CardScan 700C User manual

1
Chapter
Getting Started with
CardScan Lead Qualifier

1Copyright © 2005 CardScan, Inc. All rights reserved worldwide. This guide is
protected by federal copyright law. No part of this guide may be reproduced or
distributed, transcribed, stored in a retrieval system, translated into any spoken
or computer language or transmitted in any form or by any means whatsoever
without the prior written consent of:
CardScan, Inc.
810 Memorial Drive
Cambridge, MA 02139
Tel: [phone]
Fax: [phone]
Trademarks: CardScan and CardScan.net are registered trademarks of
CardScan, Inc. Windows is a trademark of Microsoft Corporation. All other
trademarks are the property of their respective owners.
Disclaimer of Warranties: CardScan, Inc. makes no warranty, representation or
promise not expressly set forth in this agreement. CardScan, Inc. disclaims and
excludes any and all implied warranties of merchantability, title, or fitness for
a particular purpose. CardScan, Inc. does not warrant that the software or
documentation will satisfy your requirements or that the software and
documentation are without defect or error or that the operation of the software
will be uninterrupted.
LIMITATION OF LIABILITY: CardScan, Inc.’s aggregate liability, as well as
that of the authors of programs sold by CardScan, Inc., arising from or relating
to this agreement or the software or documentation is limited to the total of all
payments made by or for you for the license. This limited warranty gives you
specific legal rights. You may have others which vary from state to state. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.

Table of Contents
Getting Started with CardScan Lead Qualifier i
1 Welcome to CardScan Lead Qualifier!
Introducing Lead Qualifier Forms...................................................... 1-1
About this Booklet and Other Resources.............................................. 1-3
2 Scanning Forms and Completing Records
Scanning and Processing Forms ...................................................... 2-1
Verifying and Completing Records..................................................... 2-2
Viewing Records in Your File........................................................... 2-4
Reaching Leads from Summary View ................................................. 2-4
3 Organizing and Managing Leads
Organizing Leads with Categories..................................................... 3-1
Merging and Splitting Files ............................................................. 3-1
Finding Records with QuickSearch .................................................... 3-2
Finding and Removing Duplicates ..................................................... 3-3
Safeguarding Your Contacts ........................................................... 3-3
Keeping Contact Data Up to Date with AccuCard Service ........................... 3-3
4 Sharing Lead Data
Exporting Lead Data to Microsoft Excel ............................................... 4-1
Sharing Lead Records via CardScan.net.............................................. 4-3
Appendix A: Good Practices
Create and Practice Using CardScan.net Account ...........................................A-1
Prepare for Capturing Contacts without Business Cards ...................................A-1
Practice Using Forms ................................................................................A-1
Strategize! ...............................................................................................A-2
Prevent Scanning Trouble ..........................................................................A-2
Appendix B: Compliance with FCC and EC
FCC Statement ........................................................................................B-1
EC Declaration of Conformity ......................................................................B-1

ii CardScan, Inc.
This page is intentionally left blank.

Introducing Lead Qualifier Forms
Getting Started with CardScan Lead Qualifier 1-1
1 Welcome to CardScan Lead Qualifier!
Events, such as trade shows, conferences, and seminars are expensive but important vehicles for
showcasing your product or service and, most importantly, making new contacts! Too often those
new leads are not collected or acted on quickly enough. CardScan Lead Qualifier enables you to
maximize the value of your leads by allowing you to:
• Collect lead data with forms.
• Scan the forms into electronic records.
• Share the records with your team at remote locations.
Introducing Lead Qualifier Forms
Lead Qualifier forms allow you to capture not only the person’s business card (that is, contact)
information but also the data for qualifying this person as a lead. When you scan and process a
form, Lead Qualifier transforms the data as illustrated below.
Lead-Qualifier Form Electronic Record

1 Welcome to CardScan Lead Qualifier!
1-2 CardScan, Inc.
1As shown in the illustration, after processing:
• The business card data has been placed in the appropriate contact-information fields.
• The multiple-choice answers have been placed in the fields of the Form Data tab.
The only information not transformed automatically is your handwriting (for example, any notes in
the form’s MEMO, names of products and services, and your initials). You have to copy this data to
the fields by typing.
Because the form allows you to record so much data, Lead Qualifier alleviates the pressure on you
to enter the data into your computer as soon as possible. As a result, you can stay focused on the
opportunities presented by the event.
However, at big events, you may benefit from scanning and processing the forms the soonest
possible. This is because Lead Qualifier allows you to share lead data with your team remotely,
which further increases your efficiency at the event.
If you save lead records to your private account on the secure website CardScan.net, the team
members—given the password—can access this data from anywhere, at any time. This means the
opportunity to obtain prompt feedback and to delegate some tasks.
The tasks to perform in order to make the most of your leads may include:
• Verifying data accuracy and editing records
• Organizing records (for example, categorizing, finding and removing duplicates, etc.)
• Copying lead data to other applications, for example, exporting it to Microsoft Excel or
synchronizing with Microsoft Outlook.
Whether you do it yourself or delegate the work to others, CardScan Lead Qualifier minimizes the
effort by providing you with the features introduced in this booklet. The following section describes
this booklet and other Lead Qualifier resources.

