Casio QV 3000EX - Digital Camera - 3.3 Mpix Troubleshooting guide

R
QV-3000EX
(KX-716B)
QV-3000EX/Ir
(KX-716C/D/F)
FEB. 2000
(without price)

CONTENTS
SPECIFICATIONS ....................................................................................................................................... 1
To distinguish the model .......................................................................................................................... 3
BLOCK DIAGRAM ...................................................................................................................................... 4
CIRCUIT BLOCK......................................................................................................................................... 5
ADJUSTMENT ............................................................................................................................................ 6
1. Program version upgrading.............................................................................................................. 7
1-1. How to confirm the program (graphic menu) version.............................................................. 7
1-2. Upgrading procedure using the CompactFlash card............................................................... 7
1-3. Upgrading procedure using the PC link cable.......................................................................... 8
2. Test mode........................................................................................................................................... 9
2-1. Booting ......................................................................................................................................... 9
2-2. Item for testing............................................................................................................................. 9
3. Product conditions .......................................................................................................................... 11
3-1. Color adjustment data writing .................................................................................................. 11
3-2. Flash adjustment ....................................................................................................................... 19
3-3. Flash operation and recharge operation ................................................................................. 20
3-4. Current consumption ................................................................................................................ 21
3-5. VCOM DC adjustment................................................................................................................ 22
3-6. Operation check......................................................................................................................... 23
4. D-PCB Assy ...................................................................................................................................... 24
4-1. VCO free run frequency adjustment ........................................................................................ 24
4-2. VCOM AC adjustment and VCOM DC coarse adjustment ..................................................... 24
4-3. RGB AMP, Sub bright adjustment............................................................................................ 25
4-4. Contrast, Bright adjustments ................................................................................................... 26
4-5. Color adjustment ....................................................................................................................... 27
4-6. TINT adjustment......................................................................................................................... 28
5. PW-PCB Assy................................................................................................................................... 29
5-1. VCC3, VCC3-M, VCC5, VCC7 Voltage check ........................................................................... 29
5-2. VCC15, VEE7 Voltage check..................................................................................................... 29
5-3. BL drive voltage adjustment..................................................................................................... 29
DISASSEMBLY/ASSEMBLY .................................................................................................................... 30
EXPLODED VIEW ..................................................................................................................................... 46
PARTS LIST .............................................................................................................................................. 47
PRINTED CIRCUIT BOARDS ................................................................................................................... 49
SCHEMATIC DIAGRAMS ......................................................................................................................... 55

— 1 —
SPECIFICATIONS
File Format Still images (including panoramas): JPEG (Exif. Ver. 2.1), DCF standard (Design rule for Camera
File system), DPOF compatible, Movies: AVI
Recording Medium CompactFlash card (Type I/II)
Recorded image Size 2048 x 1536 pixels, 1024 x 768 pixels
Standard Memory Capacity,Number of Image Files,Computer Output Image Size
•The maximum length of a single movie is 10 seconds.
Image Deletion Single image; all images in a folder; all images in memory (with image protection)
Imaging Element 1/1.8-inch CCD (Total Pixels: 3.34 million, Effective Pixels; 3.24 million)
Lens F2 to 2.5; f = 7 to 21mm (equivalent to 33 to 100mm lens for 35mm film)
Zoom Optical zoom, 8X; Digital zoom: 32X (in combination with optical zoom)
Image size is 1024 x 768 pixels when digital zoom is used.
Focusing Contrast-detect Auto Focus; manual focus with macro mode and focus lock
Focus Range Normal focus: 0.3m to ∞(1´ to ∞)
Macro focus: 6cm to 30cm (2.4˝ to 11.8˝) (1X zoom)
9cm to 30cm (3.5˝ to 11.8˝) (2X zoom)
The focusing range is the distance from the lens surface to the subject.
Exposure Control Light Metering: Multi-pattern, center point, spot by CCD
Exposure: Program AE, Shutter priority AE, Aperture priority AE
Exposure
Compensation: –2EV to +2EV (1/3EV units)
Exposure Range: Approximately EV7 to EV16
Shutter CCD electronic shutter; mechanical shutter, 2 to 1/1000 second
Aperture F2 to F8, auto switching or manual switching
White Balance Automatic, fixed (4 modes), manual switching
Self-timer 10 seconds, 2 seconds
Built-in Flash Flash Modes: AUTO, ON, OFF, Red eye reduction
Flash Range: Approximately 0.5 to 4 meters (1.6´ to 13.1´)
Recording Functions One-shot, continuous, movie, panorama, landscape, night scene, portrait, self-timer, macro
Monitor 1.8" TFT, low-glare color HAST LCD (122,100 pixels, 555 x 220)
Viewfinder LCD Monitor or optical viewfinder
Clock Built-in quartz digital timepiece for time and date recording and storage with image data; auto
calendar up to 2049
Input/Output Terminals DIGITAL IN/OUT, USB port (special mini port),AC adaptor connector, VIDEO OUT (NTSC,
PAL)
Infrared Communication IrDA; IrTran-P (QV-3000EX/Ir only)
Image size
(pixels) 8 MB memory card 64MB memory card 340MB Microdrive
2048 FINE 1.4 MB/images 5 images 43 images 245 images
x NORMAL 1 MB/images 6 images 60 images 342 images
1536 ECONOMY 600 KB/images 11 images 99 images 562 images
1024 FINE 350 KB/images 19 images 167 images 943 images
x NORMAL 250 KB/images 27 images 229 images 1292 images
768 ECONOMY 150 KB/images 43 images 365 images 2054 images
Storage Capacity Approxmately 300 KB/second
Recording Time 30 seconds per movie (NORMAL)
10 seconds per movie (PAST)
Movie
Number of images
Still
Quality File size

