Casio Exilim EX-Z5 User manual

E
Digital Camera
EX-Z5
User’s Guide
K816PCM1DKX
Thank you for purchasing this CASIO
product.
• Before using it, be sure to read the
precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for
future reference.
• For the most up-to-date information about
this product, visit the official EXILIM
Website at http://www.exilim.com/.

INTRODUCTION
2
Unpacking
Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your
dealer as soon as possible.
INTRODUCTION
Rechargeable Lithium
Ion Battery (NP-20)
CD-ROM USB Cable Basic Reference
Camera Strap
AV Cable
Lithium Ion Battery
Charger
(BC-11L)
AC Power Cord *
*The shape of the AC power
cord plug varies according to
country or geographic area.

INTRODUCTION
3
Contents
2INTRODUCTION
Unpacking .................................................................... 2
Features ....................................................................... 9
Precautions ................................................................ 12
17 QUICK START GUIDE
First, charge the battery! ............................................ 17
To configure display language and clock settings ..... 18
To record an image .................................................... 19
To view a recorded image .......................................... 20
To delete an image ..................................................... 20
21 GETTING READY
About This Manual ..................................................... 21
General Guide ............................................................ 22
Camera 22
Lithium Ion Battery Charger 24
Monitor Screen Contents ........................................... 25
REC Mode 25
PLAY Mode 27
Changing the Contents of the Monitor Screen 29
Attaching the Strap .................................................... 30
Power Requirements ................................................. 31
To charge the battery 31
To load the battery 34
Low Battery Indicator 36
To replace the battery 37
Power Supply Precautions 38
Turning the Camera On and Off 41
Configuring Power Saving Settings 42
Using the On-screen Menus ...................................... 44
Configuring Display Language and Clock Settings ... 46
To configure display language and clock settings 47

INTRODUCTION
4
50 BASIC IMAGE RECORDING
Recording an Image ................................................... 50
Aiming the Camera 50
Recording an Image 51
Using the easy Mode 55
Recording Precautions 57
Using Zoom ................................................................ 59
Optical Zoom 59
Digital Zoom 61
Using the Flash .......................................................... 63
Flash Unit Status 65
Changing the Flash Intensity Setting 66
Using Flash Assist 66
Using the Self-timer ................................................... 68
Specifying Image Size ............................................... 71
Specifying Image Quality ........................................... 72
74 OTHER RECORDING FUNCTIONS
Selecting the Focus Mode ......................................... 74
Using Auto Focus 75
Using the Macro Mode 78
Using Pan Focus 79
Using the Infinity Mode 79
Using Manual Focus 80
Using Focus Lock 81
Exposure Compensation (EV Shift) ........................... 82
Adjusting White Balance ............................................ 84
Configuring the White Balance Setting Manually 85
Using Continuous Shutter .......................................... 87
Normal-speed continuous shutter 88
High-speed continuous shutter 88
Flash continuous shutter 88
Using the BEST SHOT Mode .................................... 89
Displaying Sample Scenes Individually 91
Creating Your Own BEST SHOT Setup 92
To delete a BEST SHOT user setup 94
Reducing the Effects of
Hand or Subject Movement ....................................... 94
Shooting with High Sensitivity ................................... 96
Recording Images of Business Cards
and Documents (Business Shot) ............................... 97
Before recording with Business Shot 98
To use Business Shot 98
Restoring an Old Photograph .................................... 99
Before trying to restore an old photograph 99
To restore an old photograph 100
Recording a Movie ................................................... 102
Specifying Movie Image Quality 103
Recording a Movie 104
Recording Audio ....................................................... 106
Adding Audio to a Snapshot 106
Recording Your Voice 107
Using the Histogram ................................................ 109

