charging. It takes about 3 hours
to charge the battery. We advise you to take the battery out of the
camera after use in order to avoid loss of battery power.
- We recommend you use high quality Class 10 Micro SD Card
max support for the best results. Please format the micro
SD card on the camera before using and restart the camera after
formatting.
- Do not expose the product directly to high temperatures over 55°
- Do not place heavy objects on the camera.
- Avoid data or loss, do not place your Micro SD card near strong
magnetic.
- To extend the life of the camera, do not use it when the battery is
extremely low
C
4

Accessories
UHD 4 K
1. OK/Shutter
2. Micphone
3. Menu
4. Speaker
5. Micro USB
1 2 3
4
5 611 12 10
9 714 813 15
11. Working Indicator
12. Charge Indicator
13. Battery Cover
14. Memory Card Slot
15. Mounting Hole
6. Micro HDMI
7. Power
8. Front Screen
9. Lens
10. Rear Screen
5

Battery Charging and Installation
The battery and the camera are packaged separately, so please
make sure that the battery is charged with power, inserted into the
camera before turning the camera on.
A.Battery Charging
1. Please note the dual USB battery charger is not included in the
camera's accesories. You may need purchase one if you want.
2. Connect the camera with USB cable, you can charge it with
a power adapter or computer. Charging with computer may be slower
than with a power adapter due to output of computer USB ports.
3. When the camera is charging, the charging indicator on the left of
main screen will lights red. It will disappear if the battery is fully
charged.
6

SD Card Insertion and Formatting
A.SD Card Insertion and Out
· Find the Micro SD card slot in the camera, and insert the card into
the camera as the direction and push inside.
· SD card out: Press down the SD card until you' ve heard a insertion
sound; Then the SD card will pop out along with a pop sound.
12
3
7

B.SD Card Formatting
· Insert the micro SD card before turn on the camera.
· Turn on the camera, Press"Menu"button (or touch the "Setting"
icon on the bottom right corner of screen) to enter Setting menu.
· Find the "Format"setting item, select "SD card", press OK button,
to complete the format.
The camera supports regular brand micro SD card, Class 10 or above,
8GB to 128GB, please ensure the quality of micro SD card.
You must format the micro SD card on the camera before Using.
The V40A Camera has 4 modes: Video Mode, Photo Mode,
Playback Mode, Settings Mode. Below are the function instructions
of each button under these modes.
Press and hold on the "Power/Mode" button: Turn on the camera.
Press and hold on the "Power/Mode" button: Turn off the camera.
Turn ON/OFF
8

Under each mode.
Mode Operation Instructions
There are 4 mode options:Video Mode(Normal Video/Slowly Video/
Loop Video/Lapse Video),Photo Mode(Normal Photo/Auto Photo/
Burst Photo/Timer Photo), Playback Mode and Setting Mode.Short
press the Power/Mode Button to switch among the different
recording and shooting modes.
Press the Menu Button to enter the navigation menu, then press the
menu button again to switch the mode what you want, and press the
OK Button to confirm the selection.
6038
20MP
00:00:00/03:24:25
Slowly
1080P4X
TF
Switch the screen
Press and hold on the "Menu" button to switch the screen.
Photo
9

Set tings Tab le
Click the lower middle corner of the screen to switch between
video mode and photo mode.Click the lower right corner to enter
the system Settings menu.
Click the bottom left corner to enter the playback menu.
00001/00002
4608X3456
00001/00002
4K
Image
Rotation
Wi-Fi
Wi-Fi
Information
TurnOff
TurnOff
10

Vi de o S et tin g
Video Resolution:4K 30fps/2.7K 30fps/1080P 120fps/1080P
60fps/1080P 30fps/720P 240fps/720P 120fps/720P 60fps/
720P 30fps
The default resolution is 4K 30fps.
EIS:Off/On.
Choose to turn on/off the anti-shake function.
Loop Video:2 Min./3 Min./5 Min.
When this fonction is turned on,the video recorded will be segment-
ed at the time you set.
Time-Lapse Video: 0.5 Sec./1 Sec./2 Sec./5 Sec./10 Sec.
/30 Sec./60 Sec.
The video recorded will be compressed to the time length you set.
For example, an image of a scene may be captured once every
second, then played back at 30 frames per second; this is an appar-
ent 30 times speed increase.
Slow Motion:1080P 4X/1080p 2X/720P 8X/720P4X
Video Quality: High/Middle/Low
Rec Audio: Turn On/Turn Off
FOV: Turn Off/Wide/Middle/Narrow
You can choose angle of view according your needs.
Photo Resolution:20M/16M/13M/8M
Sharpness:High/Middle/Low
The higher the sharpness,the more detail.
Photo Setting
11
Table of contents
Languages:
Other CAMPARK Action Camera manuals