— 2 —
Power Supply Four AA-size alkaline or lithium batteries
Four AA-size nickel-metal hydride rechargeable batteries (NP-H3)
AC adaptor (AD-C620)
AC adaptor charger (BC-3HA)
Battery Life The values noted below indicate the number of hours before battery failure under normal
operating temperature (25°C). These values are for reference only, and do not guarantee that
any particular set of batteries actually will provide the service life indicated. Low temperatures
shorten battery life.
• The above figures are approximations only.
• The above guidelines are based on the following battery types:
Alkaline: MX1500 (AA) DURACELL ULTRA
Lithium: Energizer
• Battery life varies with brand.
Continuous recording values show the number of shots without using the flash. The number of
shots depends on use of the flash and whether flash is turned on or off.
Power Consumption Approximately 6.6W
Dimensions 134.5(W) x 80.5(H) x 57.5(D) mm (5.3˝(W) x 3.2˝(H) x 2.3˝(D))
Weight Approximately 320g (11.2 oz) (excluding batteries)
Standard Accessories Neck strap; lens cap; cap holder; soft case; USB cable; video cable; User’s Manual
AA-size Lithium
Batteries FR6
Approximately 270
minutes
Approximately 900
shots
Type of
Operation
Continuous
Playback
Continuous
Recording
AA-size Alkaline
Batteries LR6
Approximately 145
minutes
Approximately 210
shots
•This camera does not have a separate battery to power its clock. Clock settings are cleared whenever power to the camera is
cut off (by batteries going dead while the camera is not connected to an AC power outlet with the AC adaptor) for about 24
hours. After power is resumed, either by loading fresh batteries or connecting to an AC power outlet, you will have to set the
correct time and date again.
•The liquid crystal panel built into this camera is the product of precision engineering, with a pixel yield of 99.99%. This also
means, however that 0.01% of the pixels can be expected to fail to light or to remain lit at all times.
AA-size Ni-MH
Batteries NP-H3
Approximately 170
minutes
Approximately 660
shots

— 3 —
To distinguish the model
MODE
REC OFF PLAY
MF/ / /
T
W
MENU
SET DISP
PREVIEW
MODE
MF/ / /
Infra-red transmission button.
Infra-red transmission button.
QV-3000EX/Ir (KX-716C/D/F)
QV-3000EX (KX-716B) for U.S.A
T
W
MENU
SET DISP
MODE
MF/ /
REC OFF PLAY
PREVIEW
MODE
MF/ /
Discriminate between infra-red model and non-infra-red model by the following points.

