Cardinal PL-HLKIT User manual

ASSEMBLY INSTRUCTIONS FOR PL-HLKIT
UNPACKING
Open package containing PL-HLKIT. You should have the following components:
ITEM PART NO. DESCRIPTION QTY
A 0046-B502-08 Stainless Steel Connecting Link 2
B 6013-0058 Stainless Steel 5/16-18 Elastic Stop Nut 2
C 6021-1234 Stainless Steel Socket-Head Shoulder Bolt 2
D 0046-B504-08 Stainless Steel Spacer 2
PREPARATION
The following tools are required to assemble the PL-HLKIT:
• 3/16 Allen wrench
• 1/2" open end, or box end, or combination wrench
ASSEMBLY
Referring to the figure below:
1. Attach the Connecting Links (A) to the PLXXX scale (Load Cell) using the Socket-Head
Shoulder Bolt (C), 2 Spacers (D) (1 on each side of the Load Cell) and 5/16-18 Elastic
Nut (B). Securely tighten using the 3/16 Allen wrench and 1/2 wrench.
2. Place the Yoke Pin into the Connecting Links (A) and then secure the Yoke Pin to the
Connecting Links (A) with the remaining Socket-Head Shoulder Bolt (C) and 5/16-18
Elastic Nut (B). Securely tighten using the 3/16 Allen wrench and 1/2 wrench.
0046-M503-O1 Rev C
12/04
A C
D
D
A
B
Link
(Not furnished with PL-HLKIT)
Load Cell
(Not furnished with PL-HLKIT)
Yoke Pin
(Not furnished with PL-HLKIT)
PLXXX Scale
(Not furnished with PL-HLKIT)

2

2

ASSEMBLY INSTRUCTIONS FOR PL-HLKIT
UNPACKING
Open package containing PL-HLKIT. You should have the following components:
ITEM PART NO. DESCRIPTION QTY
A 0046-B502-08 Stainless Steel Connecting Link 2
B 6013-0058 Stainless Steel 5/16-18 Elastic Stop Nut 2
C 6021-1234 Stainless Steel Socket-Head Shoulder Bolt 2
D 0046-B504-08 Stainless Steel Spacer 2
PREPARATION
The following tools are required to assemble the PL-HLKIT:
• 3/16 Allen wrench
• 1/2" open end, or box end, or combination wrench
ASSEMBLY
Referring to the figure below:
1. Attach the Connecting Links (A) to the PLXXX scale (Load Cell) using the Socket-Head
Shoulder Bolt (C), 2 Spacers (D) (1 on each side of the Load Cell) and 5/16-18 Elastic
Nut (B). Securely tighten using the 3/16 Allen wrench and 1/2 wrench.
2. Place the Yoke Pin into the Connecting Links (A) and then secure the Yoke Pin to the
Connecting Links (A) with the remaining Socket-Head Shoulder Bolt (C) and 5/16-18
Elastic Nut (B). Securely tighten using the 3/16 Allen wrench and 1/2 wrench.
0046-M503-O1 Rev C
12/04
A C
D
D
A
B
Link
(Not furnished with PL-HLKIT)
Load Cell
(Not furnished with PL-HLKIT)
Yoke Pin
(Not furnished with PL-HLKIT)
PLXXX Scale
(Not furnished with PL-HLKIT)