Cashkeeper ZEUS User manual

USER MANUAL COINS MODULE ZEUS
ENGLISH
USER MANUAL
ZEUS MODEL (V0.2)
AUTOMATIC DRAWER FOR SAFE CASH MANAGEMENT

USER MANUAL COINS MODULE ZEUS
CONTENTS
1 PACKAGING CONTENT AND DIMENSIONS 3
1.1 Coin module box 3
1.2 Capabilities 4
2 EXPLODED VIEW 5
2.1 Coins Module ALU 5
2.1.1 Exploded view ALU 5
2.1.2 Functional elements 6
2.1.3 Connections 6
2.2 Coins Module NCK 7
2.2.1 Exploded view NCK 7
2.2.2 Functional elements 8
2.2.3 Connections 8
3 KEYS AND SECURITY 9
4 ELECTRICAL CHARACTERISTICS 10
4.1 Coin module 10
5 ASSEMBLY OF THE ANCHORING INTERFACE 11
5.1 ALU version 11
5.2 NCK version 14
6 MAIN COMPONENTS 17
6.1 Main components and functional elements 17
6.1.1 Front view 17
6.1.2 Rear view 17
6.1.3 Modular structure 19
6.1.3.1 Lid 19
6.1.3.2 Upper coin acceptance unit 20
6.1.3.3 Lower coin acceptance unit / Coin payment unit 20
6.2 Device status lighting 21
6.3 Lower locks and handle 23
6.4 Coin entry funnel 24
6.5 Coin validator and classification spiral 26
6.6 Hoppers and coin return tray 27
7 OPERATING INSTRUCTIONS 28
7.1 Starting the coin module 28
7.2 Turning the device On/Off 29
7.3 Opening and closing the lid of the device 30
7.4 Opening and closing the coin acceptance unit 31
7.5 Opening and closing the coin payment unit 34
7.6 Removal and reinstallation of a hopper 35
1/48

USER MANUAL COINS MODULE ZEUS
7.7 Filling the hoppers 37
7.8 Emptying the hoppers 38
7.9 Emptying the dust tray 39
8 ERROR AND WARNING CODES 40
9 INCIDENT MANAGEMENT 42
9.1 Removing jammed coins on the acceptance unit 42
9.2 Removing jammed coins on hoppers 43
10 WARRANTY 44
10.1 Terms and Conditions 45
10.2 Warranty conditions 45
10.3 Warranty will not be valid in the following cases 45
10.4 Warranty does not cover 46
10.5 Out of warranty expenses 46
10.6 How to make warranty effective 46
10.7 Limitation of Warranty 46
11 TECHNICAL SERVICE AND CUSTOMER SERVICE 46
2/48

USER MANUAL COINS MODULE ZEUS
1 PACKAGING CONTENT AND DIMENSIONS
THE MACHINE COMES FIXED, PALLETIZED AND PLASTICIZED WITH A SEMI EUROPEAN
PALLET (600x800 mm).
1.1 Coin module box
ALU VERSION
NCK VERSION
1 COIN MODULE ALU
1 COIN MODULE NCK
1 MODULE BASE
-
1 POWER SUPPLY + POWER CABLE
1 POWER SUPPLY + POWER
CABLE
1 TEXTILE COVER
-
1 KEY SET
1 KEY SET
CERTIFICATE OF GUARANTEE AND
DOCUMENTATION
CERTIFICATE OF GUARANTEE
AND DOCUMENTATION
Dimensions:
407x516x368 mm
Dimensions:
400x509x320 mm
Weight ALU version: 38 kg Weight NCK version: 30 kg
* In case of missing any of the items specified in the above list, contact your dealer
immediately. Any claim for lack of items, will not be taken into consideration after 24 hours of
receiving the product.
3/48

USER MANUAL COINS MODULE ZEUS
1.2 Capabilities
The coin recycling module consists of 8 small containers, called "hoppers", each containing a
type of denomination of coins.
4/48

USER MANUAL COINS MODULE ZEUS
2 EXPLODED VIEW
2.1 Coins Module ALU
2.1.1 Exploded view ALU
1. External cover ALU
2. Structure
3. Rear panel
4. Anchoring interface
5. Sliding tray (contains electronic board)
6. Swing door Level 1
7. ON / OFF switch
8. Validator + Coins Recycler
9. Power supply + Schuko cable
5/48

USER MANUAL COINS MODULE ZEUS
2.1.2 Functional elements
1. Coin input
2. Led 1 (Coin input information)
3. Safety Lock Level 1
4. Coin output
5. Led 2 (Coin output information)
6. Informative screen TFT 5 ”
2.1.3 Connections
Back panel connections:
6/48

USER MANUAL COINS MODULE ZEUS
2.2 Coins Module NCK
2.2.1 Exploded view NCK
1. NCK Structure
2. PCB housing
3. Sliding tray (contains the electronic board)
4. Pivoting door
5. ON / OFF switch
6. Validator + Coins Recycler
7. Power supply + Cable Schuko
7/48

USER MANUAL COINS MODULE ZEUS
2.2.2 Functional elements
1. Coin input
2. Led 1 (Coin input information)
3. Lock Level 1
4. Coin output
5. Led 2 (Coin output information)
6. Informative screen TFT 5 "
2.2.3 Connections
Back panel connections:
8/48