INTRODUCTION
5
REC Mode Camera Settings .................................... 112
Assigning Functions to the [왗] and [왘] Keys 112
Turning the On-screen Grid On and Off 113
Turning Image Review On and Off 114
Using Icon Help 114
Specifying Power On Default Settings 115
Specifying ISO Sensitivity 117
Selecting the Metering Mode 118
Using the Filter Function 120
Specifying Outline Sharpness 120
Specifying Color Saturation 121
Specifying Contrast 121
Date Stamping Snapshots 122
Resetting the Camera 123
124 PLAYBACK
Basic Playback Operation ........................................ 124
Playing an Audio Snapshot 125
Zooming the Display Image ..................................... 126
Resizing an Image ................................................... 127
Cropping an Image................................................... 128
Keystone Correction ................................................ 130
Using Color Restoration to
Correct the Color of an Old Photograph .................. 131
Playing and Editing a Movie .................................... 133
Playing a Movie 133
Editing a Movie 134
Capturing a Still Image from a Movie
(MOTION PRINT) 138
Displaying the 9-image View ................................... 139
Displaying the Calendar Screen .............................. 140
Playing a Slideshow ................................................. 141
Rotating the Display Image ...................................... 144
Adding Audio to a Snapshot .................................... 145
To re-record audio 146
Playing Back a Voice Recording File ....................... 147
Displaying Camera Images on a TV Screen ........... 148
Selecting the Video Output System 150
152 DELETING FILES
Deleting a Single File ............................................... 152
Deleting All Files ...................................................... 153
154 FILE MANAGEMENT
Folders ..................................................................... 154
Memory Folders and Files 154

INTRODUCTION
6
Protecting Files ........................................................ 155
To protect a single file 155
To protect all files in memory 156
Using the FAVORITE Folder .................................... 156
To copy a file to the FAVORITE folder 156
To display a file in the FAVORITE folder 158
To delete a file from the FAVORITE folder 159
To delete all files from the FAVORITE folder 159
160 OTHER SETTINGS
Configuring Sound Settings ..................................... 160
To configure sound settings 160
To set the confirmation tone volume level 160
To set the audio volume level for movie and audio
snapshot playback 161
Specifying an Image for the Startup Screen ........... 161
Specifying the File Name
Serial Number Generation Method .......................... 162
Setting the Clock ...................................................... 163
To select your Home Time zone 163
To set the current time and date 164
Changing the Date Format 164
Using World Time ..................................................... 165
To display the World Time screen 165
To configure World Time settings 165
Editing the Date and Time of an Image ................... 166
Changing the Display Language ............................. 167
Changing the USB Port Protocol ............................. 168
Configuring [ ] (REC) and [ ] (PLAY)
Power On/Off Functions ........................................... 169
Formatting Built-in Memory ...................................... 170
171 USING A MEMORY CARD
Using a Memory Card .............................................. 172
To insert a memory card into the camera 172
To replace the memory card 173
Formatting a Memory Card 174
Copying Files ........................................................... 175
To copy all the files in built-in memory
to a memory card 176
To copy a specific file
from a memory card to built-in memory 177
178 PRINTING IMAGES
DPOF ........................................................................ 179
To configure print settings for a single image 180
To configure print settings for all images 181
Using PictBridge or USB DIRECT-PRINT ............... 183
Date Printing 187
PRINT Image Matching III ........................................... 188
Exif Print ................................................................... 188

