Canon EOS 1300D User manual

EOS 1300D (W)
Wireless Function
Instruction Manual
INSTRUCTION
MANUAL
ENGLISH

2
By connecting to a Wi-Fi®network or other device supporting this
camera’s wireless functions, you can perform tasks such as sending
images or controlling the camera.
* Use the latest firmware.
Introduction
What You Can Do Using the Wireless Functions
(CANON iMAGE GATEWAY)
(3) Send images to a Web service
(1) Connect to a smartphone
(2) Save images to Canon
Connect Station*
CANON iMAGE GATEWAY web services are not supported in certain
countries and areas. For information on supported countries and areas,
refer to the Canon website (www.canon.com/cig).

3
Introduction
(1)qConnect to a smartphone (p.19, 41)
Connect the camera to a smartphone or tablet wirelessly and use
the dedicated application “Camera Connect” to operate the camera
remotely or view images stored in the camera.
In this manual and on the camera’s LCD monitor, “smartphone”
refers to smartphones and tablets.
(2)Save images to Connect Station (p.37)
Connect the camera to Connect Station (sold separately) wirelessly
to save images.
(3)mSend images to a Web service (p.61)
Share images with family and friends or share images using a range
of Web services via CANON iMAGE GATEWAY, an online photo 
service for Canon users (free registration required).
This camera supports NFC* which enables you to set up a connection
between the camera and a smartphone or Connect Station (sold
separately) easily. For details, see page 16.
* Near Field Communication
Easy Connection Using the NFC Function

4
This manual is structured so that you can read the required pages according
to the device to be connected and connection method. After registering a
nickname and learning the basic operations in Chapter 1, follow the diagram
below and see the corresponding pages according to your needs.
*1 Easy Connection: Connect the camera directly to each device.
*2 Wi-Fi Connection: Connect using a Wi-Fi access point.
Structure of This Manual
Easy Connection
*1
Wi-Fi Connection
*2
q
Smartphone Connect Station
q
Smartphone
m
Web service
Nickname Registration and Basic Operations (Chapter 1)
(Read these first.)
(Hereafter, read the required pages according to the device to be connected and
connection method.)
Easy Connection
to a Smartphone
(Chapter 2)
Easy Connection to
Connect Station
(Chapter 3)
Wi-Fi Connection to a
Smartphone (Chapter 4)
Wi-Fi Connection
to a Web Service
(Chapter 5)
Checking and Operating Connection Settings (Chapter 6)
Troubleshooting Guide (Chapter 7)
Reference (Chapter 8)
(Read as necessary.)

5
Chapters
Introduction
2
Preparation and Basic Operation
9
Easy Connection to a Smartphone
19
Easy Connection to Connect Station
37
Wi-Fi Connection to a Smartphone
41
Wi-Fi Connection to a Web Service
61
Checking and Operating Connection Settings
83
Troubleshooting Guide
89
Reference
105
1
2
3
4
5
6
7
8

6
2
1
3
4
Introduction 2
What You Can Do Using the Wireless Functions............................. 2
Structure of This Manual .................................................................. 4
Chapters........................................................................................... 5
Conventions Used in this Manual..................................................... 8
Preparation and Basic Operation 9
Registering a Nickname ................................................................. 10
Basic Operation and Settings......................................................... 13
NFC Function ................................................................................. 16
Preparation for Smartphones ......................................................... 18
Easy Connection to a Smartphone 19
Connection Method ........................................................................ 20
Connecting Automatically with the NFC Function .......................... 21
Connecting with Easy Connection.................................................. 24
Operating the Camera Using a Smartphone .................................. 28
Reconnecting ................................................................................. 30
Easy Image Transfer Using the NFC Function............................... 32
Easy Connection to Connect Station 37
Saving Images................................................................................ 38
Wi-Fi Connection to a Smartphone 41
Checking the Type of Access Point................................................ 42
Connecting via WPS (PBC Mode).................................................. 43
Connecting via WPS (PIN Mode) ................................................... 45
Connecting to a Detected Network Manually ................................. 48
Connecting to a Smartphone.......................................................... 51
Operating the Camera Using a Smartphone .................................. 54
Contents

7
Contents
5
6
7
8
Reconnecting ..................................................................................56
Specifying Viewable Images ...........................................................57
Registering Multiple Connection Settings .......................................60
Wi-Fi Connection to a Web Service 61
Preparation for Web Services .........................................................62
Checking the Type of Access Point ................................................64
Connecting via WPS (PBC Mode) ..................................................65
Connecting via WPS (PIN Mode)....................................................68
Connecting to a Detected Network Manually..................................71
Sending Images to a Web Service..................................................76
Reconnecting ..................................................................................80
Registering Multiple Connection Settings .......................................81
Checking and Operating Connection Settings 83
Checking, Changing, or Deleting Connection Settings ...................84
Clearing Wi-Fi Function Settings ....................................................87
Troubleshooting Guide 89
Responding to Error Messages ......................................................90
Troubleshooting Guide..................................................................100
Wireless Function Notes ...............................................................101
Checking Network Settings...........................................................103
Reference 105
Setting Network Manually .............................................................106
Setting IP Address Manually.........................................................108
Specifications................................................................................110
Wi-Fi (Wireless LAN) Precautions ................................................111
Index .............................................................................................113