— 4 —
BLOCK DIAGRAM
KA-
PCB
TELE
WIDE
DISP
PREVIEW
SUB-LCD
SUB-PCB
51pin
RTC
RTC-4574
SUB
Microprocessor
HD404889
BACK UP
Capacitor
4.0 MHz
KB-
PCB
+ , –
ENTER
MENU
3pin 4pin
80pin
CF
VCC7
(8.0V)
BLVCC
(5.4V)
VCC3
(3.3V)
DOWN
Converter
CCD/LCD
Power
VCC15
(15.0V)
VEE7
(-7.5V)
VCC5
(5.0V)
CF
LED
IrDA
Controller
48.0MHz
CCD-FPC
KEY
MODE TIMER MACRO
FLASH
SHUTTER(Half/Full)
BL UNIT
3pin
D-PCB
26pin
LCD Module
VDD: 3.3V
VGH: 15.0
VGL: -15.0V
VSH: 5.0V
CDS/AGC/ADCAD9803
MPU
LR38664Y
TFT
Controller
CM7019L3
Chroma I/F
IR3Y29B
29.5 MHz 24.0 MHz
24.5454 MHz
SDRAM
(64M X 2)
FLASH/
MASK
(16M)
EEPROM
(4K)
TGCXD2497R
36.0 MHz
5.0 MHz
MD
Microprocessor
SW
CF
Controller
6pin
16pin
19pin
CCD
LENS BLOCK
Canon
Zoom X 3
FINDER
UNIT
ICX252AQ
3.58 MHz
REG
Vertical/Horizontal
Sensor
EVCC(3.3V)
AF DRIVER
IRIS/SHUTTER
DRIVER
ZOOM DRIVER
BUS BUFFER
TC74AC367 X 2
SW-PCB
BL-PCB
VCC3-M
(3.4V)
PW-PCB
AC
Flashing
Controller
Photp
Sensor
ADPT
ST-PCB
10pin
B to B
10pin
Charging
Booster
SJ-PCB
FLASH
FOCUS
LED
SERIAL BUFFER
VIDEO DRIVER
USB TRANSCEIVER
Buzzer
REC/
PLAY /
OFF
SHUTTE
R
LED-PCB
SELF
LED
VCC5
(5.0V)
CF
SW
왕,왓
Flash
Control
Motor system
step-down
transformer
LCD booster
BL booster
Logic circuit
step-down
transformer

— 5 —
CIRCUIT BLOCK
PCB Circuit Block Outline Main Devices Note
PW LCD Power Supply 7.5V Up Converter XC6367B101MR Newly employed part
BL Power Supply 5.4V Up Converter XC6367A542MR Newly employed part
Main Power Supply 3.3V Non adjustable step down transformer XC6365A333MR Newly employed part
CCD 5V Power Supply 5.0V Voltage regulator XC62ER5002MR Newly employed part
LCD Power Supply
Flash Control Power
Video Driver Power Supply
CCD & LCD Power Supply Power specifications (+15V, -7.5V) MAX685EEE Used on QV-8000SX
Lens Unit AP Power 3.3V Non adjustable step down transformer XC6365B103MR Newly employed part
Lens Unit Zoom Power
Lens Unit AE Power
Charging Booster Circuit 300V Booster Used on QV-8000SX
Current control circuit
Charging control circuit
Charging Comparator Light emission control circuit Used on QV-8000SX
CF Connector Complying to TYPE-II (Reverse insertion) Used on QV-2000UX
D MPU Processor Interface LR38664Y Newly employed part
Serial Interface CSP package
CCD Interface
NTSC/PAL Encoder
JPEG
DMA Controller
BUS Interface
Flash Memory 16 Mbit (1 M X 16 bit) Flash Memory LH28F160S3B Compatible with the Mask ROM
(Mask ROM) CSP package
SDRAM 64 Mbit ( 1 Mword X 16 bit X 4 bank) X 2 K4S641632C-TL1 and others
CF Controller CF controller and I/O interface uPD65839GC Used on QV-2000UX
TFT-LCM 1.8" high definition TFT (HAST) C0D18T1035FN Newly employed part
LCD Controller Complying to high definition TFT (HAST) CM7019L3-T4N Newly employed part
3.0V driver
Chroma Interface +5V/+7.5V source, C-VIDEO input IR3Y29BM Used on QV-770
Brightness fixed
Stand-by power 3.3V three-terminal regulator XC62FP3302MR Newly employed part
8-bit MPU Driving motor control D780034AGK-A03-8A8
Flash ROM built in -> Mask ROM after MP
EEPROM 4Kbit (256word x 16bit) BR93LC66FV-E2 Used on QV-2000UX
AF//ZOOM AF ZOOM is 1-2-phase excitation LB1846M Newly employed part
Motor driver AE is 2-phase excitation
Shutter/ AE driver LB1837M-TE-L Newly employed part
USB tranceiver PDIUSB11AP Used on QV-8000SX
Video 75 ohm dirver TK15405MTL Used on QV-8000SX
Serial transport driver Used on QV-7000SX
TG/V/H driver for 3340 thousand picture element CCD (35.0MHz clock) CXD2497R Newly employed part
CDS/AGC/ADC CDS AD9803JSTRL Used on QV-8000SX
11bit Programmable Gain Amplifier
10-bit A/D converter
Vertical/Horizontal sensor 4-way tilt sensor Alps electronics Used on QV-2000UX
SUB IrDA Controller IrDA Controller and Serial Controller PC87109VBE Used on QV-7000SX
IrDA Module Small-type IrDA moule (IrDA1.1) HSDL-3600 Used on QV-2000UX
4bit Microprocessor Power ON sequence HD404889
(Mask ROM) Key scanning
Beep control
I/O and others
RTC Built-in 32KHz clock real time clock RTC-4574JE Used on QV-2000UX
Backup Capacitor Watch backup (24H) EECS0HD104H Used on QV-2000UX
SUB-LCD Used on QV-2000UX
BL Inverter Circuit BL unit Used on QV-2000UX
SW PW ON/OFF Newly employed part
BB-PCB Board-toBoard connection PCB Used on QV-2000UX
KEY SW KA-PCB, KB-PCB
CCD CCD 1/1.8 inch, 3,340,000 picture element ICX252AQ Newly employed part