INTRODUCTION
7
189 VIEWING IMAGES ON A COMPUTER
Using the Camera with a Windows Computer ........ 189
Using the Camera with a Macintosh Computer ....... 196
Using a Memory Card to
Transfer Images to a Computer ............................... 200
Memory Data ............................................................ 201
DCF Protocol 201
Memory Folder Structure 202
Image Files Supported by the Camera 203
205 USING THE CAMERA WITH A COMPUTER
Using the Camera with a Windows Computer ........ 205
Selecting the Software You Need 205
Computer System Requirements 207
Managing Images on a PC 208
Retouching, Reorienting, and Printing a Snapshot 211
Playing a Movie 213
Viewing User Documentation (PDF Files) 214
User Registration 214
Exiting the Menu Application 214
Using the Camera with a Macintosh Computer ....... 215
Selecting the Software You Need 215
Computer System Requirements 216
Managing Images on a Macintosh 217
Playing a Movie 218
Viewing User Documentation (PDF Files) 218
To register as a camera user 219
220 APPENDIX
Menu Reference ....................................................... 220
Indicator Lamp Reference ....................................... 223
Troubleshooting Guide ............................................. 226
If you have problems installing the USB driver... 231
Display Messages 232
CA-32 USB Cradle/AC Adaptor (Option) ................. 234
General Guide 234
Using the USB Cradle to Charge the Battery 235
Using the Photo Stand Feature 238
Using the USB Cradle to Display Images on
a TV Screen 239
Using the USB Cradle to Print Images 240
Using the USB Cradle to Connect to a Computer 241
USB Cradle Indicator Lamp Reference 246
Specifications ........................................................... 247

INTRODUCTION
8
IMPORTANT!
• The contents of this manual are subject to change
without notice.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any damage or loss resulting from
the use of this manual.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any loss or claims by third parties
which may arise due to the use or malfunction of the
EX-Z5.
• CASIO COMPUTER CO., LTD. shall not be held
liable for any damages or losses suffered by you or
any third party due to the use of Photo Loader and/or
Photohands.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any damage or loss caused by
deletion of data as a result of malfunction, repairs, or
battery replacement. Be sure to back up all important
data on other media to protect against its loss.
• Note that the example screens and product
illustrations shown in this User’s Guide may differ
somewhat by the screens and configuration of the
actual camera.
• The SD logo is a registered trademark.
• Windows, Internet Explorer, Windows Media, and
DirectX are registered trademarks of Microsoft
Corporation.
• Macintosh and QuickTime are trademarks of Apple
Computer, Inc.
• MultiMediaCard is a trademark of Infineon
Technologies AG of Germany, and licensed to the
MultiMediaCard Association (MMCA).
• Adobe and Reader are either registered trademarks
or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
• Other company, product and service names used
herein may also be trademarks or service marks of
others.
• Photo Loader and Photohands are the property of
CASIO COMPUTER CO., LTD. Except as stipulated
above, all copyrights and other related rights to these
applications revert to CASIO COMPUTER CO., LTD.

INTRODUCTION
9
Features
• 5.0 million effective pixels
• 2.5-inch TFT color LCD monitor screen
• 8.3MB built-in memory
Images can be recorded without using a memory card.
• REC mode or PLAY mode power up (page 41)
Press [ ] (REC) or [ ] (PLAY) to turn on the camera
and enter the mode you want to use.
• easy mode (page 55)
This feature eliminates troublesome setups.
• 12X zoom (page 59)
3X optical zoom, 4X digital zoom
• Flash Assist (page 66)
This feature compensates when flash intensity is not
strong enough, so images are better illuminated.
• Triple Self-timer (page 68)
The self-timer can be set up to repeat three times,
automatically.
■LCD Panel
The LCD panel is a product of the latest LCD
manufacturing technology that provides a pixel yield of
99.99%. This means that less than 0.01% of the total pixels
are defective (they do not turn on or always remain turned
on).
■Copyright Restrictions
Except for the purposes of your own personal enjoyment,
unauthorized copying of snapshot files, movie files, and
audio files violates copyright laws and international
contracts.
Distribution to third parties of such files over the Internet
without permission of the copyright holder, whether for
profit or for free, violates copyright laws and international
contracts.