USER MANUAL COINS MODULE ZEUS
3 KEYS AND SECURITY
In order to offer you the greatest security for your money, each CK+ device has several locks
and up to 3 levels of security:
1. Main door access to the coin module (level 1). The key is turned 45º
to its left and the door is tilted forward.
To access levels 2 and 3, you must slide the module completely out. This way you can open the
upper doors without interference.
2. Opening of the coin validator (level 2). Turn the key 45º to the left
and press the blue button.
3. Opening of the coin recycler (level 3). The key is turned 45º to the left
and the lidlifted.
There is the possibility of mastering the locks. For more information on master key
combinations and prices contact your dealer.
Both in this manual and in all the documentation related to CashKeeper®, whenever necessary,
the level of security that, in each operation, can be compromised will be indicated. For this
reason, there is a specific nomenclature to supply this information:
9/48

USER MANUAL COINS MODULE ZEUS
4 ELECTRICAL CHARACTERISTICS
4.1 Coin module
The device must be connected to a network outlet with the following characteristics:
Supply voltage of the external source: 200 - 240V 50Hz
Voltage Power supply of the module: 24V DC
Maximum consumption: 6.2 A
The fixed installation must be equipped with power disconnection.
Keep the equipment away from water or other liquids.
Due to the characteristics of the system and for its safety, there must be a ground connection in
optimal conditions. Otherwise, do not use this device.
10/48

USER MANUAL COINS MODULE ZEUS
5 ASSEMBLY OF THE ANCHORING INTERFACE
The module must be anchored to the furniture that supports it through the base
destined for that purpose. If you do not do it, when you open it you can turn
forward.
5.1 ALU version
Order
Description
Image
1
Open the
Methacrylate
door with the
Level 1 key.
The front
panel tilts
forward about
20º.
2
Slide the tray
forward until it
stops.
R: Indicates
Right view
(from the front)
L: Indicates Left
View (from the
front)
3
Disconnect the
cables from the
wiring area on
the back of the
tray.
Left: Ethernet
Input + Power.
Right: Ethernet I
and II outputs.
11/48

USER MANUAL COINS MODULE ZEUS
4
Slide together the
levers of the guides,
right and left. One
down and the other
up.
5
Remove the tray
from the structure.
6
Fix the structure to
the counter by
means of 4
screws> M6x16
mm
7
Reinsert the tray in
its guides, until the
levers "click".
FACE IT
CORRECTLY.
12/48

USER MANUAL COINS MODULE ZEUS
8
Slide again and at
the same time
levers of the guides,
right and left. One
down and the other
up.
9
Reconnect the 4
cables on the back of
the tray.
ATTENTION! In view
R, make sure to put
the cable with the I
mark on the I
connector and the
cable with the II
mark on the II
connector.
10
Close the tray
gently, swing the
door backwards and
lock it with a key 1.
13/48

USER MANUAL COINS MODULE ZEUS
5.2 NCK version
ONLY TO BE FITTED INTO A FURNITURE.
Order
Description
Image
1
Open with the
key of Level 1.
The front panel
tilts forward
about 20º.
2
Slide the tray
forward until it
stops.
D: Indicates
Right view (from
the front)
I: Indicates Left
View (from the
front)
3
Disconnect the
cables from the
wiring area on the
back of the tray.
To the left and
right.
Left: Ethernet
Input + Power
Right: Ethernet I
and II outputs.
14/48

USER MANUAL COINS MODULE ZEUS
4
Remove the
module from
the structure.
Slide at the same
time levers of the
guides, right and
left. One down and
the other up.
5
Remove the
sliding tray from
the structure.
6
Insert the
structure to the
correctly sized
piece of
furniture.
7
Screw the
structure to the
upper, lower and
rear side parts with
minimum screws
M6x16 mm.
15/48

USER MANUAL COINS MODULE ZEUS
8
Re-insert the
tray into its
guides, until the
levers "click".
FACE IT
CORRECTLY.
9
Slide together
the levers of the
guides, right and
left. One down and
the other up.
10
Reconnect the 4
cables on the back
of the tray.
ATTENTION! In
view D, make
sure to put the
cable with the I
mark on the I
connector and
the cable with
the II mark on
the II connector.
11
Close the tray
gently, swing the
door back and
close it.
16/48

USER MANUAL COINS MODULE ZEUS
6 MAIN COMPONENTS
Description of main components and locations.
6.1 Main components and functional elements
6.1.1 Front view
1Lid for future applications.
2Status lighting: operating status of the device.
3Coin entry funnel.
4Lock 2: open the payment unit.
5Lock 3: push button on the lid of the device.
6Button: open the lid / coin acceptance unit.
7Status lighting: coin return tray.
8Handle: open the device (payment unit).
9Coin return tray.
Fig. 1: Front view: functional elements
6.1.2 Rear view
1Product label (not shown).
2On / Off switch.
3Lid for future applications.
4Interface: PC (USB standard B).
5Interface: Power.
6Slots for fastening with hooks.
17/48

USER MANUAL COINS MODULE ZEUS
Fig. 2: Rear view: functional elements
1Lid.
2Higher acceptance unit.
3Lower acceptance unit.
4Payment unit.
Fig. 3: Layered structure
18/48

USER MANUAL COINS MODULE ZEUS
6.1.3 Modular structure
• Lid with:
- Coin entry funnel
- Drive elements such as lock, push button, handle
• Coin acceptance unit in 2 layers (locked with key, accessible only by authorized personnel)
with:
- Centrifugal disc
- Coin conveyor
- Coin validator
- Spiral and coin sorting ducts
• Payment unit (locked with key, accessible only by authorized personnel):
- Hoppers
- Coin return tape
- Coin output tray
- Locks
6.1.3.1 Lid
1Dust tray.
2Lever for open switch of the device.
3Validator arm.
4Bayonet mount lever.
Fig. 4: Device with the lid open showing the top acceptance unit from above
19/48