manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Canon
  6. •
  7. Sport & Outdoor
  8. •
  9. Canon Creative park Zebra User manual

Canon Creative park Zebra User manual

This manual suits for next models

2

Popular Sport & Outdoor manuals by other brands

Tumbl Trak Downhill Incline Assembly instructions

Tumbl Trak

Tumbl Trak Downhill Incline Assembly instructions

MORPHO TRIMMYALP LIGHT 13MHRAQYLAC manual

MORPHO

MORPHO TRIMMYALP LIGHT 13MHRAQYLAC manual

Jumpking JK146PBY user guide

Jumpking

Jumpking JK146PBY user guide

Sportable Scoreboards SSB-3328DSP installation instructions

Sportable Scoreboards

Sportable Scoreboards SSB-3328DSP installation instructions

Hudora 76171 INSTRUCTIONS ON ASSEMBLY AND USE

Hudora

Hudora 76171 INSTRUCTIONS ON ASSEMBLY AND USE

Flybar POGO TRICK BOARD owner's manual

Flybar

Flybar POGO TRICK BOARD owner's manual

KICK Decagon Assembly instructions

KICK

KICK Decagon Assembly instructions

CHINESPORT Spa 01325 Use and maintenance manual

CHINESPORT Spa

CHINESPORT Spa 01325 Use and maintenance manual

Gared Pro Jam GP10G72DM Installation, operation and maintenance instructions

Gared

Gared Pro Jam GP10G72DM Installation, operation and maintenance instructions

southpaw enterprises 303104 instruction sheet

southpaw enterprises

southpaw enterprises 303104 instruction sheet

SKLZ QUICKSTER FUTSAL GOAL Getting started

SKLZ

SKLZ QUICKSTER FUTSAL GOAL Getting started

Cornilleau 200 X OUTDOOR manual

Cornilleau

Cornilleau 200 X OUTDOOR manual

Master MASTRAMP96-96 manual

Master

Master MASTRAMP96-96 manual

Playlife UT-2206 instruction manual

Playlife

Playlife UT-2206 instruction manual

Brunswick Metro installation manual

Brunswick

Brunswick Metro installation manual

Gill 2235 Install

Gill

Gill 2235 Install

AluSport EL118 RIGHT manual

AluSport

AluSport EL118 RIGHT manual

Harrod RUG-005 quick start guide

Harrod

Harrod RUG-005 quick start guide

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

Fold up for right-handed throwing;
fold down for left-handed throwing
Fold up for right-handed throwing;
fold down for left-handed throwing
Fold up for right-handed throwing;
fold down for left-handed throwing
Assembly Instructions : Three A4 sheets (No. 1 to No. 3)
Assembling the Zebra, Command Four, and Star boomerangs
* Note that liquid glue may cause warping. We recommend using a stick glue.
* After gluing the parts together, place the boomerang on a flat surface with a book or similar object placed
on top. Store the boomerang under the same conditions. Always retune the boomerang before throwing it.
Make an indentation on the tip of the top
surface and align with the middle surface.
Glue these surfaces together.
After gluing the top and middle surfaces
together, glue the bottom surface to the
glued assembly. Then flip the boomerang
upside and glue the tip.
After gluing the components together, to flatten the
boomerang, place it under some books and allow to
stand for some time. Before using it, tune the boomerang
as described on page 3 of the Assembly Instructions.
Middle surface
Top surface
Bottom surface
Glue the bottom surface
into position.
Fold back the tip located on the top
surface and glue into position.
name
Canon
Creative Park
Boomerang (Zebra)
1
Boomerang : Assembly Instructions
Assembling the Triangle boomerang
* Note that liquid glue may cause warping. We recommend using a stick glue.
* After gluing the parts together, place the boomerang on a flat surface with a book or similar object placed
on top. Store the boomerang under the same conditions. Always retune the boomerang before throwing it.
Fold each part up. Glue the wing surfaces together with surface A inserted between
surfaces B and C.
Attach wing 1 to wing 2.
As shown in the illustration, align the notches for each part, then
rotate the parts so that the grey triangles in the center align.
Attach wing 3. As shown in the illustration, align the notches for each part, then rotate the parts so that the orange triangles in the center align. This will form
a white triangle on the bottom surface. Complete assembly by gluing the wings in place while adjusting them to ensure that the colors beneath the triangles
are not visible.
Mate the notches.
Top surface Bottom surface
Fit the notch on wing 3 to the notch on wing 1. Rotate
the parts until the orange-colored sections match.
Rotate the parts so that the colors match the illustration.
Finished!
Boomerang : Assembly Instructions
Wing tip gauge
Tuning your paper boomerang before throwing it Hints for improving boomerang flight
Other fun things to try with a boomerang
(1) Fold along the fold lines on the bottom surface. Fold these in line with