— 6 —
ADJUSTMENT
■ Preparation
1. PC (IBM Compatible)/OS:Windows 95/98
2. Link cable.
3. Adjustment program
1) ADJ716.EXE (Color adjustment data transfer program)
2) FLOAD.EXE (Camera unit version up program)
3) _ROM.BIN (Camera unit program data)
4) _GMENU.BIN (Camera unit menu display data)
4. AC adaptor or stabilizer
5. Digital oscilloscope
6. Multimeter
7. Ammeter
8. Frequency counter
9. TV (with video terminal)
10. Video cable
11. Battery (battery operation/battery cover lock)
12. PC link program : Photo Loader (Communication function confirmation)
13. USB cable/USB driver (USB function confirmation)
14. Test chart (for photography check)
That which carried out color printing of picture data "CHART1.JPG" and the "CHART2.JPG".
CHART2.JPGCHART1.JPG

— 7 —
1. Program version upgrading
In the camera unit, program and graphic menu are stored.
Please check the version and update it if the version is not updated.
There are two method of program updating; using CompactFlash card or utilizing PC link cable.
Note:
1. Be sure to use AC adaptor.
PCB D becomes unusable if power down or an error occurs during program transmission.
2. Unit using a mask cannot update the program.
1-1. How to confirm the program (graphic menu) version
1. Boot the test mode.
Turn the power on while pressing DISP and MENU buttons simultaneously.
2. Check the LCD display.
(Example)
TEST MODE
PROG 00. 02. 04. 13. 49 rProgram version
GMENU 99. 12. 27. 18. 12 rGraphic menu version
· · · ·
1-2. Upgrading procedure using the CompactFlash card
(1) Copy the latest program ( _ROM.BIN) and graphic menu ( _GMENU.BIN) on a CompactFlash card
then set the CompactFlash card on the camera.
(2) Connect an AC adaptor on the camera.
(3) Boot the test mode.
Turn the power on while pressing DISP and MENU keys simultaneously.
(4) Camera's display shows the followings.
It is normal if two OK's are shown after about 1 minute.
After then, the camera is set on the Camera mode automatically.
SIZE OK 666464
SIZE OK 1305532
(5) Turn the camera off.
(6) Chgange the CompactFlash card with the one for picture taking.
(7) Boot the test mode and confirm the program version.
Turn the power on while pressing DISP and MENU buttons.
(8) Finally, check the camera's function (shooting and playback).

— 8 —
1-3. Upgrading procedure using the PC link cable
(1) Turn the camera off and extract CompactFlash card.
(2) Connect PC link cable.
(3) Boot the transmission program (FLOAD.EXE).
(4) Choose program file ( _ROM.BIN) or graphic menu file ( _GMENU.BIN).
(5) Select data transmission speed (115K/57K/38K).
(If errors occur, lower the transmission speed.)
(6) Click Progress button.
(7) Connect an AC adaptor on the camera and turn the camera on.
(8) Data transmission starts.
(9) Data transmission is completed normally when Status box shows "program complete."
(10) Disconnect AC adaptor plug (cannot be turned off by the power switch).
(11) Change the CompactFlash card with one for shooting.
(12) Boot the test mode and confirm the version.
Turn the camera on while pressing DISP and MENU buttons.
(13) Shoot a picture and confirm the camera function (shooting and playback.)

