Cannon MX360 User manual

Setting Up Your MX360 or MX410
In Default Mode (Tel Priority Mode)
WithoutAn Answering Machine
Next

Connecting The Phone Lines
NextPrevious

(Existing Phone Cord)
Wall Jack Hand Set
(Phone)
Fax to Phone Line Connection
NextPrevious 3
Before
After
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 4
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the provided phone cord into the wall jack

Fax to Phone Line Connection
NextPrevious 5
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the provided phone cord into the “L” jack located on the rear of
the multifunction

Fax to Phone Line Connection
NextPrevious 6
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Remove the white plug (D) from the upper jack.

Fax to Phone Line Connection
NextPrevious 7
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the second phone cord into the “telephone” jack located on
the rear of the multifunction

Fax to Phone Line Connection
NextPrevious 8
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the second phone cord into the phone

Setting Up The Receive Mode
NextPrevious

Step 1
Turn on the MX360 or MX410 by
pressing the ON button.
Step 2
Press the FAX button.
NextPrevious 10
MX360 MX410

Step 4
Use the Left or Right Arrow button to
select “Receive mode set”.
Step 3
Press the Menu button
NextPrevious 11

Step 5
Press the OK button
Step 6
The “Receive mode set” screen will
appear
NextPrevious 12

Step 7
Use the Left or Right arrow button
to select “TEL priority mode”
Step 8
Ensure that “TEL priority mode” is
displayed
NextPrevious 13

Step 9
Press the OK button
Step 10
The “Make advanced settings?”
screen will appear
NextPrevious 14

Step 11
Use the Left or Right arrow button
to select “Yes”
Step 12
Ensure “Yes” is selected
NextPrevious 15

Step 13
Press the OK button
Step 14
The “TEL priority mode screen will
appear
NextPrevious 16

Step 15
Use the Left or Right arrow button
to select “User-friendly RX”
Step 16
Confirm “User-friendly RX” is
selected
NextPrevious 17

Step 17
Press the OK button
Step 18
The “User-friendly RX” screen will
appear
NextPrevious 18

Step 19
Use the Left or Right arrow button
to select “ON”
Step 20
Ensure “ON” is selected
NextPrevious 19

Step 21
Press the OK button
Step 22
The screen will return to the fax
standby screen. Your MX360 or
MX410 is now ready to receive a
fax
NextPrevious 20