Car Solutions ROiK Octa User manual

- MODEL : ROiK Octa
ROiK Octa
- DATE : 2017.05.31
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

1. Main Spec.
OS : Android 5.1.1(Lollipop)
CPU : NXP5430Q - Cortex-A53 Octa Core @1.6Ghz Mali-400 MP4 GPU
Memory : 2GB DDR3 @800Mhz
NAND : 16GB (eMMC)
SD Card : 8GB (SDHC Class10, Max 32GB support, FAT32)
USB : USB2.0 High Speed Port x 2
Telecommunication : 802.11 b/g/n WiFi, Bluetooth 4.0
GPS : Ublox7
Touch : Resistor and Capacitive touch support both
RGB : 800x480 / 480x234
LVDS OUT : Digital 800x480 LVDS OUT
Speaker : 2W
FM Transmitter : 88.0Mhz~108.0Mhz
I/O : AV IN, StereoAudio Out
Voltage: DC 12V ~ 24V
Temperature : Storage -20 C ~ +80 C/ Operating -15 C ~ +70 C
Size: 122mm(W) x 88mm(H) x 23mm(D)
Weight : 184g
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

2. Dimension
146mm(W) x 88mm(H) x 23mm(D)
146mm
88mm
23mm
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

3. External Appearance - 1
POWERRGB OUT
GPS
DIP SW AV IN/OUT
USB2KEYMODE SWSD SLOT
DIGITAL
LVDS OUT
USB1
UARTWIFI/BT
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

4. External Appearance - 2
USB2 USB1KEYSD SLOT
DIGITAL
LVDS OUT
POWER RGB OUT DIP SWAV IN/OUT GPS WIFI/BTUART
MODE SW
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

5. Power Connector Pin Assignment
BAT(Battery Power)
GND
ACC 12V IN
1
2
31 2 3
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

6. RGB OUT Connector Pin Assignment
1 2 3 4 5 6 7
Red
Green
Blue
1
2
3
C-Sync
GND
NC
4
5
6
NC7
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

7. AV IN/OUT Connector Pin Assignment
531 97 151311 1917
642 108161412 2018
2321
2422
Speaker +
AUX OUT R
AUX OUT L
Capacitive Touch SCL
Capacitive Touch SDA
Capacitive Touch Interrupt
Touch X-
Touch X+
UART TX
UART RX
AVIN
NC
1
3
5
7
9
11
13
15
17
19
21
23
Speaker -
GND
GND
GND
Capacitive Touch 3.3V
Capacitive Touch Reset
Touch Y-
Touch Y+
MIC +
MIC -
GND
FMT ANTENA
2
4
6
8
10
12
14
16
18
20
22
24
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

8. Product Composition
GPS Box Power Cable AV Cable RGB OUT Cable
External GPS
Antenna
Capacitive
Touch Cable Resistor Touch Cable
Speaker
SD Card WiFi/BT
Antenna LVDS OUT
HDMI Cable
MIC
SD Card
Reader 1EA
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

9. DIP S/W Setting
* ON : DOWN, OFF : UP
ON1 2
ON1 2 3 4
PIN
1
2
OFF
DIGITAL LVDS OUT
ON
RGB OUT
Use Car GPS
Cable (Option)
Use External
GPS Antenna
PIN
1
2
3
4
OFF
Resistor Touch,
UART Touch
ON
Capacitive Touch
RGB 800x480 RGB 480x234
NC NC
Capacitive Touch
(GOODIX GT9XX)
Capacitive Touch
(ILITEK ILI2139DS)
* DIP S/W 2 Must ON
* USE DIP S/W4 when DIP S/W 1 is ON
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

10. DIP S/W Setting 2
Use UART or Resistor Touch
Use Capacitive Touch (GOODIX GT9XX)
DIGITAL LVDS OUT 800x480 (Block RGB Signal)
RGB 800x480
RGB 480x234
GPS Power OFF(Use car GPS Cable –Option)
GPS Power ON(Use External GPS Antenna–MUST ON)
ON1 2 ON1 2 3 4
ON1 2 ON1 2 3 4
ON1 2 ON1 2 3 4
ON1 2 ON1 2 3 4
ON1 2 ON1 2 3 4
ON1 2
ON1 2 ON1 2 3 4
ON1 2 ON1 2 3 4
Use Capacitive Touch (ILITEK ILI2139DS)
ON1 2 ON1 2 3 4
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

