Casio EX S12 - EXILIM CARD Digital Camera User manual

Digital Camera
User's Guide
E
/
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User's Guide.
• Keep the User's Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
To go to "Getting the Most Out of Dynamic Photo" click here!

i
" k
@i ii !! ....
You can take a memory card that contains the images you
want to print to a professional print service and have them
)tinted.
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print
images directly from a memory card. For details, see the user
documentation that comes with your printer.
ConnectingprinterDirectly to a PictBridge Compatible
You can print on a printer that supports PictBridge (page
118).
After transferring the images to your computer, use
commercially available software to print.
• You can specify which images you want to print, the number of copies, and date
stamp settings before printing (page 120).
117 Printing

YoucanconnectthecameradirectlytoaprinterthatsupportsPictBridgeandprint
imageswithoutgoingthroughacomputer.
•To set up the camera before connecting to a printer
1. Turn on the camera and press [MENU].
2. On the "Set Up" tab, select "USB" and then press [,].
3. Use [A] and [V] to select "PTP (PictBridge)", and then press [SET].
•Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the
camera to connect the
camera to your printer's
USB port.
• The camera does not
draw power over the
USB cable. Make sure
the camera's battery is
sufficiently charged
before connecting.
• Make sure that you
insert the cable
connector into the USB/
AV port until you feel it
click securely into place.
Failure to insert the
connector fully can result
in poor communication
or malfunction.
USB cable
Large connector
USB/AV port
USB port
i--
Making sure that the • mark on
the camera is aligned with the •
mark ofthe USB cable connector,
connect the cable to the camera.
Small connector
• Note that even while the connector is fully inserted, you still
will be able to see the metal part of the connector as shown
in the illustration.
• When connecting the USB cable to a USB port, make sure
you align the connector correctly with the port.
118 Printing

•To print
1. Turn on the printer and load paper.
2. Turn on the camera.
This will display the print menu screen.
3. Use[A] and [V] to select "Paper Size", and
then press [,].
4.
.
Use [A] and [V] to select a paper size and
then press [SET].
• The following are the available paper sizes.
3.5"×5", 5"×7", 4"×6", A4, 8.5"×11", By Printer
• Selecting "By Printer" prints using a paper size selected on the printer.
• See the documentation that comes with your printer for information about
paper settings.
Use [A] and [V] to specify the print option you want.
1 Image :Prints one image. Select and then press [SET]. Next, use [,] and
[1_] to select the image you want to print.
DPOF Printing:Prints multiple images. Select and then press [SET]. With this
option, images will be printed in accordance with DPOF settings
(page 120).
• To toggle date stamping on and off, press [BS]
(1). The date stamp will be printed when "On" is
indicated on the monitor screen.
.Use [A] and [V] to select "Print" and then
press [SET].
Printing will start and the message "Busy... Please
wait..." will appear on the monitor screen. The message will disappear after a
short while, even though printing is still being performed. Pressing any camera
button will cause the printing status to re-appear. The print menu screen will re-
appear when printing is complete.
• If you selected "1 Image", you can repeat the procedure from step 5, if you
want.
7. After printing is complete, turn off the camera and disconnect the USB
cable from the printer and camera.
119 Printing

•Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy,
and time stamp on/off information on the memory card with the images.
After configuring settings, you can use the memory card to print on a home DPOF
printer that supports DPOF or take the memory card to a professional print
service.
• Whether or not you will be able to use DPOF settings for printing depends on the
printer you are using.
• Some professional print services may not support DPOF.
•Configuring DPOF Settings Individually for Each Image
[r_-I] (PLAY) --_ Snapshot Screen ---_ [MENU] ---_ PLAY Tab ---_
DPOF Printing --_ Select images
1. Use [,] and [_.] to scroll through the files until the image you want to
print is displayed.
.Use [A] and [V] to specify the number of copies.
You can specify avalue up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] (ll) so "On" is shown
for date stamping.
• Repeat steps 1 and 2 to configure settings for other images, if you want.
3. Press [SET].
120 Printing

•Configuring the Same DPOF Settings for All the Images
_p_r
[i-_'-I] (PLAY) ---_ Snapshot Screen ---_ [MENU] ---_ PLAY Tab ---_
DPOF Printing ---_ All images
.Use [A] and [V] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] (1) so "On" is shown
for date stamping.
2. Press [SET].
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF
settings you configured for the images. To clear DPOF settings, specify "00" for the
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it
includes DPOF settings for the images to be printed and the number of copies. If you
don't, the print service may print all the images without regard to your DPOF settings,
or they may ignore your date stamp setting.
121 Printing