— 9 —
2. Test mode
Note: Do not perform the menu item unless explained here. (It may damage the internal data and
camera becomes unusable.)
2-1. Booting
To boot the test mode;
Turn the camera on while pressing DISP and MENU buttons.
To boot MENU1
Press PREVEIW ➜PREVEIW ➜MENU keys in order rapidly.
To boot MENU2
Press FLASH ➜FLASH ➜MENU keys in order rapidly.
* To execute
Use + or – keys to select a test item then press shutter button to execute it.
To boot MENU3
Press SELF ➜SELF ➜MENU keys in order rapidly.
2-2. Item for testing
1TEST MODE
2MENU1
MENU1
1.
2.
3.
4.
5.
6.
7.
8.
INIT.NTSC JAPANESE
LED+SUBLCD
INIT.NTSC ENGLISH
CROSS HATCH
ANG DET CHECK
INIT.PAL ENGLISH
COLOR BAR
50PERCENT GRAY
TEST MODE
PROG 99.08.16.13.38
GMENU 99.07.12.15.04
LOADER 0X00000007
ADJ
MOTOR 0X0000011A
POWER 0X1A
CCD ADJ1 YES
CCD ADJ2 YES
STROBE ADJ YES
ZOOM ADJ YES
FOCUS ADJ YES
•TEST MODE
•PROGRAM Version
•Graphic Menu Version
•Loader Version
•ADJ Version
•Motor MCU Version
•Power MCU Version
•CCD ADJUST 1 (Yes/No/NG)
•CCD ADJUST 2 (Yes/No/NG)
•STROBE ADJUST (Yes/No/NG)
•ZOOM ADJUST (Yes/No/NG)
•FOCUS ADJUST (Yes/No/NG)
Shown in green if all the adjustments
have been done.
YES when adjustments are completed.
NO when adjustments are incomplete.
NG if adjustments are failed.

— 10 —
3MENU2
MENU2
1.
2.
3.
4.
5.
6.
7.
8.
9.
CCD ADJ ALL
ZOOM ADJUST
CCD1 (AWB AGC)
CCD2 (APATURE)
CCD3 (SHUTTER)
KIZU
IRDA MASTER
FOCUS ADJUST
STOROBE ADJUST
MENU3 1/3
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
DISPLAY LENS ADJ
REC INFO
BATT.TEST
PROG+GMENU UPDATE
PROG UPDATE
GMENU UPDATE
CHECK SUM
OSD DATA CHECK
ERROR MESSAGE CHECK
SDRAM CHECK
MENU3 3/3
21.
22.
23.
24.
25.
26.
27.
SHUTTER CLOSE REC
SHUTTER SPEED CONST
GRAY SCALE (10STEP)
WHITE
BLACK
IRDA SLAVE
IRDA FACTORY SLAVE
MENU3 2/3
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
KEY CHECK
LED CHECK
CF CHECK
SUB LCD CHECK
CF WRITE TEST
AF DATA SAVE
EEPROM TEST
ADJ CLEAR
NOISE CAPTURE
BAYER CAPTURE
4MENU3

— 11 —
3. Product conditions
Note: Help command on adjustment window cannot be used as it uses Japanese system.
3-1. Color adjustment data writing
1. Summary
(1) QV-3000EX is a high quality digital camera and makeshift adjustments cannot cover the quality of the
camera's picture.
Therefore, we have prepared set of lens ass'y that is adjusted precisely in the factory and a floppy disc
containing the lens'es adjustment data as spare parts.
(2) These adjustment data are stored in the EEPROM on PCB D.
2. Repairs
It is necessary to write color adjustment data for the replacements of the following units.
(1) Lens ass'y
(2) PCB D (when EEPROM contents can be read)
(3) PDB D and lens ass'y (when EEPROM contents cannot be read)
3. To replace the lens ass'y
(1) Connect AC adaptor and PC link cable to the camera.
Note: Connect the link cable to serial port COM1.
(2) Turn the camera on to set it on PLAY mode.
(3) Boot adjustment program ADJ716.EXE.
At this time, each adjustment data are 0.