8
In this manual, the terms “wireless” and “wireless LAN” are used as
general terms for Wi-Fi and Canon’s original wireless functions. 
The term “access point” indicates wireless LAN terminals (wireless
LAN access points, wireless LAN routers, etc.) that relay wireless
LAN connection.
Icons in this Manual
<6> : Indicates the Main Dial.
<W><X><Y><Z> : Indicates the <S>cross keys on the top,
bottom, left, and right.
<0> : Indicates the Setting button.
* In addition to the above, the icons and symbols used on the camera ’ s buttons
and displayed on the LCD monitor are also used in this manual when discussing
relevant operations and functionality.
(p.**) : Reference page numbers for more information.
: Warnings to prevent potential problems during operation.
: Supplemental information.
Conventions Used in this Manual
Note that Canon cannot be held liable for any loss or damage from
erroneous wireless communication settings for using the camera. In
addition, Canon cannot be held liable for any other loss or damage caused
by use of the camera.
When using wireless functions, establish appropriate security at your own
risk and discretion. Canon cannot be held liable for any loss or damage
caused by unauthorized access or other security breaches.

9
1
Preparation and Basic
Operation
This chapter describes how to register a nickname (for
identification) necessary for using the camera’s wireless
functions and the basic operations.

10
First, set the camera’s nickname (for identification).
When the camera is connected to another device wirelessly, the
nickname will be displayed on the device. Be sure to set a nickname
as otherwise you cannot set the wireless functions.
1
Select [Wi-Fi/NFC].
Under the [53] tab, select [Wi-Fi/
NFC], then press <0>.
2
Select [Enable].
Press the <Z> key to select
[Enable], then press <0>.
When this setting is selected for the
first time, a screen to register a
nickname is displayed. Press <0>
and proceed to step 3.
Registering a Nickname

11
Registering a Nickname
3
Enter a nickname.
For instructions on entering
characters, see the next page.
Enter any characters between 1 to 10
characters in length.
4
Exit the setting.
When you are finished, press the
<M> button.
Select [OK] on the confirmation
dialog and press <0> to return to
the menu screen.
The nickname can be changed later from the [General sett.] screen
(p.88).
By default, the camera name will be displayed for the nickname.

12
Registering a Nickname
Changing the entry area
Press the <Q> button to toggle
between the top and bottom entry
areas.
Moving the cursor
Press the <Y> <Z> keys in the top
area to move the cursor.
Entering text
In the bottom area, press the <S> cross keys or turn the <6> dial
to select a character, then press <0> to enter it.
You can check how many characters you have entered, and how
many more can be entered, by referring to [*/*] on the upper right of
the screen.
Deleting a character
Press the <L> button to delete one character.
Finishing the text entry
Press the <M> button to confirm what you have entered and
exit. If a confirmation dialog is displayed, select [OK] to exit.
Canceling the text entry
Press the <B> button to cancel text entry and exit. If a
confirmation dialog is displayed, select [OK] to exit.
Virtual Keyboard Operation

13
The basic operation for using the camera’s wireless functions is
explained here. Follow the procedures below.
1
Select [Wi-Fi/NFC].
Under the [53] tab, select [Wi-Fi/
NFC], then press <0>.
2
Select [Enable].
Press the <Z> key to select
[Enable], then press <0>.
When a nickname (for
identification) is not registered, a
registration screen is displayed.
See page 10 to register a nickname.
[Wi-Fi function] under the [53] tab is
now selectable.
When it is set to [Enable], all
connections via the DIGITAL and
HDMI terminals will be disabled.
[Eye-Fi trans.] will be set to
[Disable].
3
Select [Wi-Fi function].
Under the [53] tab, select [Wi-Fi
function], then press <0>.
Basic Operation and Settings

14
Basic Operation and Settings
4
Select the Wi-Fi function to
connect to.
Press the <Y> <Z> keys to select
an item.
When the connection settings are not
registered, the setting screen is
displayed.
When the connection settings are
already registered, the reconnection
screen is displayed.
For further connection settings, see the pages that correspond to the
device to be connected and connection method.
When using the NFC function, see page 16.
Set to [Enable] to enable the selection of [Wi-Fi function] under the
[53] tab.
When the use of electronic devices and wireless devices is
prohibited, such as on board airplanes or in hospitals, set it to
[Disable].
When it is set to [Enable], you cannot use the camera by connecting
it to Connect Station, a computer, printer, GPS receiver, TV set, or
other device with a cable (p.15).
When you want to prioritize the wireless connection, do not operate the
power switch, Mode Dial, card slot/battery compartment cover, or other
parts. Otherwise, the wireless connection may be terminated.
[Wi-Fi/NFC]
Using the Camera While Wireless Functions Are Active

