Car-Interface.com CI-DAB-MMI2G User manual

www.car-interface.com
2. Start-up
3. Searching process
USER MANUAL
AUDI MMI 2G BASIC
1. Introduction
CI-DAB-MMI2G device is a DAB/DAB+ radio receiver. It is designed to receive
digital radio stations in vehicle equipped with digital sound system. CI-DAB-
MMI2G supports the "service following" function.
To start listening of digital radio stations from DAB/DAB+ radio receiver, press the
RADIO button 1 and next press the SOURCE button 2 on MMI control panel.
Then using main knob 3 of MMI2G system select Digital Radio DAB from list.
2
fig.1 fig.2
WARNING!
At first start up of device run a SCAN function to search new stations
and add them to list, using main knob of MMI2G system fig.3.
DAB+/DAB Radio for CAR
CI-DAB-MMI2G
3
1
1

www.car-interface.com
4. Selecting and changing
3.2. Searching process
fig.3 fig.4
After scan process finish, system shows list of available radio services fig.5.
Toselect next or previous service use main knob of MMI2G system or buttons
under the knob.
Sample list of available radio stations fig.5 fig.6
The CI-DAB-MMI2G device is equipped with the Service Following function for
automatic tracking of the selected radio station within the digital transmitters area
DAB/DAB+. An additional option is the ability to activate the function in the MMI unit
allowing automatic switching of the selected radio station to receive from FM
transmitters after DAB/DAB+ digital signal loss. Radio automatically will return to
digital reception when it recovers DAB/DAB+ signal. To enable the above-
mentioned function, run the SETUP function fig.7 and activate the Service Following
option fig.8.
fig.7 fig.8
5. Service Following