•Date Stamping
You can use one of the following three methods to include the recording date in the
3rintout of an image.
Configure DPOF settings (page 120).
You can turn date stamping on and off each time you print.
You can configure settings so some images include the date
stamp and some don't.
Configure the Camera's Time Stamp setting (page 156).
• The camera's Time Stamp setting imprints the date into a
snapshot when you shoot it, so the date is always included
when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that
includes a date stamped with the camera's Time Stamp
function. Doing so can cause the two stamps to be
overprinted.
You can use commercially available image management
software to date stamp images.
Request date stamping when ordering prints from a
>rofessional print service.
•Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association
(CIPA). You can connect the camera directly to a printer that supports
PictBridge, and perform image selection and printing using the
camera monitor screen and controls.
• DPOF support PRINT Image Matching III
Using image editing software and printing on a printer that supports
PRINT Image Matching III makes it possible to use information about
shooting conditions that is recorded with the image, and produce
exactly the type of image you want. PRINT Image Matching and
PRINT Image Matching III are trademarks of Seiko Epson Corporation.
• Exif Print
Printing on a printer that supports Exif Print (Exif 2.2) uses
information about shooting conditions recorded with the image to
enhance printed image quality. Contact your printer manufacturer
for information about models that support Exif Print, printer upgrades, etc.
o_°_
122 Printing

Youcanperformtheoperationsdescribedbelowwhilethecameraisconnectedtoa
computer.
Saveimagestoa
computerand
viewthemthere
Transferimages
storedonyour
computerto
cameramemory
Playback and
edit movies
Transfer
document data to
the camera
Windows only
• Save images and view them manually
(USB connection) (pages 125, 134).
• Transfer images to a computer
automatically over a wireless LAN for
viewing (Eye-Fi)(page 139).
In addition to images, you also can transfer
screen shot images from your computer to
the camera (Photo Transport _-)(page 131).
• You can play back movies (pages 129,
137).
• To edit movies, use commercially
available software as required.
You can transfer screen shots of documents,
digital books, web pages, and more to
camera memory and take them along
anywhere (CASlO DATA TRANSPORT)
(page 143).
The procedures you need to perform when using the camera with your computer and
when using the bundled software are different for Windows and the Macintosh.
• Windows users should refer to "Using the Camera with a Windows Computer"
on page 124.
• Macintosh users should refer to "Using the Camera with a Macintosh" on page
134.
123 Using the Camera with a Computer

Install the required software in accordance with the version of Windows you are
running and what you want to do.
Save images to a
computer and view Vista /XP /2000 Installation not required. 125
them there manually
Installation not required.
• Windows Media Player,
which is already installed
on most computers, can
be used for playback.
• If your computer is running 129
Play movies Vista /XP /2000 Windows 2000 and does
not have DirectX 9.0c or
higher installed, download
DirectX from the Microsoft
DirectX site and install it
on your computer.
Edit movies Vista /XP /2000 • Use commercial software -
as required.
Upload movie files Vista /XP (SP2/SP3) /YouTube Uploader for 129
to YouTube 2000 (SP4) CASlO •
Transfer images to Vista /XP /2000 Photo Transport 1.0• 131
the camera
Transfer document CASlO DATA TRANSPORT
Vista /XP /2000 143
data to the camera 1.0
Adobe Reader 8
Viewthe User's Vista/XP(SP2/SP3)/ (Not required if already 133
Guide 2000 (SP4) installed.)
YouTube Uploader for CASIO and Photo Transport will not run under 64-bit versions of
Windows Vista.
B124 Using the Camera with a Computer

•Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. See the
"Read me" file that comes with each application for details. Information about
computer system requirements also can be found under "Computer System
Requirements for Bundled Software" on page 176 of this manual.
•Precautions for Windows Users
• Except for Adobe Reader, the bundled software requires Administrator privileges to
run.
• Operation on a self-made computer is not supported.
• Operation may not be possible under certain computer environments.
_Viewing and Storing Images on a Computer
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
•To connect the camera to your computer and save files
1. Turn on the camera and press [MENU].
2. On the "Set Up" tab, select "USB" and then press [,].
3. Use [A] and [V] to select "Mass Storage", and then press [SET].
125 Using the Camera with a Computer