About this Booklet and Other Resources
Getting Started with CardScan Lead Qualifier 1-3
About this Booklet and Other Resources
This booklet provides the basic instructions for using Lead Qualifier forms and suggests good
practices that may increase your efficiency. The following table summarizes your other resources.
CardScan Lead Qualifier
Installation and Setup
This document is included with the CD-ROM containing
the CardScan and Lead Qualifier software.
Getting Started with
CardScan
This booklet provides an overview of CardScan’s features
and describes the basics of scanning and managing data
with CardScan.
CardScan Online Help Use the online help for detailed descriptions of CardScan
features, instructions, and troubleshooting tips. For dialog
help, click Help on the dialog. The dialog help is displayed
in a tri-pane window, with tabs to display Contents, Index,
Search, and Glossary. You can also access the help by
pressing the F1 key on your keyboard or from CardScan’s
Help menu.
CardScan Website Visit www.cardscan.com for:
• Software updates
• Documentation downloads
• Knowledge Base, by Technical Support
CardScan Technical
Support
Contact our Technical Support, as follows:
Tel: [phone]
Fax: [phone]
http://www.cardscan.com
[email protected]
10:00 A.M. - 6:00 P.M. EST, Monday - Thursday
10:00 A.M. - 5:30 P.M. EST Friday

1 Welcome to CardScan Lead Qualifier!
1-4 CardScan, Inc.
1
This page is intentionally left blank.

Scanning and Processing Forms
Getting Started with CardScan Lead Qualifier 2-1
2 Scanning Forms and Completing Records
This chapter describes transforming a completed form into a usable record. This requires:
• Scanning and processing forms
• Verifying data accuracy, and editing the record for completeness
Scanning and Processing Forms
To scan and process the forms, you need a CardScan Executive scanner and a computer with the
CardScan Lead Qualifier software installed. If you cannot bring your scanner and computer to the
event, you can scan and process forms in your hotel room or even after you have returned to the
office.
If you have scanned business cards with CardScan before, the process of scanning forms may not
seem any different. The only difference—and a very important one—is in calibrating the scanner
correctly when you don’t have the standard calibration card.
NOTE: Your scanner’s accuracy depends on appropriate calibration. To calibrate
appropriately, use the CardScan Executive calibration card that came with the
scanner. If you don’t have this calibration card, use a form inserted into the
scanner with the blank side facing up.
To begin scanning forms:
1. On the desktop, choose Start→Programs→CardScan→CardScan.
2. If you are opening CardScan for the first time, follow the instructions to set up your scanner and
create your CardScan file.
3. Scan a form. This dialog appears:
4. Click Process. When CardScan finishes processing, it displays the record created last in Edit
view, along with the image of the business card, so you can verify the accuracy of the contact
information—as described in the following section.
You can choose to process the saved image or to
continue scanning and then process the scanned
images all at once. If you choose the latter, consider
using Batch Options. This feature allows you to begin
organizing your leads early, by assigning them to the
same category or by attaching the same note to all
records processed together. If you need assistance,
click Help and use the CardScan online help.

2 Scanning Forms and Completing Records
2-2 CardScan, Inc.
1Verifying and Completing Records
To verify the accuracy of a record, you should verify the contact data and the data recorded in the
fields of the form. Lead Qualifier simplifies your tasks by saving the image of the form as two
separate components: a) an image of the card affixed to the form and b) an image of the rest of the
form. When Lead Qualifier displays the record in Edit view, the window looks like this, prompting
you to verify data read from the business card:
1. Verify the accuracy of the lead’s contact data by comparing the data in the fields with the data
in the card’s image. As you move the cursor in the text, note a rectangle highlighting that text on
the image. Make sure you have reviewed fields and lines of text that may be hidden from view.
2. Check details of names and street addresses. Start by clicking either the Name or the Address
button in Edit view, and use the Check Card Details dialog.
Thecontactdisplayed
in the window is
highlighted in the
Contact List.
To display a different
contact, click the
name in the Contact
List.
Verify and
edit your
lead’s
contact data.
Click on the
Form Data tab
to verify and edit
data captured
fromthe fields of
the form.
Edit tab
• The button indicates an additional field or additional lines of text. When clicked,
the arrow changes to and the field opens.
• When the fields containing information are not visible, CardScan displays this
symbol . To view the hidden information, click directly above the symbol.
Pay attention to the following buttons:

Verifying and Completing Records
Getting Started with CardScan Lead Qualifier 2-3
3. To verify the accuracy of the form data, click on the Form Data tab to open its fields, and then
double-click anywhere on this tab (or choose View→Big Picture)to display the scanned image.
As you move the cursor from field to field, note a rectangle highlighting the corresponding part of
the image.
4. If the image contains any handwritten information, copy this information to the fields by typing.
When confident that the record is accurate, check the box labeled “Verified.”
If you don’t check the “Verified” box, CardScan Lead Qualifier will display warnings whenever you
try to use the record.This is to prevent you from applying features to inaccurate records.
Consider, for example, the importance of accuracy when using AutoActions in Summary view
(see “Reaching Leads from Summary View” on page 2-4).
Note the blank fields labeled for the
handwritten data. The Big Picture allows you to view all the images
included with the record.

2 Scanning Forms and Completing Records
2-4 CardScan, Inc.
1Viewing Records in Your File
Click the List view tab to view the contacts in your file.
Reaching Leads from Summary View
Double-click a lead in List view to display its contact data in Summary view; then use AutoActions to
create a preaddressed email, display the street address on MapQuest, dial a phone number, or
launch your browser to the lead’s website (as illustrated below).
AccuCard Status
(see page 3-3.)View All button
displays all
contacts in file
List view tab
Letter Bar
enables you
to list only
contacts that start
with the
same letter.
Contact List is
displayed with any
view (List, Edit, or
Summary). To hide
it, click
the button.
Number of Contacts
in File
Status Bar
Verification Status indicates
unverified contacts with the
symbol.
Choose
View
→ Customize
List to include any
lead-specific data (for
example, Lead
Follow-up) in the
display.
To start an autoaction, point at an
address or phone number, and click
when the cursor changes to the
appropriate symbol.

Organizing Leads with Categories
Getting Started with CardScan Lead Qualifier 3-1
3 Organizing and Managing Leads
CardScan Lead Qualifier provides you with powerful features to organize and safeguard your leads.
This chapter introduces:
• Organizing Leads with Categories
• Merging and Splitting Files
• Finding Records with QuickSearch
• Finding and Removing Duplicates
• Safeguarding your Leads
• Keeping Lead Records Up to Date
Organizing Leads with Categories
Categories allow you to organize contacts into meaningful groups. This helps you find records
quickly, select them for specific projects or simply for printing mailing labels, etc. For more
information, please consult the Online Help.
You can assign categories to:
• Individual leads, by opening the record in the Edit view, and
clicking the Categories tab
• Multiple leads, by selecting them in the List view, and
choosing Categories→Assign.
Merging and Splitting Files
Lead Qualifier allows you to open multiple files and to drag and drop records from one file to
another. These features enable you to merge and split files as needed. For example, to split a file
“Contacts” into two, follow these steps:
1. Choose File→Open, and open the file “Contacts.” The filename “Contacts” appears on the File
Bar.
2. Create the file “Contacts-2,” by choosing File→New. CardScan opens a blank file, and the
filename “Untitled” appears on the File Bar.
3. Choose File→Save As, and save file “Untitled” with the name “Contacts-2.”
4. Click Contacts on the File bar to switch to the file “Contacts,” and select contacts you want to
move to “Contact-2.”

3 Organizing and Managing Leads
3-2 CardScan, Inc.
15. Press and hold the mouse button until the cursor changes to the icon. Drag the mouse over
to the filename “Contacts-2” on the File Bar (as illustrated below).
6. Release the mouse button. The window displays “Contacts-2” with records copied from
“Contacts.”
7. Click “Contacts” on the File Bar to display the file “Contacts.” The copied records are still
selected.
8. Choose Card→Delete to delete the copied records from the file “Contacts.”
Finding Records with QuickSearch
You can search for contacts in any number of open files. On the QuickAccess Toolbar, the
QuickSearch component looks like this:
QuickSearch allows you to search by:
• Simply typing words from the contact you are looking for
• Specifying fields to be searched
• Combining words and fields
To refine your search, click the QuickSearch button, and use this dialog:
For refined searches, click this
button, and use the
QuickSearch dialog.
To repeat a word search
you have done before,
use this dropdown list
of previously used word
combinations.
To search with words included in
the contact, type the words.
Choose field to search.
Choose word
combinations
from the
dropdown list.
Type search words in box.
If multiple files are open, choose file
to search from the dropdown list.

