Casio Exilim EX-FH100 User manual

CAS|O
Digital Camera
EX-FH1OO
User's Guide
E
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User's Guide.
• Keep the User's Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXlLIM
Website at http:!/www.exilim.com/

,_ iJl
See page 28 for the procedure for viewing snapshots.
1. Press [1"_-I] (PLAY) and then use [,] and [_.] to display the movie you
want to view.
2. Press [SET] to start playback. Movie icon: []
Recording time
Image quality
Movie Playback Controls
[4] [1_] (Playback in progress.)
• Each press of either button increases the speed of the
fast forward or fast reverse operation.
• To return to normal playback speed, press [V].
[SET]
[4] [1_] (Playback paused.)
• Holding down either button scrolls continuously.
Press [V] and then press [A] [V]
• Volume can be adjusted only while movie playback is in
progress.
[A] (DISP)
Slide the zoom controller in the direction of I-,_-](o,.).
• You can use [A], [V], [4], and [1_] to scroll the zoomed
image on the monitor screen. You can zoom a movie
image up to 4.5 times normal size.
[MENU]
• Playback may not be possible for movies not recorded with this camera.
108 Viewing Snapshots and Movies

iiiiiii{i
Each time you perform a continuous shutter (CS) operation, the camera creates a CS
group that includes all of the images for that particular CS session. You can use the
following procedure to play back the images in a particular CS group.
/. Press [1"_-I] (PLAY) and then use [,] and [_.] to display the CS group
whose images you want to view.
Number of ima( CS group icon
the CS group
image in the CS group
2. About one second after you select a CS group, high speed playback of
its images will start automatically.
• After playback of a CS Group is complete, the first image of the group will be
displayed on the monitor screen.
• Pressing [SET] will pause playback. While playback is paused, you can adjust
the playback speed, specify the playback direction, scroll forward or back,
zoom images, and delete images.
CS speed
Current image number/number
of images in the group
Playback guide
109 Viewing Snapshots and Movies

The following are operations that are supported after you press [SET] to
start image playback.
/!llitiii/liiilii/!i! Ii/illl
///t!!l!!i1!t!I1tii
ii lli iiiiiiillii!!liliiiili!!!i
iii! i:!ii
During playback, changes the playback direction and playback speed.
While playback is paused, scrolls forward or back.
• Playback speed cannot be adjusted while the displayed image is
zoomed.
Toggles between pause and play.
Zooms the image.
• You can use [A], [V], [,], and [1_]to scroll the zoomed image on
the monitor screen.
• Sliding the zoom controller towards I-,_-](o_) while an image is not
zoomed will display a menu of images in the current CS group.
Exits CS group playback.
Cycles through information display formats.
i[_' i ! Displays the "CS Frame Edit" menu.
_NOTE
• Multiple images shot using normal-speed continuous shutter are stored individually
and are not grouped. This means they can be displayed individually (page 28) but
not as a CS group.
_Deleting Continuous Shutter Images
You can use the following procedures todelete imageswhile playback is in progress
or paused.
•Deleting a Specific CS Group File
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [V].
This will display the "CS Frame Edit"menu.
2. Use[A] and [V] to select "Delete" and then press [SET].
110 Viewing Snapshots and Movies

3. Use[<] and [b'] to display the image you want to delete.
4. Use[A] and [V] to select "Delete" and then press [SET].
•To delete other files, repeat steps 3 and 4.
• To exit the delete operation, press [MENU].
•Deleting Multiple Files in a CS Group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [V].
This will display the "CS Frame Edit"menu.
2. Use[A] and [V] to select "Delete" and then press [SET].
3. Use [A] and [V] to select "Delete Frames" and then press [SET].
• This displays a file selection screen.
4. Use [A], [V], [<], and [1_] to move the selection boundary to the file
you want to delete, and then press [SET].
• This will select the check box of the currently selected file.
5. Repeat step 4 to select other files, if you want. After you are finished
selecting files, press [MENU].
6. Use[A] and [V] to select "Yes" and then press [SET].
• This deletes the files you selected.
• To cancel the delete operation, select "No" in step 6 and then press [SET].
111 Viewing Snapshots and Movies