15
Basic Operation and Settings
Wireless connection status can be checked with the camera’s <k>
lamp.
Wireless Connection Status
<k> lamp
Connection Status <k> lamp
Connected On
Sending data Blinking rapidly
Waiting for connection/
Waiting for reconnection Blinking slowly
Connection error
Blinking
somewhat
rapidly
Cable Connection Cautions
When [53: Wi-Fi/NFC] is set to [Enable], connection via interface cable
or HDMI cable is disabled. Set [53: Wi-Fi/NFC] to [Disable] before
connecting a cable.
When the camera is connected to Connect Station, a computer, printer,
GPS receiver, TV set, or any other device via a cable, settings for [Wi-Fi/
NFC] cannot be changed. Disconnect the cable before changing any
settings.
Cards
If there is no card in the camera, it cannot be connected wirelessly.
Additionally, for [m], the camera cannot be connected wirelessly if there
are no images saved on the card.
Using an Eye-Fi Card
When [53: Wi-Fi/NFC] is set to [Enable], image transfer using an Eye-Fi
card is disabled.

16
Using an NFC-enabled smartphone or Connect Station enables you to
do the following:
Touch a smartphone to the camera to easily connect them wirelessly
(p.21).
While playing back images on the camera, touch a smartphone to
the camera to send a captured image to the smartphone (p.32).
Hold the camera close to Connect Station (sold separately) to easily
connect them wirelessly (p.38).
When using the NFC function, follow the steps below to set the
camera’s NFC setting.
1
Select [Wi-Fi/NFC].
Under the [53] tab, select [Wi-Fi/
NFC], then press <0>.
2
Add [X] to [Allow NFC
connections].
Displayed when [Wi-Fi/NFC] is set to
[Enable].
Press the <B> button to add or
remove [X]. Add [X], then press
<0>.
When a nickname (for identification)
is not registered, a registration screen
is displayed (p.10).
NFC Function
What is NFC?
NFC (Near Field Communication) is a function that can exchange
information by simply bringing two NFC-enabled devices close together.
This camera uses the NFC function to exchange information regarding
wireless connection.

17
NFC Function
When establishing wireless communications using the NFC function,
see the following pages.
Connecting to a smartphone wirelessly: page 21*
Sending images to a smartphone: page 32*
Connecting to Connect Station: page 38
* When connecting to a smartphone, see pages 18 and 20 as well.
NFC Function Cautions
This camera cannot be connected to other NFC-enabled cameras or
printers using the NFC function.
A connection cannot be established using the NFC function while
shooting with the camera or when the Mode Dial is set to <k>.
To connect the camera to a smartphone using the NFC function, the
smartphone’s Wi-Fi function and NFC function must be enabled.
A connection can be established even when the camera’s power is in the
auto power off state. However, if a connection cannot be established, cancel
auto power off, then establish a connection.

18
To use [q] (Connect to smartphone), a smartphone on which iOS or
Android is installed is necessary. In addition, the dedicated application
Camera Connect (free of charge) must be installed on the smartphone.
Camera Connect can be downloaded from the App Store or Google
Play.
For the operating system versions supported by Camera Connect,
refer to the download site of Camera Connect.
When an NFC-enabled smartphone is touched to the camera before
installing Camera Connect, the download screen of Camera
Connect will be displayed on the smartphone.
Interface or functions of the camera and Camera Connect are
subject to change for firmware update of the camera or application
update of Camera Connect, iOS, Android, etc. In such a case,
features of the camera or Camera Connect may differ from sample
screens or operation instructions in this manual.
Preparation for Smartphones

19
2
Easy Connection to a
Smartphone
Connecting the camera to a smartphone enables you to
do the following:
• View images stored in the camera on a smartphone or save
viewed images to a smartphone.
• Operate the camera to take a picture or change camera
settings using a smartphone.
• Send images to a smartphone from the camera.
This section explains how to connect the camera
directly to a smartphone.
Install Camera Connect on the smartphone before setting
up a connection (p.18).
To connect using a Wi-Fi access point, see Chapter 4
(p.41).
The camera cannot be connected to a smartphone when the Mode
Dial is set to <k>.

20
When the smartphone is NFC-enabled: See page 21.
You can easily set up a connection using the NFC function.
When the smartphone is not NFC-enabled: See page 24.
Set up a connection by selecting [Easy connection].
Smartphones labeled with the pmark are NFC-enabled. Some
smartphones are not labeled with the pmark even if they are NFC-
enabled; if you do not know whether your smartphone is NFC-enabled,
contact the manufacturer of the smartphone.
Connection Method
A connection may not be established with the NFC function even if the
smartphone is NFC-enabled. In such a case, establish a connection using
the procedure in “Connecting with Easy Connection” (p.24) or “Wi-Fi
Connection to a Smartphone” (p.41).
NFC-enabled smartphones can also be connected by selecting [Easy
connection] or [Select a network].