Finding and Removing Duplicates
Getting Started with CardScan Lead Qualifier 3-3
Finding and Removing Duplicates
CardScan’s Duplicates Wizard finds records with duplicate information for you. It then helps you
remove duplicates automatically or as you choose. To start the Duplicates Wizard, choose
Card→Find Duplicates.
Safeguarding Your Contacts
To make sure your valuable information is safe and available when you need it, use the Backup
Wizard. To start the Backup Wizard, choose File→Maintenance→Backup.
Saving files to CardScan.net. The Backup Wizard allows you to save CardScan files to your
personal, secure account on CardScan.Net (www.cardscan.net). In addition to a secure and web-
accessible backup, you have the option to use the AccuCard Service (introduced next).
Keeping Contact Data Up to Date with AccuCard Service
The AccuCard Service emails your leads four times a year and asks them to review their contact
information as it appears in your file. (The information in the Notes is never revealed to your leads!)
Records with available updates are marked in List view with the symbol.
To review available updates, choose CardScan.Net→Review AccuCard Updates. The AccuCard
Updates Wizard opens and helps you quickly to review and accept or reject any updates.
For more information, please consult the Online Help.

3 Organizing and Managing Leads
3-4 CardScan, Inc.
1
This page is intentionally left blank.

Exporting Lead Data to Microsoft Excel
Getting Started with CardScan Lead Qualifier 4-1
4 Sharing Lead Data
CardScan Lead Qualifier provides you with various methods to share lead data. For example:
• If you send lead records via email to people with CardScan Lead Qualifier on their
computers, they can use these records as fully as you do. This method, of course, may not
be the most efficient or secure. For information on emailing contacts, use the Online Help.
• You can copy your records to Microsoft Outlook or to any other desktop application
supported by CardScan Synchronization. However, in order to copy all the form-data fields
to another application, you must edit the default field-mapping scheme for that application.
For information on CardScan Synchronization, use the Online Help.
• You can export lead records to Microsoft Excel, as described in this chapter.
• For maximum efficiency in teamwork, you may choose to share leads via a private, secure
account on CardScan.net—as mentioned on page 1-1. For a more extensive introduction to
using CardScan.net, see “Sharing Lead Records via CardScan.net” on page 4-3.
Exporting Lead Data to Microsoft Excel
CardScan’s Export Wizard includes a special template to enable you to export the data into a file
that Microsoft Excel can import.
To export Lead Data to Microsoft Excel, follow these steps:
1. Start CardScan, choose File→Data Exchange→Export. The Export Wizard screen opens:

4 Sharing Lead Data
4-2 CardScan, Inc.
12. Click Next. This screen opens:
3. Scroll down the list to select the appropriate template:
4. Click Next, and follow the wizard’s prompts to complete exporting the lead data.

Sharing Lead Records via CardScan.net
Getting Started with CardScan Lead Qualifier 4-3
Sharing Lead Records via CardScan.net
The ability to share lead records via your private account on CardScan.net can save you much time
and money. You can apply the power of your entire team to the project, while you are the only
person attending the event.
To take advantage of this feature, you must:
• Create an account on CardScan.net. To do so, choose Tools→Welcome Wizard, and
follow the on-screen prompts to create your account.
• Practice saving files to CardScan.net, opening files from CardScan.net, and synchronizing
CardScan.net files. For complete information and instructions, see Online Help.
NOTE: When viewing the file directly on CardScan.net, you will not be able to see the
form data fields. In order to view and edit entire records, you must synchronize
and work on the local copy. The following scenario illustrates this requirement.
Before using CardScan.net for an event, practice the following scenario:
1. You scan and process filled-out forms, and then save the file to CardScan.net.
2. The team opens the file from CardScan.net and saves a local copy.
3. The team works on the local copy to verify the accuracy and complete the records. It provides
feedback on any record in the Notes field.
4. The team synchronizes the file with CardScan.net.
5. You synchronize the files.
6. Review records completed by the team.
7. Check Notes for feedback. To find any feedback quickly, use QuickSearch and search the field
“Notes” (see “Finding Records with QuickSearch” on page 3-2).
NOTE: For more on sharing leads via CardScan.net, see “Appendix A: Good
Practices.”

4 Sharing Lead Data
4-4 CardScan, Inc.
1
This page is intentionally left blank.