the angle of the bottom flap gauge. Fold up for right-handed throwing;
fold down for left-handed throwing.
(2) With the top surface on top, place the boomerang on a desk or other
flat surface and gently bend up the tip of each wing in line with the
gauge. While doing so, ensure the center of the boomerang's bottom
surface remains in contact with the flat surface.
When you've learned how to catch the boomerang, see how many
times you can catch it out of ten throws.
Use a stopwatch to see how many times you can catch the boomerang
within 30 seconds or a minute.
Try throwing with one foot raised or catching the boomerang without
moving your feet.
Use something to mark a spot on the floor, then throw the boomerang
while standing above the mark to see how close to that mark you can
get it to fall. Assign points based on distance from the mark (for
example, 10 points if it lands on the mark and five points if it lands 30
cm from the mark). Challenge a friend to see who gets the most points
in five throws!
Scatter a few balloons around the room and compete with a friend to
see who can hit the most balloons. Try competing for points, assigning
more points for more distant balloons and fewer points for closer ones.
We recommend using paper craft boomerangs indoors only. Outdoors, the effects of
imperceptible breezes may affect flight characteristics, keeping them from returning
properly.
Don't throw boomerangs on streets or walkways used by vehicles or pedestrians.
Keep your surroundings in mind when throwing a boomerang to avoid striking people
or animals.
Be careful to ensure the boomerang flies only in the intended direction and won't veer
off-course and strike people or objects. Never throw the boomerang sidearm.
Retrieving your paper boomerang if it gets stuck in high places can be dangerous. Ask
an adult to help you retrieve your boomerang.
We recommend using goggles to protect your eyes when playing with your
boomerang.
Adults should carefully monitor small children playing paper boomerangs.
Fold Fold
Fold
Wing tip
Fold
Strong folds will tend to
give boomerangs short
flight distances; a less
pronounced fold will make
the boomerang fly farther.
If the tip points up, the
boomerang will fly high; if
the tip points down, it will
fly low.
Folding
angle
Raise the tip about this much
Flap gauge
(1) Hold the boomerang with its top along your thumb (face side), gripping
it with your thumb and positioning it all the way to the base of the
thumb.
(2) Hold the boomerang aloft beside your head and
throw it up, snapping your wrist to impart spin.
Throw it the way you would throw a paper airplane.
Move your hand forward rather than downward, as
if throwing a dart.
(3) When throwing the boomerang, aim at an imaginary
point slightly above eye level. Try to avoid aiming
for a point that's too high.
(4) If you threw the boomerang
correctly, it will return, spinning
counterclockwise if you're right-
handed or clockwise if left-handed.
(5) Gently catch the boomerang when it
returns, using both hands. If you
bend it while catching it, tune it
once again. Note that a paper boomerang will not return properly if
you throw it too hard. Keep practicing until you can use your wrist to
impart as much spin as possible.
Use the surface with no design printed on it as the top.
Tune the boomerang by bending the flaps down.
When bending the wing tips up, keep the surface with no design printed on it on top.
Throw the boomerang with the surface with no design printed along your thumb (face
side).
Tips for building a left-handed boomerang
Try this
Throw a paper boomerang, then measure the time it takes to return.
Consider how you can make the
boomerang fly for longer.
Use a paper punch to punch holes in the
wings of your paper boomerang. This
will create unique humming noises as it
flies. Experiment to get your boomerang
to make sounds you like best.
To make your paper boomerang fly
farther, attach a loop of cellophane tape
to the wing tips. When doing so, be
aware of your surroundings and be sure
to throw the boomerang in a spacious
area.
Once you've built a paper boomerang
that can fly long distances, try building
another one. Throw the first one, then
throw the second while the first one is still
in the air. Try to catch and throw the first
boomerang before the second one
returns, then do the same with the second
boomerang. See how long you keep
'juggling' your boomerangs. Think of
them as flying beanbags!
Punched hole
Punched hole
Cellophane tape
Cellophane tape
Paper boomerang warnings
Canon
CreativePark
Boomerang(Command Four)
CanonCreativeParkBoomerang(CommandFour)
Canon
CreativePark
Boomerang(CommandFour)
Canon
CreativePark
Boomerang (CommandFour)
CanonCreativeParkBoomerang(CommandFour)
Boomerang : Assembly Instructions