— 12 —
(4) Read the adjustment data of before repairs.
Click the Receipt button. “receive OK” will be indicated and adjustment data are shown.
Reference: At this time you can save the adjustment data in your PC.
File (F) ➜Save as (A)
Select the drive and name the file then save it.
(Note: Do not forget to put extension code ".ADJ".)
(5) Write down the following numbers.
agc-6ab
strobe-pwm
(6) Replace the lens ass'y.
(Adjusted in the factory and comes with adjustment data)
(7) Connect AC adaptor and PC link cable to the camera.
(8) Turn the camera on and set it on PLAY mode.
(9) Boot the adjustment program (ADJ716.EXE).

— 13 —
(10) Insert the floppy disc containing adjustment data of the lens ass'y in your PC and read the data.
File (F) ➜Open (O)
Select FDD
Select adjustment data file with extension code .ADJ.
* Adjustment data file name: 9999999.ADJ
* 9999999 is the 7-digit number written on the seal stuck on the side of the lens unit.
(11) Change the following data with the number you have written on step 5 (data before replacing the lens
unit).
Caution: Never change the other data.
Agc-6db
Strobe-pwm
(12) Add the sum of three numerals agc-6db:206, white-Rgain, and white-Bgain on the checksum.
(Example) agc_6db : 206
+
white_Rgain : 78
+
white_Bgain : 163
||
checksum : 447
Note: If erroneous nuber is input, color adjustment cannot be done.
(13) Transfer the data to the camera.
Click Trans button on ADJ window.
“send OK” will be shown.

— 14 —
(14) Turn the camera off.
(15) Booting the test mode, be sure that each adjustment item is YES.
Power on while pressing DISP and MENU keys simultaneously.
STROBE
KIZU
ZOOM
FOCUS
YES
YES
YES
YES
CCD1
CCD2
CCD3
YES
YES
YES
(16) Check the camera operation by shooting a picture and play it back.

— 15 —
4. To replace PCB D (in case the contents of EEPROM can be read)
(1) Connect AC adaptor and PC link cable to the camera.
Note: Connect the link cable to serial port COM1.
(2) Turn the camera on to set it on PLAY mode.
(3) Boot adjustment program ADJ716.EXE.
At this time, each adjustment data are 0.
(4) Read the adjustment data of before repairs.
Click the Receipt button. "receive OK" will be indicated and adjustment data are shown.
(5) Save the adjustment data in the PC.
File (F) ➜Save as (A)
Select a drive to save data.
Name a file name then save the data.
(It is better to name the camera's serial number as the file name.)
XXXXXXXX.ADJ (Note: do not forget the extension code .ADJ.)
(6) Replace the PCB D
(7) Connect AC adaptor and PC link cable to the camera.
(8) Turn the camera on and set it on PLAY mode.
(9) Boot the adjustment program (ADJ716.EXE).

— 16 —
(10) Load the saved data of the lens unit.
(11) Transfer the data to the camera.
Click Trans button on ADJ window.
“send OK” will be shown.
(12) Turn the camera off.
(13) Booting the test mode, be sure that each adjustment item is YES.
Power on while pressing DISP and MENU keys simultaneously.
STROBE
KIZU
ZOOM
FOCUS
YES
YES
YES
YES
CCD1
CCD2
CCD3
YES
YES
YES
(14) Check the camera operation by shooting a picture and play it back.

— 17 —
5. In case of replacing PCB D and lens ass'y (EEPROM on PCB D contents cannot be read)
(1) Replace PCB D and lens ass'y.
(2) Connect AC adaptor and PC link cable to the camera.
Note: Connect the link cable to serial port COM1.
(3) Turn the camera on to set it on PLAY mode.
(4) Boot adjustment program ADJ716.EXE.
At this point, adjustment data of each item is zero.
(5) Insert the floppy disc containing adjustment data of the lens ass'y in your PC and read the data.
File (F) ➜Open (O)
Select FDD
Select adjustment data file with extension code .ADJ.and load it.
(6) Transfer the adjustment data to the camera.
Clock Trans button on ADJ program window.
Send OK. Will be shown.

— 18 —
(7) Turn the camera off.
(8) Booting the test mode, be sure that each adjustment item is YES.
Power on while pressing DISP and MENU keys simultaneously.
STROBE
KIZU
ZOOM
FOCUS
YES
YES
YES
YES
CCD1
CCD2
CCD3
YES
YES
YES
(9) Perform the function check (Record/Playback).
(10) Perform the flash adjustment.