INTRODUCTION
10
• Auto Macro (pages 76, 78)
Auto Macro automatically switches to the macro mode
when the distance between the camera and subject it
shorter than the Auto Focus range.
• Quick Shutter (page 76)
When you press the shutter button all the way down
without pausing, the camera immediately records the
image without waiting for Auto Focus to be performed.
This helps to avoid missing a special moment while you
wait for the camera to Auto Focus.
• Auto Focus Area Selection (page 77)
When “ Multi” is selected for the Auto Focus area, the
camera takes simultaneous meter readings at nine
different points and automatically selects the best one.
• Three continuous shutter modes (page 87)
In addition to normal-speed continuous shutter, you can
also select high-speed continuous shutter or flash
continuous shutter.
• BEST SHOT (page 89)
Simply select one of a collection of built-in sample scenes
and the camera sets up for the scene you selected. It’s
the simple way to set up for beautiful snapshots quickly
and easily. New BEST SHOT sample scenes include
setups for High Sensitivity and Anti Shake. A [BS] (BEST
SHOT) button provides direct access to BEST SHOT
sample scenes.
• Business Shot (page 97)
Business Shot automatically corrects rectangular shapes
when recording the image of a business card, document,
whiteboard, or similar subjects from an angle.
• Restoring an Old Photograph (page 99)
You can use the procedure in this section to restore an
old, faded photograph with the color provided by modern
digital camera technology.
• Movie recording with audio (page 102)
VGA size, 30 fps, Motion JPEG format
• Audio Snapshot mode (page 106)
Use this mode to record snapshots that also include
audio.
• Voice Recording (page 107)
Quick and easy recording of voice input.
• Real-time RGB histogram (page 109)
An on-screen histogram lets you adjust exposure as you
view the effect on overall image brightness, which makes
shooting under difficult lighting conditions easier than
ever before.
• Keystone Correction (page 130)
A simple operation corrects for keystoning, which occurs
when you record the image of a blackboard or poster from
an angle.

INTRODUCTION
11
• Color Correction (page 131)
Simply record the image of an old photograph to restore
its colors.
• MOTION PRINT (page 138)
Capture frames from a movie and create still images that
are suitable for printing.
• Calendar screen (page 140)
A simple operation displays a full-month calendar on the
camera’s monitor screen. Each day of the full-month
calendar shows a thumbnail of the first file recorded for
that date, which helps to make searching for a particular
file quicker and easier.
• Connect the camera to a TV and use the TV screen for
image recording and viewing (page 148)
• World Time (page 165)
A simple operation sets the current time for your current
location. You can select from among 162 cities in 32 time
zones.
• Support for SD memory cards and MMC (MultiMedia
Cards) for memory expansion (page 171)
• Digital Print Order Format (DPOF) (page 179)
Images can be printed easily in the sequence you want
using a DPOF compatible printer. DPOF can also be used
when specifying images and quantities for printing by
professional print services.
• PictBridge and USB DIRECT-PRINT support
(page 183)
Connect directly to a PictBridge or USB DIRECT-PRINT
compatible printer and you can print images without going
through a computer.
• PRINT Image Matching III Compatible (page 188)
Images include PRINT Image Matching III data (mode
setting and other camera setup information). A printer that
supports PRINT Image Matching III reads this data and
adjusts the printed image accordingly, so your images
come out just the way you intended when you recorded
them.
• Transfer images to a computer simply by connecting
the camera (pages 189, 196)
• DCF Data Storage (page 201)
DCF (Design rule for Camera File system) data storage
protocol provides image compatibility between the digital
camera and printers.

INTRODUCTION
12
Precautions
■ General Precautions
Be sure to observe the following important precautions
whenever using the EX-Z5.
All references in this manual to “camera” refer to the
CASIO EX-Z5 Digital Camera.
• Never try to take pictures or use the built-in display while
operating a motor vehicle or while walking. Doing so
creates the risk of serious accident.
• Never try to open the case of the camera or attempt your
own repairs. High-voltage internal components create the
risk of electric shock when exposed. Always leave
maintenance and repair work up to a CASIO authorized
service center.
• Keep the small parts and accessories of this camera out
of the reach of small children. If swallowed accidentally,
contact your physician immediately.
• Never fire the flash in the direction of a person operating
a motor vehicle. Doing so can interfere with the driver’s
vision and create the risk of accident.
• Bundled with Photo Loader and Photohands
(pages 208, 211, 217)
Your camera comes bundled with Photo Loader, the
popular application that automatically loads images from
your camera to your PC. It also comes with Photohands,
and application that makes image retouching quick and
easy.

