Cantonk KIR-2421K20 User manual

K20 Series Color Camera
Weatherproof IR Color Camera
Specification
Packing List
No Name Model Number
2. User Guide K20 Series 1
1.
Weatherproof IR Color Camera K20
1
Fra chiser：
Notes :
::
: Before providing po er for the
camera, please read this User Guide in
detail!
Do ot attempt to disassemble the camera.
If the camera ca ot work, please co tact
local fra chiser or our compa y.
Model KIR-2421K20 KIR-633K20 KIR-639K20
Pick up Element 1/4"SHARP 1/3"SONY 1/3"SONY
Effective Picture Elements
(H×V)
PAL:500(H)×582(V)
NTSC:510(H)×492(V)
PAL:500(H)×582(V)
NTSC:510(H)×492(V)
PAL:752(H)×582(V)
NTSC:768(H)×494(V)
Horizontal Resolution 420TV Li e 420TV Li e 540TV Li e
Minimum Illumination
0.01Lux 0.01Lux 0.001Lux
0Lux (with IR LED ON)
S/N Ratio More tha 48dB
Scanning System 2:1 i terface
Synchronous System I ter al, Negative sy c.
Auto Electronic Shutter NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/100,000s
Gama Characteristic 0.45
IR Distance
20 Meters (with ￠ 5X24PCS I frared LED)
IR Status
U der 10Lux by CDS
IR Po er On
CDS AUTO Co trol
Video Output 1Vpp, 75Ω
Auto Gain Control Auto
Po er /
//
/ Current DC12V(+/-10%)/350mA
Lens Board Le s 3.6mm/F2.0
Dimension (mm) 86(W) x60(H) x55(D)
Weight (g) 400
Storage Temperature -30~+60
℃ RH95% MAX
Operating Temperature -10~+45
℃ RH95% MAX

INTRODUCTION
Co gratulatio s o your purchase of this product.
This User Guide suits K20 series product. We adopt the
latest SONY/SHARP tech ical of se sor a d driver. The
most attractive characteristics are small a d easy hidde ,
suits the elevator a d corridor. I additio , it ow s the
characters of high
defi itio a d stability, stro g a ti-
jammi g, rich a d real color. Fixi g a d usi g this model
are co ve ie t too. It is very good for you to apply to your
CCTV system.
Please read this i structio ma ual carefully to e -
sure proper use of the product.
CONNECTING
BRIEF OF PRODUCT
*
* *
* Sensor (
((
( CCD )
))
)
Adopt SONY 1/3 " CCD Se sor.
Adopt SHARP 1/4 " CCD Se sor.
*
* *
* Auto Gain Control (AGC)
Built-i auto gai co trol (AGC) circuit. The color camera
ca get high defi itio picture i low Lux co ditio .
*
* *
* Auto Electronic Shutter (AES)
Built-i auto electro ic shutter fu ctio . The color
camera’s AES speed ca reach 1/100,000s.
*
* *
* Gama Characteristic
Camera Gama characteristic is 0.45.
*
* *
* Scanning Mode
NTSC or PAL mode.
*
* *
* Water Resistance
IP66.
DC12V Po er Supply
Mo itor
K20
TROUBLE AND SOLUTION
Li k wire rule ：
Po er
Video
Note :
: :
:
● Please ote the camera’s operati g temperature a d its usi g
e viro me t requireme t. Avoid usi g the camera at too high or
too low temperatures. The operati g temperature is -30~ + 60 ℃ .
(Recomme datory operati g temperature is -10~+45 ℃ .)
● Never make the camera face the su or bright object. Other-
wise, it will damage the CCD .
● Do ot mou t the camera ear by the radiator or heater.
1. No Picture after providing po er
. May be the power supply voltage ab ormity, please check the power
supply voltage a d pole whether exactitude .
. Please check all the co ecti g cable a d mo itors whether be co ected
correctly or ot .
2. The picture level direction have flo ing interference ripples
. May be caused by the power supply AC ripples, it eed filter the wave of the
power supply .
. Check the mo itor a d peripheral equipme ts used.
3. The picture background color changes continuously
. The fluoresce t lamp’s electromag etic field cause color roll. This is proper
phe ome o of the cameras.
. Reduce the fluoresce t lamp umbers or i crease the dista ce betwee the
camera a d the fluoresce t lamps ca improve it.
. Use power supply exter al sy c. camera ca solve it.
4. The picture smear too mass
. The power supply’s voltage u stable .
. Co ecti g cables ot co ect correctly or have high impeda ce.
The symbol is i te ded to alert the user to the prese ce of
The symbol is i te ded to alert the user to the prese ce of
importa t operati g a d mai te a ce (servici g)
I structio s i the literature accompa yi g the applia ce.
u i sulated ‘da gerous voltage’ withi the product’s
e closure that may be of sufficie t Mag itude to co stitute
a risk of electric shock to perso s.
Notes ：
：：
：
● The power supply must through safe attestatio . Its output voltage,
curre t, voltage polarity a d operati g temperature must match the
camera’s requireme t .
● Whe usi g the camera i the thu derbolt co ditio , please ote to
mou t A ti-thu der device or put off the power supply plug a d cable .
● I order to capture high quality pictures, the power supply’s cable a d
video output cable should ot be too lo g.
Video
DC12V
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
RISK OF ELECTRIC. DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF
FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.