• Deleting All Files in a CS Group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [V].
This will display the "CS Frame Edit" menu.
2. Use [A] and [V] to select "Delete" and then press [SET].
3. Use [A] and [V] to select "Del Group Images" and then press [SET].
4. Use [A] and [V] to select "Yes", and then press [SET].
_ Dividing Up a CS Group
Use the following to divide up a CS Group into individual images.
• Dividing Up aSpecific CS Group
1. While a CS group is displayed or while the images of a CS group are
scrolling on the monitor screen, press [MENU].
2. Use[,] and [_.] to select the "PLAY" tab.
3. Use [A] and [V] to select "Divide Group" and then press [,].
4. Use [,] and [_.] to display the CS group you want to divide up.
5. Use [A] and [V] to select "Divide" and then press [SET].
• To divide up other CS group files, repeat steps 4 and 5.
112 Viewing Snapshots and Movies

•Dividing Up All CS Groups
-_ iMPORTANT!
•Once a CS group is divided, it cannot be regrouped.
1. While aCS group is displayed or while the images of a CS group are
scrolling on the monitor screen, press [MENU].
2. Use[4] and [b'] to select the "PLAY" tab.
3. Use[A] and [V] to select "Divide Group" and then press [,].
4. Use [A] and [V] to select "Divide All Groups" and then press [SET].
5. Use [A] and [V] to select "Yes", and then press [SET].
WCopying a CS Group Image
Use the following procedure to copy an image in a CS group to a location outside of
the group.
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [V].
This will display the "CS Frame Edit"menu.
2. Use[A] and [V] to select "Copy", and then press [SET].
3. Use [,] and [,] to display the image you want to copy.
4. Use [A] and [V] to select "Copy", and then press [SET].
_NOTE
• The functions below cannot be performed on snapshots inside a CS group. Before
using either of these functions, perform the above procedure to copy the image
first.
White Balance, Brightness, Trimming, Rotation, Resize
113 Viewing Snapshots and Movies

1. In the PLAY mode, use [,] and [_.] to scroll through the images until
the one you want is displayed.
2. Slide the zoom controller towards E¢'I (ck) to
zoom.
You can use [A], [V], [,], and [1_]to scroll the zoomed
image on the monitor screen. Slide the zoom controller
towards _ to unzoom the image.
- When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is currently
displayed.
- To exit the zoom screen, press [MENU].
- Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up to
the full 8X.
• Pressing [SET] will lock the current zoom factor for the on-screen image. You
can then use [,] and [1_]to scroll between images, using the same zoom
factor. Pressing [SET] again will unlock the zoom factor and allow you to use
[A], [V], [_] and [1_] to move around the currently displayed images. This
function cannot be used while viewing CS group images or movies. Also, CS
group images and movies will not appear when you are scrolling images with
[4] and [1_].
Zoom factor
Image area
Current display area
1. In the PLAY mode, slide the zoom controller Boundary
towards _(_).
Use [A], [V], [_] and [1_]to move the selection
boundary around the image menu.
To view a particular image, use [A], [V], [4], or [1_] to
move the selection boundary to the image you want and
then press [SET].
• In the case of a movie or a continuous shutter (CS)
file, the first frame of the file will be displayed.
114 Viewing Snapshots and Movies

1. Use the AV cable that comes with the camera to connect it to the TV.
White _ r
,J, I ,[ ,[ AV cable (bundled)
Yellow --4_ L--4_ _-- Red
___di;---] _ Terminal cover
USB/AV port
IN jack (red)
AUDIO IN jack (white)
VIDEO IN jack (yellow) Making sure that the I_ mark on the camera is
aligned with the _ mark of the AV cable connector,
connect the cable to the camera.
Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
Note that even while the connector is fully inserted, you _1--_ ,,_;;::_
still will be able to see the metal part of the connector as
shown in the illustration.
Make sure that the camera is turned off before plugging
in or unplugging the cable. Check the user
documentation that comes with the TV for information
about requirements before plugging into or unplugging
from the TV.
2. Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
115 Viewing Snapshots and Movies

.Press [1"_-I](PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera's monitor screen.
• Pressing [ON/OFF] or [It's] (REC) will not turn on the camera while the AV
cable is connected.
• You also can change the aspect ratio of the screen and the video output
system (page 168).
4. Now you can display images and play back movies as you normally do.
• Output to a TV is not supported while the camera is in the REC mode.
• When the camera is connected to a TV for movie playback, only movie images are
displayed on the TV screen. The camera's monitor screen will show on-screen
information only (without any movie image).
• Before connecting to a TV to display images, be sure to configure the camera's
[It's] (REC) and [I-_--I](PLAY) buttons for "Power On" or "Power On/Off" (page 167).
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
_NOTE
• Audio is stereo.
• Some TVs may not be able to output images and/or audio correctly.
• All icons and indicators that appear on the monitor screen also appear on the TV
screen. You can use [A] (DISP) to change the display contents.
116 Viewing Snapshots and Movies