INTRODUCTION
13
• Never fire the flash while it is too close to the subject’s
eyes. Intense light from the flash can cause eye damage
if it is fired too close to the eyes. This is especially true
with young children. When using the flash, the camera
should be at least one meter (3.3´) from the eyes of the
subject.
• Keep the camera away from water and other liquids, and
never let it get wet. Moisture creates the risk of fire and
electric shock. Never use the camera outdoors in the rain
or snow, at the seashore or beach, in the bathroom, etc.
• Should foreign matter or water ever get into the camera,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC power cord from the power outlet,
and contact your dealer or nearest CASIO authorized
service center. Using the camera under these conditions
creates the risk of fire and electric shock.
• Should you ever notice smoke or a strange odor coming
out of the camera, immediately turn it off. Next, taking
care you do not burn your fingers, remove the camera’s
battery and/or unplug the AC power cord from the power
outlet, and contact your dealer or nearest CASIO
authorized service center. Using the camera under these
conditions creates the risk of fire and electric shock. After
making sure there is no more smoke coming from the
camera, take it to your nearest CASIO authorized service
center for repair. Never attempt your own maintenance.
• At least once a year, unplug the AC power cord from the
power outlet and clean the area around the prongs of the
plug. Dust build up around the prongs can create the risk
of fire.
• If the camera’s case should ever become cracked due to
dropping it or otherwise subjecting it to rough treatment,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC power cord from the power outlet,
and contact your dealer or nearest CASIO authorized
service center.
• Never use the camera inside of an aircraft or in any other
area where its use is prohibited. Doing so creates the risk
of accident.
• Physical damage and malfunction of this camera can
cause the data stored in its memory to be deleted. Always
keep backup copies of data by transferring them to
personal computer memory.
• Never open the battery cover while an image is being
recorded. Doing so will not only make storage of the
current image impossible, it can also corrupt other image
data already stored in file memory.

INTRODUCTION
14
■Test for proper operation before using the
camera!
Before using the camera to record important images, make
sure you first record a number of test images and check the
results to ensure that the camera is configured correctly
and operating properly.
■Data Error Precautions
• Your digital camera is manufactured using precision
digital components. Any of the following creates the risk
of corruption of data in file memory.
— Removing the battery or memory card while the
camera is performing a record or memory access
operation
— Removing the battery, removing the memory card
while the operation lamp is still flashing green after
you turn off the camera
— Disconnecting the USB cable while a data
communication operation is being performed
— Low battery power
— Other abnormal operations
Any of the above conditions can cause an error message to
appear on the monitor screen (page 232). Follow the
instructions provided by the message to eliminate the
cause of the error.

INTRODUCTION
15
■Operating conditions
• This camera is designed for use in temperatures ranging
from 0°C to 40°C (32°F to 104°F).
• Do not use or keep the camera in the following areas.
— In areas subject to direct sunlight
— In areas subject to high humidity or dust
— Near air conditioners, heaters, or other areas subject
to temperature extremes
— Inside of a closed vehicle, especially one parked in the
sun
— In areas subject to strong vibration
■Condensation
• When you bring the camera indoors on a cold day or
otherwise expose it to a sudden change of temperature,
there is the possibility that condensation can form on the
exterior or on interior components. Condensation can
cause malfunction of the camera, so you should avoid
exposing it to conditions that might cause condensation.
• To keep condensation from forming, place the camera
into a plastic bag before moving it into a location that is
much warmer or colder than your current location. Leave
it in the plastic bag until the air inside the bag has a
chance to reach the same temperature as the new
location. If condensation does form, remove the battery
from the camera and leave the battery cover open for a
few hours.

