Canvas ELLIS 168-0009-4 User manual

ELLIS TV STAND
MODEL NO. 168-0009-4
ASSEMBLY INSTRUCTIONS
Toll-free: 1–888–670–6684
IMPORTANT: Please read and understand this manual before beginning assembly of the
product, and make sure all parts are present. Compare parts with packaging contents
list. If any part is missing, or if you have any questions, contact the service centre at
1–888–670–6684 (toll free).

Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

3
IMPORTANT SAFETY INSTRUCTIONS
Table of Contents 3
Important Safety Instructions 3
Parts List 4
Assembly
6
19
Technical Specifications
19
Warranty
IMPORTANT: Retain for future reference, and read carefully.
• This product is intended for indoor use.
•The product should be placed on flat, horizontal ground.
• Any assembly or maintenance of the product must be carried out by adults only.
•Plastic bags can be dangerous. To avoid danger of suocation keep all bags
away from babies and children.
TABLE OF CONTENTS
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using this product.

4 MODEL NO. 168-0009-4
PARTS LIST
Trim - 3
Fixed shelf - 1
Upper side panel - 2
Upper side front rail - 2
Lower side front rail - 2
Upper back panel - 1
Lower left back panel - 1
Lower right back panel - 1
Lower middle back panel - 1
Adjustable shelf - 2
Middle adjustable shelf - 1
Bottom - 1
Left door - 1
Right door - 1
Upper left divider - 1
Lower left divider - 1
Lower right divider - 1
Upper right divider - 1
Lower left side panel - 1
Lower right side panel - 1
Top - 1
1
11
12
13
14
15
16
17
18
19
20
21
2
3
4
5
6
7
8
9
10
482mm
443mm

PARTS LIST
5
F
G
H
I
J
K
N
O
Cam bolt - 18
Double-end cam bolt - 4
Cam - 26
Wood dowel 7.8 x 30 mm - 32
Wood dowel 7.8 x 50 mm - 4
Wood dowel 7.8 x 20 mm - 9
Metal plate - 2
A
B
C
D
E
P
Q
R
S
Handle - 2
Screw 4 x 14mm - 2
Screw 4 x 25 mm - 12
Screw 5 x 50 mm - 10
Magnet - 2
Screw 3 x 16 mm - 28
Drawer connector - 24
Screw 3.8 x 35 mm - 2
Fabric strip - 2
Metal washer - 4
L
M
Hinge - 4
Screw 3.5 x 12 mm - 18
Support - 12
Glue - 3
T
U
W
V
X
Sticker - 26
Bolt M4 x 12mm - 4
Wall anchor - 2

6 MODEL NO. 168-0009-4
ASSEMBLY
•
•
•
•
HELPFUL HINTS
Read each section carefully before starting. It is very important that each step is performed in
the correct order. If these steps are not followed in sequence, assembly diculties will occur.
Make sure all parts are included. Most board parts are labelled or stamped on the raw edge.
Work in a spacious area, preferably on a carpet, near the place the unit will be located.
Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
• Identify, sort and count the parts before beginning assembly.
• Compression dowels should be tapped in with a rubber mallet.
• Slides have a lip on the right side only.
• Back panels provide stability and support. Unit may collapse without the back panel installed.
• Clean the product with your choice of furniture polish and a soft cloth. DO NOT USE harsh
chemicals nor abrasive cleaners.
• Move your new furniture carefully. Two people are needed to lift and carry the unit to its new
location.
• Never push nor drag your furniture (especially on a carpet).
Needed for assembly:
Rubber mallet Star-head
screwdriver
Flat-head
screwdriver
2 people
Important Note:
+/- on the cam should be positioned
as shown.
Do not overtighten the cam bolt.
1. 2. 3.
4. 5.
These illustrations show how the cam fastening system works.
160°~185°

7
Step 1
Step 2
ASSEMBLY
9
C
B
D
D
V
10
C
D
V
B
W
C
B D V W
W
C
B D
D
V W
Requires 9, B, C, D, V, W
Requires 10, B, C, D, V, W

Step 3
Step 4
ASSEMBLY
8 MODEL NO. 168-0009-4
11
A
K
L
9
B
11
Requires 11, A, K, L
Requires 9, 11, B
B
K
A L
11
x 2

9
Step 5
Step 6
ASSEMBLY
10
B
11
C
12
H
I
W
B
C W H I
Requires 10, 11, B
Requires 12, C, H, I, W
H

Step 7
Requires 13, C, H, I, W
Step 8
Requires 2, 19, E, F, W
ASSEMBLY
10 MODEL NO. 168-0009-4
C
13
W
H
I
19
2
F
W
C W H I
F
E
E
W
H

11
Step 9
Requires 9, 10, 12, 13, 19, G
Step 10
Requires 2, 8, A, E, F, W
ASSEMBLY
G
13
12
9 19
10
F
8
2
W
E
G
A F
A
E
W

Step 11
Requires 6, 7, C, W
Step 12
Requires 6, 7, 8, G
ASSEMBLY
12 MODEL NO. 168-0009-4
8
6
7
G
W
G
C
C
C
W
W
6
7

13
Step 13
Requires 8, 14, 15, 16, B
Step 14
Requires 3, 4, A, C, W
ASSEMBLY
A
W
3
4
B
A C
C
W
Select either the grey or
white colour to contrast
on the back panel. For
consistency, choose
the same colour facing
outwards for panel 14
and 15, please also
exchange panel 14 and
15.
490mm
8
14
B
15
16
x 2

Step 15
Requires 3, 4, B
Step 16
Requires 3, B
ASSEMBLY
14 MODEL NO. 168-0009-4
3
4 B
B
3
3
B
B
x 2

15
Step 17
Requires 1, 2, A, E, F, P, Q, R, W
Step 18
Requires 1, 5, B, C, W
ASSEMBLY
W
A
1
Q
R
F
2
P
P
W
E
A F P
Q R
B
W
E
1
5 B
W
C
C

Step 19
Requires 20, 21, J, K, N, O
Step 20
Requires 20, 21, K, X
ASSEMBLY
16 MODEL NO. 168-0009-4
20
N
J
K O
20
21
X
21
N
O J
K
J K N O
X
K
K

17
Step 21
Requires 17, 18, M
Step 22
Requires I, T
ASSEMBLY
T
T
I
I
°90
M
18
17
17
M
T
I

Requires R, S, U
Step 23
ASSEMBLY
18 MODEL NO. 168-0009-4
Step 24 Enjoy your furniture
WEIGHT LIMITS
Please make sure that all objects are
removed before moving the assembled unit.
The unit must be lifted by more than one person,
not dragged nor pushed. Failure to do so will
cause product damage, instability, product
collapse, and/or serious injury.
This unit has been designed to support the
maximum loads shown. Exceeding these load limits
could cause sagging, instability, product collapse,
and/or serious injury.
S
R
U
R U
S
88 lb 3 oz
(40 kg)
74 lb 15 oz
(34 kg)
20 lb 15 oz
(9.5 kg)
22 lb 0.7 oz
(10 kg)
22 lb 0.7 oz
(10 kg)

Dimensions (H x W x D)
Product weight
43.1 kg
95 lb
This CANVAS product carries a one (1) year warranty against defects in
workmanship and materials. Trileaf Distribution agrees to replace a
defective product free of charge within the stated warranty period,
when returned by the original purchaser with proof of purchase. This product
is not guaranteed against wear or breakage due to misuse and/or abuse.
19
TECHNICAL SPECIFICATIONS
WARRANTY
32 1/8 x 60 x 15 3/8"
81.6 x 152.2 x 39 cm