11. Install Manual - Capacitive touch
VIDEO
INTERFACE
RGB IN
ACC 12V
Capacitive touch
Speaker
GPS
AUX OUT (CAR)
VAV IN
L
R
+ -
Car battery
VIDEO
INTERFACE
LVDS IN
ON 1 2
* Digital LVDS OUT always on , DIP S/W 1 = OFF
* RGB OUT = DIP S/W 1 = ON
* Capacitive Touch = DIP S/W 1 = ON
ON1 2 3 4
Use Capacitive Touch
(Goodix GT9xx)
ON1 2 3 4
Use Capacitive Touch
(ILITEK ILI2139DS)
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

11-1. Capacitive Touch Setting (GOODIX GT9xx)
1.Run Device Setting app 2. Select Capacitive Touch Setting
3.Select adjust cap setting file 4. Waiting for reset device
* DIP S/W 1 = ON, DIP S/W 4 = OFF : Capacitive Touch Goodix GT9xx Model
DIP S/W 1 = ON, DIP S/W 4 = ON : Only Audi Q7 Capacitive Touch ILITEK ILI2139DS Model
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

12. Install Manual - Resistive touch
Resistor touch
VIDEO
INTERFACE
RGB IN
ACC 12V
VAV IN
L
R
+ -
Car Battery
VIDEO
INTERFACE
LVDS IN
ON 1 2
Speaker
* Digital LVDS OUT always on , DIP S/W 1 = OFF
* RGB OUT = DIP S/W 1 = ON
* Resistive Touch = DIP S/W 1 = OFF
ON1 2 3 4
Use Resistive Touch
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

13. Install Manual –UART touch
TX
RX
RX
TX
VIDEO
INTERFACE
RGB IN
ACC 12V
VAV IN
L
R
+ -
Car Battery
VIDEO
INTERFACE
LVDS IN
ON 1 2
Speaker
ROiK UART RX connect with UART TX
ROiK UART TX connect with UART RX
* Digital LVDS OUT always on , DIP S/W 1 = OFF
* RGB OUT = DIP S/W 1 = ON
* UART Touch = DIP S/W 1 = OFF
Use UART Touch
ON1 2 3 4
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

14. Calibration –Resistive touch
Push button 2~3 sec after booting
Calibration mode After calibration, push screen few second
* Capacitive touch panel no need set calibration
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

15. Device Settings
Analog RGB Setting (RGB Out Mode): RGB 800x480 or 480x234 screen
change size and position
Digital Out Setting (Digital Out Mode): LVDS screen change h/v position
FMT Setting : Setting FM frequency
External Speaker : Turn on/off external speaker
Softkey Position : Change HOME Menu button
position to Right or Left
Softkey Auto Hiding : Change HOME Menu button
automatic hiding funtion
Startup App : Select Startup APP
Touch Calibration : Set resistive touch calibration.
(No need to set Capacitive touch panel)
Set User Boot Logo : 800x480 Pixel Size
Initialization : Initialize Device Settings
Reset device : Reset Device
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

16. FMT Settings
FM Transmitter On/Off or select FM frequency.
Button + , - change FM frequency by 0.05Mhz FM.
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

17. User Logo Update
Set User Boot Logo Activate
1. On SD-Card Root folder exist “userlogo” file. (File type = BMP image file)
2. Run Device Setting App
3. Click ‘Set Use Boot Logo’ and reboot ROIK
If bmp file path is not on “/sdcard/userlogo”, and file name is not same,
‘Set User Boot Logo’ not activate
* userlogo = 800x480 pixel , 24bit bmp file
Hidden Menu
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua

18. User Logo Update –Logo File Format
userlogo = 800x480 pixel , 24bit bmp file
Carsolutions.com.ua
[email protected]
www.carsolutions.com.ua