INTRODUCTION
16
■Power Supply
• Use only the special NP-20 rechargeable lithium ion
battery to power this camera. Use of any other type of
battery is not supported.
• This camera does not have a separate battery for the
clock. The date and time will reset whenever the camera
is not supplied power by the battery for about 30 hours.
Be sure to reconfigure these settings after power is
interrupted (page 163).
• Never remove the battery from the camera while the
camera is turned on. Doing so can damage the camera. If
you mistakenly remove the battery, immediately reinsert it
into the camera and press the power button to turn power
back on.
■Lens
• Never apply too much force when cleaning the surface of
the lens. Doing so can scratch the lens surface and cause
malfunction.
• You may sometimes notice some distortion in certain
types of images, such as a slight bend in lines that should
be straight. This is due to the characteristics of lens, and
does not indicate malfunction of the camera.
■Caring for your camera
• Fingerprints, dust, or any other soiling of the lens can
interfere with proper image recording. Never touch the
lens with your fingers. You can remove dust particles
from the lens surface by using a lens blower to blow them
off. Next, wipe the surface of the lens with a soft lens
cloth.
• Fingerprints, dirt, and other foreign matter on the flash
can interfere with proper operation of the camera. Avoid
touching the flash. If the flash becomes dirty, wipe it clean
with a soft, dry cloth.
• If the exterior of the camera needs cleaning, wipe it with a
soft, dry cloth.
■Other
• The camera may become slightly warm during use. This
does not indicate malfunction.

QUICK START GUIDE
17
QUICK START GUIDE
First, charge the battery!
[CHARGE] lamp lights red
during charging.
[CHARGE] lamp goes out
when charging is complete.
T
-+
2
1
1. Charge the rechargeable litium
ion battery (NP-20) that comes
with the camera (page 31).
•It takes about 90 minutes to achieve
a full charge.
2. Load the battery into the camera.
(page 34).
1
2
3
Stopper

QUICK START GUIDE
18
1. Press the power button to turn on the camera.
2. Use [왖], [왔], [왗], and [왘] to select the language
you want.
3. Press [SET] to register the language setting.
4. Use [왖], [왔], [왗], and [왘] to select the geographical
area you want, and then press [SET].
5. Use [왖] and [왔] to select the city you want, and
then press [SET].
6. Use [왖] and [왔] to select the summer time (DST)
setting you want, and then press [SET].
7. Use [왖] and [왔] to select the date format setting
you want, and then press [SET].
8. Set the date and the time.
9. Press [SET] to register the clock settings and exit
the setting screen.
To configure display language and clock settings
• Be sure to configure the following settings before
using the camera to record images.
See page 47 for details.
• If you make a mistake when setting the language or
clock with the following procedure, you will need to
use the camera’s menu to individually change the
language (page 167) or clock (page 163) settings.
[왖]
[왔]
[왗][왘]
[SET]
2, 3, 4, 5, 6, 7, 8, 9
1

QUICK START GUIDE
19
To record an image
See page 50 for details.
1. Press [ ] (REC).
•This enters the REC (recording) mode.
2. Point the camera at the subject, use the monitor
screen to compose the image, and then press
the shutter button half way.
•When the camera finishes its Auto Focus operation, the
focus frame will turn green and the operation lamp lights
green.
3. Holding the camera still, gently press the shutter
button all the way down.
1
3
2
3
N
06
06
/ 12
12
/ 24
24
12
12
:38
38
5
Operation lamp
Focus frame
Auto recording icon
Before using a commercially available memory
card, be sure to first format it using the camera’s
formatting procedure. For details about formatting
a memory card, see page 174.

QUICK START GUIDE
20
1. Press [ ] (PLAY).
2. Press [왔] ( ).
3. Use [왗] and [왘] to display the image you want to
delete.
4. Use [왖] and [왔] to select “Delete”.
•To exit the image delete operation without deleting anything,
select “Cancel”.
5. Press [SET] to delete the image.
To delete an image
See page 152 for details.
1. Press [ ] (PLAY).
•This enters the PLAY (playback) mode.
2. Use [왗] and [왘] to scroll through the
images.
To view a recorded image
See page 124 for details.
1
2
1
2, 3, 4, 5