Panduit SN7VCM User manual

© Panduit Corp. 2017 INSTALLATION INSTRUCTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
V00029ML
Page 1 of 4
Net-Access Cable Management Panel
Part Number(s) : SN7VCM & SN8VCM
Tool List:
• 8mm Hex Driver
M5x0.8 x 10mm
Hex Head Screw
Qty: 8
CMP Panel
Stationary and expandable
Qty: 1
(Panel comes ready to Install in a
42RU high cabinet)
CMP Panel Mounting
Bracket Adapter
Qty: 2
CMP Panel
Installed on an
S-Type Cabinet
CMP Panel
Installed on an
N-Type Cabinet

© Panduit Corp. 2017 INSTALLATION INSTRUCTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
V00029ML
Page 2 of 4
Adjust CMP Panel to desired height (Panel comes ready to install in a 42RU cabinet)
45RU
51RU48RU
Remove and reinstall (3)
M5x0.8 x 10mm
Hex Head Screws
Torque to 5.1 ±0.6 N·M (45.0 ±5.0 in-lbs)
at desired height
(45RU, 48RU, or 51RU)
• For RU heights other than 42RU; Remove the (3) M5x0.8 x 10mm Hex Head Screws.
• Slide the top portion of CMP Panel up to desired postion and reinstall the (3) M5x0.8 x 10mm Hex Head Screws.

© Panduit Corp. 2017 INSTALLATION INSTRUCTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
V00029ML
Page 3 of 4
Install CMP Panel onto the Cabinet
• Attach (2) CMP Panel Mounting Brackets to the CMP Panel using (4) M5x0.8 x 10mm Hex Head Screws.
• The CMP Panel can be mounted anywhere along the cabinet side rail on either side of the cabinet.
• Attach the CMP Panel Assembly at desired location using (4) M5x0.8 x 10mm Hex Head Screws.
M5x0.8 x 10mm
Hex Head Screw
Qty. 4
M5x0.8 x 10mm
Hex Head Screw
Qty. 4
CMP Panel
Mounting Brackets
Qty. 2
CMP Panel

© Panduit Corp. 2017 INSTALLATION INSTRUCTIONS V00029ML
Page 4 of 4
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
[email protected]
Phone:
866-405-6654
www.panduit.com
Optional Accessories - not included
Install D-Rings in orientation shown.
(Reference Installation Instructions CM108B
and CM615C for further Information.)
Install L-Rings in orientation shown.
(Reference Installation Instructions CM615C
for further Information.)
Install Tak-Tys through lashings in CMP Panel.
123
Lashing CablesTak-Ty